From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751650AbdAaFyY (ORCPT ); Tue, 31 Jan 2017 00:54:24 -0500 Received: from mail.linuxfoundation.org ([140.211.169.12]:60978 "EHLO mail.linuxfoundation.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751401AbdAaFvA (ORCPT ); Tue, 31 Jan 2017 00:51:00 -0500 From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman , stable@vger.kernel.org, Laurent Pinchart , Mauro Carvalho Chehab Subject: [PATCH 4.9 46/66] [media] v4l: tvp5150: Dont override output pinmuxing at stream on/off time Date: Tue, 31 Jan 2017 06:36:50 +0100 Message-Id: <20170131053605.108813608@linuxfoundation.org> X-Mailer: git-send-email 2.11.0 In-Reply-To: <20170131053603.098140622@linuxfoundation.org> References: <20170131053603.098140622@linuxfoundation.org> User-Agent: quilt/0.65 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org 4.9-stable review patch. If anyone has any objections, please let me know. ------------------ From: Laurent Pinchart commit 79d6205a3f741c9fb89cfc47dfa0eddb1526726d upstream. The s_stream() handler incorrectly writes the whole MISC_CTL register to enable or disable the outputs, overriding the output pinmuxing configuration. Fix it to only touch the output enable bits. The CONF_SHARED_PIN register is also written by the same function, resulting in muxing the INTREQ signal instead of the VBLK/GPCL signal on the INTREQ/GPCL/VBLK pin. As the driver doesn't support interrupts this is obviously incorrect, and breaks operation on other devices. Fix it by removing the write. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman --- drivers/media/i2c/tvp5150.c | 31 ++++++++++++++++++------------- 1 file changed, 18 insertions(+), 13 deletions(-) --- a/drivers/media/i2c/tvp5150.c +++ b/drivers/media/i2c/tvp5150.c @@ -1055,22 +1055,27 @@ static const struct media_entity_operati static int tvp5150_s_stream(struct v4l2_subdev *sd, int enable) { struct tvp5150 *decoder = to_tvp5150(sd); - /* Output format: 8-bit ITU-R BT.656 with embedded syncs */ - int val = TVP5150_MISC_CTL_YCBCR_OE | TVP5150_MISC_CTL_CLOCK_OE; + int val; - /* Output format: 8-bit 4:2:2 YUV with discrete sync */ - if (decoder->mbus_type == V4L2_MBUS_PARALLEL) - val = TVP5150_MISC_CTL_YCBCR_OE | TVP5150_MISC_CTL_SYNC_OE - | TVP5150_MISC_CTL_CLOCK_OE; + /* Enable or disable the video output signals. */ + val = tvp5150_read(sd, TVP5150_MISC_CTL); + if (val < 0) + return val; - /* Initializes TVP5150 to its default values */ - /* # set PCLK (27MHz) */ - tvp5150_write(sd, TVP5150_CONF_SHARED_PIN, 0x00); + val &= ~(TVP5150_MISC_CTL_YCBCR_OE | TVP5150_MISC_CTL_SYNC_OE | + TVP5150_MISC_CTL_CLOCK_OE); - if (enable) - tvp5150_write(sd, TVP5150_MISC_CTL, val); - else - tvp5150_write(sd, TVP5150_MISC_CTL, 0x00); + if (enable) { + /* + * Enable the YCbCr and clock outputs. In discrete sync mode + * (non-BT.656) additionally enable the the sync outputs. + */ + val |= TVP5150_MISC_CTL_YCBCR_OE | TVP5150_MISC_CTL_CLOCK_OE; + if (decoder->mbus_type == V4L2_MBUS_PARALLEL) + val |= TVP5150_MISC_CTL_SYNC_OE; + } + + tvp5150_write(sd, TVP5150_MISC_CTL, val); return 0; }