From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <linux-kernel-owner@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
        id S1752630AbdDCJUJ (ORCPT <rfc822;w@1wt.eu>);
        Mon, 3 Apr 2017 05:20:09 -0400
Received: from asyring.homeip.net ([37.120.161.147]:45661 "EHLO
        vserver.asyring.homeip.net" rhost-flags-OK-OK-OK-OK)
        by vger.kernel.org with ESMTP id S1751635AbdDCJUG (ORCPT
        <rfc822;linux-kernel@vger.kernel.org>);
        Mon, 3 Apr 2017 05:20:06 -0400
Authentication-Results: mail.asyring.de (amavisd-new);
        dkim=pass (1024-bit key) reason="pass (just generated, assumed good)"
        header.d=asyring.de
From: Alexander Syring <alex@asyring.de>
To: alex@asyring.de
Cc: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>,
        Russell King <linux@armlinux.org.uk>,
        Maxime Ripard <maxime.ripard@free-electrons.com>,
        Chen-Yu Tsai <wens@csie.org>, devicetree@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        linux-sunxi@googlegroups.com
Subject: [PATCH] ARM: sun7i: Cubietruck: enable ACIN und USB power supply subnode
Date: Mon,  3 Apr 2017 11:12:45 +0200
Message-Id: <20170403091245.9766-1-alex@asyring.de>
X-Mailer: git-send-email 2.11.0
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

The Cubietruck has an AXP209 PMIC and can be power-supplied by ACIN via
 the CHG-IN pin or by USB.

This enables the ACIN and the USB power supply subnode in the DT.

Signed-off-by: Alexander Syring <alex@asyring.de>
---

Send again to all relevant people

---
 arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index feb995d29799..98431ef15bc9 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -267,6 +267,10 @@

 #include "axp209.dtsi"

+&ac_power_supply {
+	status = "okay";
+};
+
 &reg_dcdc2 {
 	regulator-always-on;
 	regulator-min-microvolt = <1000000>;
@@ -323,6 +327,10 @@
 	status = "okay";
 };

+&usb_power_supply {
+	status = "okay";
+};
+
 &usbphy {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
@@ -333,3 +341,4 @@
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
 };
+
--
2.11.0