public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon@TI.COM>
To: <gregkh@linuxfoundation.org>
Cc: <kishon@TI.COM>, <linux-kernel@vger.kernel.org>
Subject: [PATCH 25/32] phy: rockchip-inno-usb2: add support of usb2-phy for rk3328
Date: Mon, 10 Apr 2017 18:48:16 +0530	[thread overview]
Message-ID: <20170410131823.26485-26-kishon@ti.com> (raw)
In-Reply-To: <20170410131823.26485-1-kishon@ti.com>

From: Meng Dongyang <daniel.meng@rock-chips.com>

Add usb2-phy config information in the data of match table for
rk3328.

Signed-off-by: Meng Dongyang <daniel.meng@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/phy/phy-rockchip-inno-usb2.c | 44 ++++++++++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/drivers/phy/phy-rockchip-inno-usb2.c b/drivers/phy/phy-rockchip-inno-usb2.c
index 761a921cf720..8efe78a49916 100644
--- a/drivers/phy/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/phy-rockchip-inno-usb2.c
@@ -1138,6 +1138,49 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev)
 	return ret;
 }
 
+static const struct rockchip_usb2phy_cfg rk3328_phy_cfgs[] = {
+	{
+		.reg = 0x100,
+		.num_ports	= 2,
+		.clkout_ctl	= { 0x108, 4, 4, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_OTG] = {
+				.phy_sus	= { 0x0100, 15, 0, 0, 0x1d1 },
+				.bvalid_det_en	= { 0x0110, 2, 2, 0, 1 },
+				.bvalid_det_st	= { 0x0114, 2, 2, 0, 1 },
+				.bvalid_det_clr = { 0x0118, 2, 2, 0, 1 },
+				.ls_det_en	= { 0x0110, 0, 0, 0, 1 },
+				.ls_det_st	= { 0x0114, 0, 0, 0, 1 },
+				.ls_det_clr	= { 0x0118, 0, 0, 0, 1 },
+				.utmi_avalid	= { 0x0120, 10, 10, 0, 1 },
+				.utmi_bvalid	= { 0x0120, 9, 9, 0, 1 },
+				.utmi_ls	= { 0x0120, 5, 4, 0, 1 },
+			},
+			[USB2PHY_PORT_HOST] = {
+				.phy_sus	= { 0x104, 15, 0, 0, 0x1d1 },
+				.ls_det_en	= { 0x110, 1, 1, 0, 1 },
+				.ls_det_st	= { 0x114, 1, 1, 0, 1 },
+				.ls_det_clr	= { 0x118, 1, 1, 0, 1 },
+				.utmi_ls	= { 0x120, 17, 16, 0, 1 },
+				.utmi_hstdet	= { 0x120, 19, 19, 0, 1 }
+			}
+		},
+		.chg_det = {
+			.opmode		= { 0x0100, 3, 0, 5, 1 },
+			.cp_det		= { 0x0120, 24, 24, 0, 1 },
+			.dcp_det	= { 0x0120, 23, 23, 0, 1 },
+			.dp_det		= { 0x0120, 25, 25, 0, 1 },
+			.idm_sink_en	= { 0x0108, 8, 8, 0, 1 },
+			.idp_sink_en	= { 0x0108, 7, 7, 0, 1 },
+			.idp_src_en	= { 0x0108, 9, 9, 0, 1 },
+			.rdm_pdwn_en	= { 0x0108, 10, 10, 0, 1 },
+			.vdm_src_en	= { 0x0108, 12, 12, 0, 1 },
+			.vdp_src_en	= { 0x0108, 11, 11, 0, 1 },
+		},
+	},
+	{ /* sentinel */ }
+};
+
 static const struct rockchip_usb2phy_cfg rk3366_phy_cfgs[] = {
 	{
 		.reg = 0x700,
@@ -1220,6 +1263,7 @@ static const struct rockchip_usb2phy_cfg rk3399_phy_cfgs[] = {
 };
 
 static const struct of_device_id rockchip_usb2phy_dt_match[] = {
+	{ .compatible = "rockchip,rk3328-usb2phy", .data = &rk3328_phy_cfgs },
 	{ .compatible = "rockchip,rk3366-usb2phy", .data = &rk3366_phy_cfgs },
 	{ .compatible = "rockchip,rk3399-usb2phy", .data = &rk3399_phy_cfgs },
 	{}
-- 
2.11.0

  parent reply	other threads:[~2017-04-10 13:22 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-10 13:17 [GIT PULL] phy: for 4.12 Kishon Vijay Abraham I
2017-04-10 13:17 ` [PATCH 01/32] mfd: exynos-lpass: Use common soc/exynos-regs-pmu.h header Kishon Vijay Abraham I
2017-04-11 14:14   ` Lee Jones
2017-04-11 14:20     ` Greg KH
2017-04-11 14:24     ` Kishon Vijay Abraham I
2017-04-11 16:34       ` Lee Jones
2017-04-12  5:19         ` Kishon Vijay Abraham I
2017-04-12  7:57           ` Lee Jones
2017-04-10 13:17 ` [PATCH 02/32] phy: phy-exynos-pcie: make it explicitly non-modular Kishon Vijay Abraham I
2017-04-10 13:17 ` [PATCH 03/32] mfd: exynos-lpass: Use common soc/exynos-regs-pmu.h header Kishon Vijay Abraham I
2017-04-10 13:17 ` [PATCH 04/32] dt: bindings: add pmu0 regs for USB PHYs on Allwinner H3/V3s/A64 Kishon Vijay Abraham I
2017-04-10 13:17 ` [PATCH 05/32] phy: sun4i-usb: change PHYCTL register clearing code Kishon Vijay Abraham I
2017-04-10 13:17 ` [PATCH 06/32] phy: sun4i-usb: add PHYCTL offset for H3 SoC Kishon Vijay Abraham I
2017-04-10 13:17 ` [PATCH 07/32] phy: sun4i-usb: support automatically switch PHY0 route to MUSB/HCI Kishon Vijay Abraham I
2017-04-10 13:17 ` [PATCH 08/32] phy: meson8b-usb2: fix offsets for some of the registers Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 09/32] phy: exynos4: Remove duplicated defines of PHY register defines Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 10/32] phy: exynos5: " Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 11/32] phy: exynos-mipi-video: Use consistent method to address phy registers Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 12/32] phy: exynos: Use one define for enable bit Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 13/32] phy: rockchip-inno-usb2: fix spelling mistake: "connecetd" -> "connected" Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 14/32] phy: rcar-gen3-usb2: fix implementation for runtime PM Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 15/32] phy: sun4i-usb: enable PHY0 dual route switching for A64 USB PHY Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 16/32] phy: phy-mt65xx-usb3: improve RX detection stable time Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 17/32] phy: phy-mt65xx-usb3: increase LFPS filter threshold Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 18/32] phy: phy-mt65xx-usb3: split SuperSpeed port into two ones Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 19/32] phy: phy-mt65xx-usb3: move clock from phy node into port nodes Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 20/32] phy: phy-mt65xx-usb3: add support for new version phy Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 21/32] phy: phy-mt65xx-usb3: disable 100uA extraction from SS port to HS port Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 22/32] dt-bindings: phy-mt65xx-usb: add support for new version phy Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 23/32] dt-bindings: phy-rockchip-inno-usb2: add assign clock property in usb2-phy node Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 24/32] dt-bindings: add DT bindings for usb2-phy grf Kishon Vijay Abraham I
2017-04-10 13:18 ` Kishon Vijay Abraham I [this message]
2017-04-10 13:18 ` [PATCH 26/32] dt-bindings: phy: Add support for QUSB2 phy Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 27/32] phy: qcom-qusb2: New driver for QUSB2 PHY on Qcom chips Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 28/32] dt-bindings: phy: Add support for QMP phy Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 29/32] phy: qcom-qmp: new qmp phy driver for qcom-chipsets Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 30/32] phy: bcm-ns-usb3: split all writes into reg & val pairs Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 31/32] phy: rockchip-usb: Add vbus regulator support Kishon Vijay Abraham I
2017-04-10 13:18 ` [PATCH 32/32] phy: qcom-qusb2: add NVMEM dependency Kishon Vijay Abraham I
2017-04-10 13:46 ` [GIT PULL] phy: for 4.12 Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170410131823.26485-26-kishon@ti.com \
    --to=kishon@ti.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox