From: Alison Schofield <amsfield22@gmail.com>
To: simran singhal <singhalsimran0@gmail.com>
Cc: lars@metafoo.de, Michael.Hennerich@analog.com, jic23@kernel.org,
Hartmut Knaack <knaack.h@gmx.de>,
Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-iio@vger.kernel.org, devel@driverdev.osuosl.org,
linux-kernel@vger.kernel.org, outreachy-kernel@googlegroups.com
Subject: Re: [Outreachy kernel] [PATCH] staging: adis16060_core: Use private driver lock instead of mlock
Date: Sun, 12 Mar 2017 09:24:00 -0700 [thread overview]
Message-ID: <20170312162359.GB2873@d830.WORKGROUP> (raw)
In-Reply-To: <20170312131052.GA21816@singhal-Inspiron-5558>
On Sun, Mar 12, 2017 at 06:40:52PM +0530, simran singhal wrote:
> The IIO subsystem is redefining iio_dev->mlock to be used by
> the IIO core only for protecting device operating mode changes.
> ie. Changes between INDIO_DIRECT_MODE, INDIO_BUFFER_* modes.
>
> In this driver, mlock was being used to protect hardware state
> changes. Replace it with a lock in the devices global data.
>
> Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Hi Simran,
These are now IIO tasks for this round of Outreachy. Please
follow the directions on the IIO task page w.r.t. claiming,
sending, and all.
Thanks,
alisons
> ---
> drivers/staging/iio/gyro/adis16060_core.c | 8 +++++---
> 1 file changed, 5 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/staging/iio/gyro/adis16060_core.c b/drivers/staging/iio/gyro/adis16060_core.c
> index c9d46e7..90a3a18 100644
> --- a/drivers/staging/iio/gyro/adis16060_core.c
> +++ b/drivers/staging/iio/gyro/adis16060_core.c
> @@ -29,11 +29,13 @@
> * @us_r: actual spi_device to read back data
> * @buf: transmit or receive buffer
> * @buf_lock: mutex to protect tx and rx
> + * @lock: protect sensor state
> **/
> struct adis16060_state {
> struct spi_device *us_w;
> struct spi_device *us_r;
> struct mutex buf_lock;
> + struct mutex lock; /* protect sensor state */
>
> u8 buf[3] ____cacheline_aligned;
> };
> @@ -87,7 +89,7 @@ static int adis16060_read_raw(struct iio_dev *indio_dev,
> switch (mask) {
> case IIO_CHAN_INFO_RAW:
> /* Take the iio_dev status lock */
> - mutex_lock(&indio_dev->mlock);
> + mutex_lock(&st->lock);
> ret = adis16060_spi_write(indio_dev, chan->address);
> if (ret < 0)
> goto out_unlock;
> @@ -96,7 +98,7 @@ static int adis16060_read_raw(struct iio_dev *indio_dev,
> if (ret < 0)
> goto out_unlock;
>
> - mutex_unlock(&indio_dev->mlock);
> + mutex_unlock(&st->lock);
> *val = tval;
> return IIO_VAL_INT;
> case IIO_CHAN_INFO_OFFSET:
> @@ -112,7 +114,7 @@ static int adis16060_read_raw(struct iio_dev *indio_dev,
> return -EINVAL;
>
> out_unlock:
> - mutex_unlock(&indio_dev->mlock);
> + mutex_unlock(&st->lock);
> return ret;
> }
>
> --
> 2.7.4
>
> --
> You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to outreachy-kernel+unsubscribe@googlegroups.com.
> To post to this group, send email to outreachy-kernel@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/20170312131052.GA21816%40singhal-Inspiron-5558.
> For more options, visit https://groups.google.com/d/optout.
next prev parent reply other threads:[~2017-03-12 16:24 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-12 13:10 [PATCH] staging: adis16060_core: Use private driver lock instead of mlock simran singhal
2017-03-12 16:24 ` Alison Schofield [this message]
2017-03-12 18:31 ` [Outreachy kernel] " Alison Schofield
2017-03-13 12:29 ` SIMRAN SINGHAL
2017-03-13 12:05 ` Lars-Peter Clausen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170312162359.GB2873@d830.WORKGROUP \
--to=amsfield22@gmail.com \
--cc=Michael.Hennerich@analog.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=outreachy-kernel@googlegroups.com \
--cc=pmeerw@pmeerw.net \
--cc=singhalsimran0@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox