public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Sean Paul <seanpaul@chromium.org>
To: Chris Zhong <zyw@rock-chips.com>
Cc: mark.rutland@arm.com, devicetree@vger.kernel.org,
	pawel.moll@arm.com, yzq@rock-chips.com,
	linux-kernel@vger.kernel.org, dianders@chromium.org,
	dri-devel@lists.freedesktop.org, tfiga@chromium.org,
	linux-rockchip@lists.infradead.org, robh+dt@kernel.org,
	galak@codeaurora.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v3 3/5] drm/rockchip/dsi: remove mode_valid function
Date: Wed, 1 Feb 2017 13:12:18 -0500	[thread overview]
Message-ID: <20170201181218.GA8595@art_vandelay> (raw)
In-Reply-To: <5886BB8F.6040707@rock-chips.com>

On Tue, Jan 24, 2017 at 10:27:27AM +0800, Chris Zhong wrote:
> Hi Sean
> 
> On 01/24/2017 01:48 AM, Sean Paul wrote:
> >On Fri, Jan 20, 2017 at 06:10:49PM +0800, Chris Zhong wrote:
> >>The MIPI DSI do not need check the validity of resolution, the max
> >>resolution should depend VOP. Hence, remove rk3288_mipi_dsi_mode_valid
> >>here.
> >Does vop actually enforce this, though? I see that mode_config.max_width is
> >4096, but there is no bounds checking in mode_fixup().
> >
> >The connector is currently rejecting everything greater than 2047. So I think
> >you're going to regress behavior here.
> >
> >Sean
> The mipi controller has not this width limit, it depend the VOP,
> such as RK3399, VOP_LIT only support 2560,
> but VOP_BIG support 4K. So this driver should check the width here.

I don't see anything in the vop driver that rejects large modes for little vop.
So, while I agree the check shouldn't be here, you should move it to where it
should be instead of removing it entirely.

Sean

> 
> >
> >
> >>Signed-off-by: Chris Zhong <zyw@rock-chips.com>
> >>---
> >>
> >>Changes in v3: None
> >>
> >>  drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 39 ----------------------------------
> >>  1 file changed, 39 deletions(-)
> >>
> >>diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> >>index a93ce97..6f0e252 100644
> >>--- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> >>+++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> >>@@ -278,8 +278,6 @@ struct dw_mipi_dsi_plat_data {
> >>  	u32 grf_dsi0_mode;
> >>  	u32 grf_dsi0_mode_reg;
> >>  	unsigned int max_data_lanes;
> >>-	enum drm_mode_status (*mode_valid)(struct drm_connector *connector,
> >>-					   struct drm_display_mode *mode);
> >>  };
> >>  struct dw_mipi_dsi {
> >>@@ -1081,23 +1079,8 @@ static int dw_mipi_dsi_connector_get_modes(struct drm_connector *connector)
> >>  	return drm_panel_get_modes(dsi->panel);
> >>  }
> >>-static enum drm_mode_status dw_mipi_dsi_mode_valid(
> >>-					struct drm_connector *connector,
> >>-					struct drm_display_mode *mode)
> >>-{
> >>-	struct dw_mipi_dsi *dsi = con_to_dsi(connector);
> >>-
> >>-	enum drm_mode_status mode_status = MODE_OK;
> >>-
> >>-	if (dsi->pdata->mode_valid)
> >>-		mode_status = dsi->pdata->mode_valid(connector, mode);
> >>-
> >>-	return mode_status;
> >>-}
> >>-
> >>  static struct drm_connector_helper_funcs dw_mipi_dsi_connector_helper_funcs = {
> >>  	.get_modes = dw_mipi_dsi_connector_get_modes,
> >>-	.mode_valid = dw_mipi_dsi_mode_valid,
> >>  };
> >>  static void dw_mipi_dsi_drm_connector_destroy(struct drm_connector *connector)
> >>@@ -1168,33 +1151,11 @@ static int rockchip_mipi_parse_dt(struct dw_mipi_dsi *dsi)
> >>  	return 0;
> >>  }
> >>-static enum drm_mode_status rk3288_mipi_dsi_mode_valid(
> >>-					struct drm_connector *connector,
> >>-					struct drm_display_mode *mode)
> >>-{
> >>-	/*
> >>-	 * The VID_PKT_SIZE field in the DSI_VID_PKT_CFG
> >>-	 * register is 11-bit.
> >>-	 */
> >>-	if (mode->hdisplay > 0x7ff)
> >>-		return MODE_BAD_HVALUE;
> >>-
> >>-	/*
> >>-	 * The V_ACTIVE_LINES field in the DSI_VTIMING_CFG
> >>-	 * register is 11-bit.
> >>-	 */
> >>-	if (mode->vdisplay > 0x7ff)
> >>-		return MODE_BAD_VVALUE;
> >>-
> >>-	return MODE_OK;
> >>-}
> >>-
> >>  static struct dw_mipi_dsi_plat_data rk3288_mipi_dsi_drv_data = {
> >>  	.dsi0_en_bit = RK3288_DSI0_SEL_VOP_LIT,
> >>  	.dsi1_en_bit = RK3288_DSI1_SEL_VOP_LIT,
> >>  	.grf_switch_reg = RK3288_GRF_SOC_CON6,
> >>  	.max_data_lanes = 4,
> >>-	.mode_valid = rk3288_mipi_dsi_mode_valid,
> >>  };
> >>  static struct dw_mipi_dsi_plat_data rk3399_mipi_dsi_drv_data = {
> >>-- 
> >>2.6.3
> >>
> >>_______________________________________________
> >>dri-devel mailing list
> >>dri-devel@lists.freedesktop.org
> >>https://lists.freedesktop.org/mailman/listinfo/dri-devel
> 
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Sean Paul, Software Engineer, Google / Chromium OS

  reply	other threads:[~2017-02-01 18:12 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-20 10:10 [PATCH v3 0/5] Rockchip dw-mipi-dsi driver Chris Zhong
2017-01-20 10:10 ` [PATCH v3 1/5] dt-bindings: add rk3399 support for dw-mipi-rockchip Chris Zhong
2017-01-20 10:10 ` [PATCH v3 2/5] drm/rockchip/dsi: dw-mipi: support RK3399 mipi dsi Chris Zhong
2017-01-23 17:30   ` Sean Paul
2017-01-20 10:10 ` [PATCH v3 3/5] drm/rockchip/dsi: remove mode_valid function Chris Zhong
2017-01-23 17:48   ` Sean Paul
2017-01-24  2:27     ` Chris Zhong
2017-02-01 18:12       ` Sean Paul [this message]
2017-02-05  3:42         ` Chris Zhong
2017-02-05  7:42           ` Mark yao
2017-01-20 10:10 ` [PATCH v3 4/5] dt-bindings: add power domain node for dw-mipi-rockchip Chris Zhong
2017-01-20 10:10 ` [PATCH v3 5/5] drm/rockchip/dsi: add dw-mipi power domain support Chris Zhong
2017-01-23 18:03   ` Sean Paul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170201181218.GA8595@art_vandelay \
    --to=seanpaul@chromium.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=galak@codeaurora.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=tfiga@chromium.org \
    --cc=yzq@rock-chips.com \
    --cc=zyw@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox