Re: [PATCH] Input: elantech - force a module ignore ABS mode

[Dmitry Torokhov <dmitry.torokhov@gmail.com>]

On Mon, Dec 12, 2016 at 03:11:03PM +0800, KT Liao wrote:
> One Elan sample which sample version is 0x74 and hw_version is 0x04 has a bug in abs mode, so let it run in default mode
> Signed-off-by: KT Liao <kt.liao@emc.com.tw>

Applied, thank you.

> ---
>  drivers/input/mouse/elantech.c | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
> index db7d1d6..f1c2d10 100644
> --- a/drivers/input/mouse/elantech.c
> +++ b/drivers/input/mouse/elantech.c
> @@ -1687,6 +1687,13 @@ int elantech_init(struct psmouse *psmouse)
>  			     etd->samples[0], etd->samples[1], etd->samples[2]);
>  	}
>  
> +	if (etd->samples[1] == 0x74 && etd->hw_version == 0x03) {
> +		/*This module has a bug in absolute mode, let it be defualt mode  */
> +		psmouse_info(psmouse,
> +			     "This module only active in default mode\n");
> +		goto init_fail;
> +	}
> +
>  	if (elantech_set_absolute_mode(psmouse)) {
>  		psmouse_err(psmouse,
>  			    "failed to put touchpad into absolute mode.\n");
> -- 
> 2.7.4
> 

-- 
Dmitry