From: Kishon Vijay Abraham I <kishon@ti.com>
To: Tony Lindgren <tony@atomide.com>,
Rob Herring <robh+dt@kernel.org>, <nsekhar@ti.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>,
Russell King <linux@armlinux.org.uk>,
<linux-omap@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <linux-mmc@vger.kernel.org>,
<kishon@ti.com>, Ravikumar Kattekola <rk@ti.com>
Subject: [PATCH v2 1/8] ARM: dts: dra72-evm-common: Correct vmmc-supply for mmc2
Date: Wed, 7 Jun 2017 15:07:42 +0530 [thread overview]
Message-ID: <20170607093749.15656-2-kishon@ti.com> (raw)
In-Reply-To: <20170607093749.15656-1-kishon@ti.com>
On dra72/dra71 evms, mmc2 vdd/ios are connected to a common 1.8V supply
not 3.3V. Also the regulator that supplies 1.8V is different on dra71-evm
so move the supply property from common dtsi to evm specific dts files.
Fixes: a4240d3af677 ("ARM: dts: Add support for dra72-evm rev C (SR2.0)")
Signed-off-by: Ravikumar Kattekola <rk@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
arch/arm/boot/dts/dra71-evm.dts | 14 ++++++++++++++
arch/arm/boot/dts/dra72-evm-common.dtsi | 2 --
arch/arm/boot/dts/dra72-evm-revc.dts | 14 ++++++++++++++
arch/arm/boot/dts/dra72-evm.dts | 14 ++++++++++++++
4 files changed, 42 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts
index 4d57a55473af..c7a56b6263a6 100644
--- a/arch/arm/boot/dts/dra71-evm.dts
+++ b/arch/arm/boot/dts/dra71-evm.dts
@@ -32,6 +32,16 @@
3000000 0x1>;
};
+ evm_1v8_sw: fixedregulator-evm_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "evm_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&lp8732_buck0_reg>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
poweroff: gpio-poweroff {
compatible = "gpio-poweroff";
gpios = <&gpio7 30 GPIO_ACTIVE_HIGH>;
@@ -165,6 +175,10 @@
vmmc_aux-supply = <&vpo_sd_1v8_3v3>;
};
+&mmc2 {
+ vmmc-supply = <&evm_1v8_sw>;
+};
+
&mac {
mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>,
<&pcf_hdmi 9 GPIO_ACTIVE_LOW>, /* P11 */
diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
index ad24544adf0f..d97370217eff 100644
--- a/arch/arm/boot/dts/dra72-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
@@ -418,8 +418,6 @@
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins_default>;
-
- vmmc-supply = <&evm_3v3_sw>;
bus-width = <8>;
ti,non-removable;
max-frequency = <192000000>;
diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts
index 3ecac56bf504..47dcd527ec58 100644
--- a/arch/arm/boot/dts/dra72-evm-revc.dts
+++ b/arch/arm/boot/dts/dra72-evm-revc.dts
@@ -15,6 +15,16 @@
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */
};
+
+ evm_1v8_sw: fixedregulator-evm_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "evm_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&smps4_reg>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
};
&i2c1 {
@@ -82,3 +92,7 @@
interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
};
};
+
+&mmc2 {
+ vmmc-supply = <&evm_1v8_sw>;
+};
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index cd9c4ff12654..adbcc570eba9 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -13,6 +13,16 @@
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x40000000>; /* 1024 MB */
};
+
+ evm_1v8_sw: fixedregulator-evm_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "evm_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&smps4_reg>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
};
&i2c1 {
@@ -43,3 +53,7 @@
phy_id = <&davinci_mdio>, <3>;
phy-mode = "rgmii";
};
+
+&mmc2 {
+ vmmc-supply = <&evm_1v8_sw>;
+};
--
2.11.0
next prev parent reply other threads:[~2017-06-07 9:40 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-07 9:37 [PATCH v2 0/8] omap*: Fixes/Cleanups for MMC devicetree node Kishon Vijay Abraham I
2017-06-07 9:37 ` Kishon Vijay Abraham I [this message]
2017-06-07 9:37 ` [PATCH v2 2/8] ARM: dts: dra72-evm: Add vqmmc supply to mmc1 Kishon Vijay Abraham I
2017-06-07 9:37 ` [PATCH v2 3/8] ARM: dts: dra72-evm-revc: " Kishon Vijay Abraham I
2017-06-07 9:37 ` [PATCH v2 4/8] ARM: dts: am57xx-beagle-x15-revb1: Fix supply name used for MMC1 IO lines Kishon Vijay Abraham I
2017-06-07 9:37 ` [PATCH v2 5/8] ARM: dts: dra7-evm: Correct the vmmc-supply for mmc2 Kishon Vijay Abraham I
2017-06-07 9:37 ` [PATCH v2 6/8] ARM: dts: dra7: Add "max-frequency" property to MMC dt nodes Kishon Vijay Abraham I
2017-06-07 9:37 ` [PATCH v2 7/8] ARM: OMAP2+: Add pdata-quirks for MMC/SD on DRA74x EVM Kishon Vijay Abraham I
2017-06-07 9:37 ` [PATCH v2 8/8] ARM: dts: omap*: Replace deprecated "vmmc_aux" with "vqmmc" Kishon Vijay Abraham I
2017-06-09 12:08 ` [PATCH v3] " Kishon Vijay Abraham I
2017-06-08 7:20 ` [PATCH v2 0/8] omap*: Fixes/Cleanups for MMC devicetree node Ulf Hansson
2017-06-08 8:46 ` Tony Lindgren
2017-06-09 12:21 ` Kishon Vijay Abraham I
2017-06-09 8:05 ` Kishon Vijay Abraham I
2017-06-09 10:41 ` Ulf Hansson
2017-08-03 11:18 ` Kishon Vijay Abraham I
2017-08-07 6:48 ` Tony Lindgren
2017-08-10 16:13 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170607093749.15656-2-kishon@ti.com \
--to=kishon@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=nsekhar@ti.com \
--cc=rk@ti.com \
--cc=robh+dt@kernel.org \
--cc=tony@atomide.com \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox