[PATCH V4] dts/imx6q-b850v3: Use megachips-stdpxxxx-ge-b850v3-fw bridges (LVDS-DP++)

[Peter Senna Tschudin <peter.senna@collabora.com>]

Configures the megachips-stdpxxxx-ge-b850v3-fw bridges on the GE
B850v3 dts file.

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Martyn Welch <martyn.welch@collabora.co.uk>
Cc: Martin Donnelly <martin.donnelly@ge.com>
Cc: Javier Martinez Canillas <javier@dowhile0.org>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Senna Tschudin <peter.senna@collabora.com>
---
Subject was [PATCH V4 4/4] ...
But patches 1, 2, and 3 are already upstream and were not resent.

Changes from V3:
 - Newline fixes
 - Removed 'status = "okay";' from '&mux2_i2c2'
 - Sorted device nodes in order of unit address

Unchanged since V1.
 arch/arm/boot/dts/imx6q-b850v3.dts | 66 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 66 insertions(+)

diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts
index d78514c..ef67b47 100644
--- a/arch/arm/boot/dts/imx6q-b850v3.dts
+++ b/arch/arm/boot/dts/imx6q-b850v3.dts
@@ -72,6 +72,14 @@
 		fsl,data-mapping = "spwg";
 		fsl,data-width = <24>;
 		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&stdp4028_in>;
+			};
+		};
 	};
 };
 
@@ -142,3 +150,61 @@
 		reg = <0x4a>;
 	};
 };
+
+&mux2_i2c2 {
+	clock-frequency = <100000>;
+
+	stdp2690@72 {
+		compatible = "megachips,stdp2690-ge-b850v3-fw";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x72>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				stdp2690_in: endpoint {
+					remote-endpoint = <&stdp4028_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				stdp2690_out: endpoint {
+					/* Connector for external display */
+				};
+			};
+		};
+	};
+
+	stdp4028@73 {
+		compatible = "megachips,stdp4028-ge-b850v3-fw";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x73>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				stdp4028_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				stdp4028_out: endpoint {
+					remote-endpoint = <&stdp2690_in>;
+				};
+			};
+		};
+	};
+};
-- 
2.9.3