public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon@ti.com>
To: <gregkh@linuxfoundation.org>
Cc: <kishon@ti.com>, <linux-kernel@vger.kernel.org>
Subject: [PATCH 14/32] phy: rcar-gen3-usb2: fix implementation for runtime PM
Date: Mon, 10 Apr 2017 18:48:05 +0530	[thread overview]
Message-ID: <20170410131823.26485-15-kishon@ti.com> (raw)
In-Reply-To: <20170410131823.26485-1-kishon@ti.com>

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

This patch fixes an issue that this driver doesn't take care of the runtime
PM. This code assumed that devm_phy_create() called pm_runtime_enable(dev),
but it misunderstood the dev_phy_create()'s specification.
This driver should call its own pm_runtime_enable() before
dev_phy_create().

Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/phy/phy-rcar-gen3-usb2.c | 31 ++++++++++++++++++++++++-------
 1 file changed, 24 insertions(+), 7 deletions(-)

diff --git a/drivers/phy/phy-rcar-gen3-usb2.c b/drivers/phy/phy-rcar-gen3-usb2.c
index afb4d048d3e9..54c34298a000 100644
--- a/drivers/phy/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/phy-rcar-gen3-usb2.c
@@ -20,6 +20,7 @@
 #include <linux/of_address.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
 #include <linux/workqueue.h>
 
@@ -395,7 +396,7 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
 	struct rcar_gen3_chan *channel;
 	struct phy_provider *provider;
 	struct resource *res;
-	int irq;
+	int irq, ret = 0;
 
 	if (!dev->of_node) {
 		dev_err(dev, "This driver needs device tree\n");
@@ -434,17 +435,24 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
 		}
 	}
 
-	/* devm_phy_create() will call pm_runtime_enable(dev); */
+	/*
+	 * devm_phy_create() will call pm_runtime_enable(&phy->dev);
+	 * And then, phy-core will manage runtime pm for this device.
+	 */
+	pm_runtime_enable(dev);
 	channel->phy = devm_phy_create(dev, NULL, &rcar_gen3_phy_usb2_ops);
 	if (IS_ERR(channel->phy)) {
 		dev_err(dev, "Failed to create USB2 PHY\n");
-		return PTR_ERR(channel->phy);
+		ret = PTR_ERR(channel->phy);
+		goto error;
 	}
 
 	channel->vbus = devm_regulator_get_optional(dev, "vbus");
 	if (IS_ERR(channel->vbus)) {
-		if (PTR_ERR(channel->vbus) == -EPROBE_DEFER)
-			return PTR_ERR(channel->vbus);
+		if (PTR_ERR(channel->vbus) == -EPROBE_DEFER) {
+			ret = PTR_ERR(channel->vbus);
+			goto error;
+		}
 		channel->vbus = NULL;
 	}
 
@@ -454,15 +462,22 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
 	provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
 	if (IS_ERR(provider)) {
 		dev_err(dev, "Failed to register PHY provider\n");
+		ret = PTR_ERR(provider);
+		goto error;
 	} else if (channel->has_otg) {
 		int ret;
 
 		ret = device_create_file(dev, &dev_attr_role);
 		if (ret < 0)
-			return ret;
+			goto error;
 	}
 
-	return PTR_ERR_OR_ZERO(provider);
+	return 0;
+
+error:
+	pm_runtime_disable(dev);
+
+	return ret;
 }
 
 static int rcar_gen3_phy_usb2_remove(struct platform_device *pdev)
@@ -472,6 +487,8 @@ static int rcar_gen3_phy_usb2_remove(struct platform_device *pdev)
 	if (channel->has_otg)
 		device_remove_file(&pdev->dev, &dev_attr_role);
 
+	pm_runtime_disable(&pdev->dev);
+
 	return 0;
 };
 
-- 
2.11.0

  parent reply	other threads:[~2017-04-10 13:19 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-10 13:17 [GIT PULL] phy: for 4.12 Kishon Vijay Abraham I
2017-04-10 13:17 ` [PATCH 01/32] mfd: exynos-lpass: Use common soc/exynos-regs-pmu.h header Kishon Vijay Abraham I
2017-04-11 14:14   ` Lee Jones
2017-04-11 14:20     ` Greg KH
2017-04-11 14:24     ` Kishon Vijay Abraham I
2017-04-11 16:34       ` Lee Jones
2017-04-12  5:19         ` Kishon Vijay Abraham I
2017-04-12  7:57           ` Lee Jones
2017-04-10 13:17 ` [PATCH 02/32] phy: phy-exynos-pcie: make it explicitly non-modular Kishon Vijay Abraham I
2017-04-10 13:17 ` [PATCH 03/32] mfd: exynos-lpass: Use common soc/exynos-regs-pmu.h header Kishon Vijay Abraham I
2017-04-10 13:17 ` [PATCH 04/32] dt: bindings: add pmu0 regs for USB PHYs on Allwinner H3/V3s/A64 Kishon Vijay Abraham I
2017-04-10 13:17 ` [PATCH 05/32] phy: sun4i-usb: change PHYCTL register clearing code Kishon Vijay Abraham I
2017-04-10 13:17 ` [PATCH 06/32] phy: sun4i-usb: add PHYCTL offset for H3 SoC Kishon Vijay Abraham I
2017-04-10 13:17 ` [PATCH 07/32] phy: sun4i-usb: support automatically switch PHY0 route to MUSB/HCI Kishon Vijay Abraham I
2017-04-10 13:17 ` [PATCH 08/32] phy: meson8b-usb2: fix offsets for some of the registers Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 09/32] phy: exynos4: Remove duplicated defines of PHY register defines Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 10/32] phy: exynos5: " Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 11/32] phy: exynos-mipi-video: Use consistent method to address phy registers Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 12/32] phy: exynos: Use one define for enable bit Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 13/32] phy: rockchip-inno-usb2: fix spelling mistake: "connecetd" -> "connected" Kishon Vijay Abraham I
2017-04-10 13:18 ` Kishon Vijay Abraham I [this message]
2017-04-10 13:18 ` [PATCH 15/32] phy: sun4i-usb: enable PHY0 dual route switching for A64 USB PHY Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 16/32] phy: phy-mt65xx-usb3: improve RX detection stable time Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 17/32] phy: phy-mt65xx-usb3: increase LFPS filter threshold Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 18/32] phy: phy-mt65xx-usb3: split SuperSpeed port into two ones Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 19/32] phy: phy-mt65xx-usb3: move clock from phy node into port nodes Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 20/32] phy: phy-mt65xx-usb3: add support for new version phy Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 21/32] phy: phy-mt65xx-usb3: disable 100uA extraction from SS port to HS port Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 22/32] dt-bindings: phy-mt65xx-usb: add support for new version phy Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 23/32] dt-bindings: phy-rockchip-inno-usb2: add assign clock property in usb2-phy node Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 24/32] dt-bindings: add DT bindings for usb2-phy grf Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 25/32] phy: rockchip-inno-usb2: add support of usb2-phy for rk3328 Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 26/32] dt-bindings: phy: Add support for QUSB2 phy Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 27/32] phy: qcom-qusb2: New driver for QUSB2 PHY on Qcom chips Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 28/32] dt-bindings: phy: Add support for QMP phy Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 29/32] phy: qcom-qmp: new qmp phy driver for qcom-chipsets Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 30/32] phy: bcm-ns-usb3: split all writes into reg & val pairs Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 31/32] phy: rockchip-usb: Add vbus regulator support Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 32/32] phy: qcom-qusb2: add NVMEM dependency Kishon Vijay Abraham I
2017-04-10 13:46 ` [GIT PULL] phy: for 4.12 Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170410131823.26485-15-kishon@ti.com \
    --to=kishon@ti.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox