[PATCH 1/2] thermal: broadcom: Allow for NSP to use ns-thermal driver

Jon Mason
2017-04-25T20:50:16Z

Change the iProc Kconfig to select THERMAL and THERMAL_OF, which allows
the ns-thermal driver to be selected via menuconfig. Also, change the
ns-thermal driver to work on any iProc based SoC. Finally, tweak the
Kconfig description to mention support for NSP and make the default on
for iProc based platforms.

Signed-off-by: Jon Mason <jon.mason@broadcom.com>
---
arch/arm/mach-bcm/Kconfig | 2 ++
drivers/thermal/broadcom/Kconfig | 9 +++++----
2 files changed, 7 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index a0e66d8..da2bfeb 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -19,6 +19,8 @@ config ARCH_BCM_IPROC
select GPIOLIB
select ARM_AMBA
select PINCTRL
+ select THERMAL
+ select THERMAL_OF
help
This enables support for systems based on Broadcom IPROC architected SoCs.
The IPROC complex contains one or more ARM CPUs along with common
diff --git a/drivers/thermal/broadcom/Kconfig b/drivers/thermal/broadcom/Kconfig
index f0dea8a..26d706c 100644
--- a/drivers/thermal/broadcom/Kconfig
+++ b/drivers/thermal/broadcom/Kconfig
@@ -1,8 +1,9 @@
config BCM_NS_THERMAL
tristate "Northstar thermal driver"
depends on ARCH_BCM_IPROC || COMPILE_TEST
+ default ARCH_BCM_IPROC
help
- Northstar is a family of SoCs that includes e.g. BCM4708, BCM47081,
- BCM4709 and BCM47094. It contains DMU (Device Management Unit) block
- with a thermal sensor that allows checking CPU temperature. This
- driver provides support for it.
+ Support for the Northstar and Northstar Plus family of SoCs (e.g.
+ BCM4708, BCM4709, BCM5301x, BCM95852X, etc). It contains DMU (Device
+ Management Unit) block with a thermal sensor that allows checking CPU
+ temperature.
--
2.7.4