Re: [PATCH 0/3] pinctrl: Add support for Intel Cannon Lake PCH

Andy Shevchenko
2017-06-05T15:20:59Z

On Mon, Jun 5, 2017 at 3:56 PM, Mika Westerberg
<mika.westerberg@linux.intel.com> wrote:
> Hi,
>
> This series adds support for the pinctrl and GPIO hardware found on the
> next generation Intel Cannon Lake CPUs. We also update the Intel core
> pinctrl driver with a concept of hardware pad groups that are needed by the
> new driver and make it possible to specify mode per pin instead of the
> whole group.
>

One comment to be considered, otherwise

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

> Mika Westerberg (3):
> pinctrl: intel: Add support for variable size pad groups
> pinctrl: intel: Make it possible to specify mode per pin in a group
> pinctrl: intel: Add Intel Cannon Lake PCH pin controller support
>
> drivers/pinctrl/intel/Kconfig | 8 +
> drivers/pinctrl/intel/Makefile | 1 +
> drivers/pinctrl/intel/pinctrl-cannonlake.c | 442 +++++++++++++++++++++++++++
> drivers/pinctrl/intel/pinctrl-intel.c | 195 ++++++++----
> drivers/pinctrl/intel/pinctrl-intel.h | 64 +++-
> drivers/pinctrl/intel/pinctrl-sunrisepoint.c | 1 +
> 6 files changed, 647 insertions(+), 64 deletions(-)
> create mode 100644 drivers/pinctrl/intel/pinctrl-cannonlake.c
>
> --
> 2.11.0
>

--
With Best Regards,
Andy Shevchenko