Re: [PATCH] usb-musb: keep VBUS on when device is disconnected

[Bin Liu <b-liu@ti.com>]

On Thu, May 11, 2017 at 02:10:05PM -0500, Bin Liu wrote:
[...]
> > > > The otg state machine implementation in the musb drivers are kind of strange.
> > > > OTG_STATE_A_WAIT_BCON suppose to be a steady state when no usb device is
> > > > attached, but the musb drivers use it as a transient state to handle error
> > > > cases, such as overcurrent ot HNP timeout, which is done in the 'case
> > > > OTG_STATE_A_WAIT_BCON' branch in otg_timer() (or dsps_check_status() for dsps
> > > > glue).
> > > > 
> > > > Then later when 2f3fd2c5bde1 adds
> > > > 
> > > > -       /* Poll for ID change in OTG port mode */
> > > > -       if (musb->xceiv->otg->state == OTG_STATE_B_IDLE &&
> > > > -                       musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
> > > > +       /* Poll for ID change and connect */
> > > > +       switch (musb->xceiv->otg->state) {
> > > > +       case OTG_STATE_B_IDLE:
> > > > +       case OTG_STATE_A_WAIT_BCON:
> > > >                 mod_timer(&glue->timer, jiffies +
> > > >                                 msecs_to_jiffies(wrp->poll_timeout));
> > > > +               break;
> > > > 
> > > > which causes dsps_check_status (or otg_timer()) got called for a normal
> > > > condition with OTG_STATE_A_WAIT_BCON, then turns off VBUS...
> > > > 
> > > > Will try to see how to solve this...
> > > 
> > > Maybe we just need to add back the earlier check for non-OTG devices
> > > "musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE" into case
> > > OTG_STATE_A_WAIT_BCON?
> > 
> > Not sure if it will work. The check is to kick out device-only mode.
> > DUAL_ROLE means both OTG and host-only.
> > 
> > > 
> > > Not sure if am335x configured with host port ever idle that way,
> > > but maybe VBUS can be kept on with musb idle.
> > 
> > Just tried to remove 
> > 
> > +       case OTG_STATE_A_WAIT_BCON:
> > 
> > for the polling, but the port stops detecting device attach, musb
> > power/devctl registers are good, trying to see why... maybe related to
> > PM state?
> 
> usb_otg_hs is idle, so not able to detect attach. So need to get the
> timer rolling in here to make it detect working.
> Maybe need to add a flag in dsps_check_status() to not turn off vbus in
> this case? Really don't like the idea...

Tony,

I am not sure I gave out the picture clearly.

Before added the runtime PM support, in host mode (devctl=0x19) the
otg_timer is stopped, the controller is ready to detect attach.

Later when added the runtime PM support, usb_otg_hs hwmod becomes idle
when a device is detached, so the otg_timer is needed to keep hwmod
enable/idle periodically to detect attach, which triggers the issue
because otg_timer() turns off vbus unconditionally when otg state is
OTG_STATE_A_WAIT_BCON.

Regards,
-Bin.