From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751263AbdBBJzm (ORCPT ); Thu, 2 Feb 2017 04:55:42 -0500 Received: from mail.linuxfoundation.org ([140.211.169.12]:57348 "EHLO mail.linuxfoundation.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750985AbdBBJzk (ORCPT ); Thu, 2 Feb 2017 04:55:40 -0500 Date: Thu, 2 Feb 2017 10:55:41 +0100 From: Greg KH To: Lee Jones Cc: jslaby@suse.com, linux-serial@vger.kernel.org, dt@kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, kernel@stlinux.com, patrice.chotard@st.com Subject: Re: [PATCH v2 00/10] serial: st-asc: Allow handling of RTS line Message-ID: <20170202095541.GB30437@kroah.com> References: <20170127172804.23881-1-lee.jones@linaro.org> <20170202074236.ni3tozz3er4g3t64@dell> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20170202074236.ni3tozz3er4g3t64@dell> User-Agent: Mutt/1.7.2 (2016-11-26) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Thu, Feb 02, 2017 at 07:42:36AM +0000, Lee Jones wrote: > Hi Greg, Jiri, > > > When hardware flow-control is disabled, manual toggling of the UART's > > reset line (RTS) using userland applications (e.g. stty) is not > > possible, since the ASC IP does not provide this functionality in the > > same was as some other IPs do. Thus, we have to do this manually. > > > > This set ensures the correct Pinctrl groups are configured and > > obtained for both manual toggling of the RTS line and for the IP to > > take over the lines when HW flow-control is requested by the user. > > > > Lee Jones (10): > > serial: st-asc: Ignore the parity error bit if 8-bit mode is enabled > > serial: st-asc: Provide RTS functionality > > serial: st-asc: Read in all Pinctrl states > > serial: st-asc: (De)Register GPIOD and swap Pinctrl profiles > > serial: st-asc: Use generic DT binding for announcing RTS/CTS lines > > dt-bindings: serial: Update 'uart-has-rtscts' description > > ARM: dts: STiH410-b2260: Identify the UART RTS line > > ARM: dts: STiH407-pinctrl: Add Pinctrl group for HW flow-control > > ARM: dts: STiH407-family: Use new Pinctrl groups > > ARM: dts: STiH410-b2260: Enable HW flow-control > > > > .../devicetree/bindings/serial/serial.txt | 3 +- > > arch/arm/boot/dts/stih407-family.dtsi | 3 +- > > arch/arm/boot/dts/stih407-pinctrl.dtsi | 12 ++- > > arch/arm/boot/dts/stih410-b2260.dts | 5 + > > drivers/tty/serial/st-asc.c | 101 +++++++++++++++++++-- > > 5 files changed, 110 insertions(+), 14 deletions(-) > > Looks like everyone is happy with the set. > > Are you planning to merge it? I'll take it in my next round of patches, give me a few days to sync up, I normally do serial patches once a week or so. thanks, greg k-h