From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Sachin Prabhu <sprabhu@redhat.com>,
Pavel Shilovsky <pshilov@microsoft.com>,
Steve French <smfrench@gmail.com>
Subject: [PATCH 3.18 03/32] Call echo service immediately after socket reconnect
Date: Mon, 19 Jun 2017 23:20:47 +0800 [thread overview]
Message-ID: <20170619152035.905190102@linuxfoundation.org> (raw)
In-Reply-To: <20170619152035.750974520@linuxfoundation.org>
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sachin Prabhu <sprabhu@redhat.com>
commit b8c600120fc87d53642476f48c8055b38d6e14c7 upstream.
Commit 4fcd1813e640 ("Fix reconnect to not defer smb3 session reconnect
long after socket reconnect") changes the behaviour of the SMB2 echo
service and causes it to renegotiate after a socket reconnect. However
under default settings, the echo service could take up to 120 seconds to
be scheduled.
The patch forces the echo service to be called immediately resulting a
negotiate call being made immediately on reconnect.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/cifs/connect.c | 24 ++++++++++++++++++------
1 file changed, 18 insertions(+), 6 deletions(-)
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -400,6 +400,9 @@ cifs_reconnect(struct TCP_Server_Info *s
mutex_unlock(&server->srv_mutex);
} while (server->tcpStatus == CifsNeedReconnect);
+ if (server->tcpStatus == CifsNeedNegotiate)
+ mod_delayed_work(cifsiod_wq, &server->echo, 0);
+
return rc;
}
@@ -409,18 +412,27 @@ cifs_echo_request(struct work_struct *wo
int rc;
struct TCP_Server_Info *server = container_of(work,
struct TCP_Server_Info, echo.work);
+ unsigned long echo_interval;
+
+ /*
+ * If we need to renegotiate, set echo interval to zero to
+ * immediately call echo service where we can renegotiate.
+ */
+ if (server->tcpStatus == CifsNeedNegotiate)
+ echo_interval = 0;
+ else
+ echo_interval = SMB_ECHO_INTERVAL;
/*
- * We cannot send an echo if it is disabled or until the
- * NEGOTIATE_PROTOCOL request is done, which is indicated by
- * server->ops->need_neg() == true. Also, no need to ping if
- * we got a response recently.
+ * We cannot send an echo if it is disabled.
+ * Also, no need to ping if we got a response recently.
*/
if (server->tcpStatus == CifsNeedReconnect ||
- server->tcpStatus == CifsExiting || server->tcpStatus == CifsNew ||
+ server->tcpStatus == CifsExiting ||
+ server->tcpStatus == CifsNew ||
(server->ops->can_echo && !server->ops->can_echo(server)) ||
- time_before(jiffies, server->lstrp + SMB_ECHO_INTERVAL - HZ))
+ time_before(jiffies, server->lstrp + echo_interval - HZ))
goto requeue_echo;
rc = server->ops->echo ? server->ops->echo(server) : -ENOSYS;
next prev parent reply other threads:[~2017-06-19 15:34 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-19 15:20 [PATCH 3.18 00/32] 3.18.58-stable review Greg Kroah-Hartman
2017-06-19 15:20 ` [PATCH 3.18 01/32] s390/vmem: fix identity mapping Greg Kroah-Hartman
2017-06-19 15:20 ` [PATCH 3.18 02/32] partitions/msdos: FreeBSD UFS2 file systems are not recognized Greg Kroah-Hartman
2017-06-19 15:20 ` Greg Kroah-Hartman [this message]
2017-06-19 15:20 ` [PATCH 3.18 04/32] net: xilinx_emaclite: fix freezes due to unordered I/O Greg Kroah-Hartman
2017-06-19 15:20 ` [PATCH 3.18 05/32] net: xilinx_emaclite: fix receive buffer overflow Greg Kroah-Hartman
2017-06-19 15:20 ` [PATCH 3.18 06/32] ipv6: Handle IPv4-mapped src to in6addr_any dst Greg Kroah-Hartman
2017-06-19 15:20 ` [PATCH 3.18 07/32] ipv6: Inhibit IPv4-mapped src address on the wire Greg Kroah-Hartman
2017-06-19 15:20 ` [PATCH 3.18 08/32] log2: make order_base_2() behave correctly on const input value zero Greg Kroah-Hartman
2017-06-19 15:20 ` [PATCH 3.18 09/32] sparc64: make string buffers large enough Greg Kroah-Hartman
2017-06-19 15:20 ` [PATCH 3.18 10/32] configfs: Fix race between create_link and configfs_rmdir Greg Kroah-Hartman
2017-06-19 15:20 ` [PATCH 3.18 11/32] can: gs_usb: fix memory leak in gs_cmd_reset() Greg Kroah-Hartman
2017-06-19 15:20 ` [PATCH 3.18 13/32] [media] vb2: Fix an off by one error in vb2_plane_vaddr Greg Kroah-Hartman
2017-06-19 15:20 ` [PATCH 3.18 14/32] mac80211: dont look at the PM bit of BAR frames Greg Kroah-Hartman
2017-06-19 15:21 ` [PATCH 3.18 16/32] x86/mm/32: Set the __vmalloc_start_set flag in initmem_init() Greg Kroah-Hartman
2017-06-19 15:21 ` [PATCH 3.18 17/32] mfd: omap-usb-tll: Fix inverted bit use for USB TLL mode Greg Kroah-Hartman
2017-06-19 15:21 ` [PATCH 3.18 18/32] staging: rtl8188eu: prevent an underflow in rtw_check_beacon_data() Greg Kroah-Hartman
2017-06-19 15:21 ` [PATCH 3.18 19/32] iio: proximity: as3935: recalibrate RCO after resume Greg Kroah-Hartman
2017-06-19 15:21 ` [PATCH 3.18 20/32] USB: hub: fix SS max number of ports Greg Kroah-Hartman
2017-06-19 15:21 ` [PATCH 3.18 21/32] usb: core: fix potential memory leak in error path during hcd creation Greg Kroah-Hartman
2017-06-19 15:21 ` [PATCH 3.18 22/32] [media] pvrusb2: reduce stack usage pvr2_eeprom_analyze() Greg Kroah-Hartman
2017-06-19 15:21 ` [PATCH 3.18 23/32] USB: gadget: dummy_hcd: fix hub-descriptor removable fields Greg Kroah-Hartman
2017-06-19 15:21 ` [PATCH 3.18 24/32] usb: r8a66597-hcd: select a different endpoint on timeout Greg Kroah-Hartman
2017-06-19 15:21 ` [PATCH 3.18 25/32] usb: r8a66597-hcd: decrease timeout Greg Kroah-Hartman
2017-06-19 15:21 ` [PATCH 3.18 26/32] drivers/misc/c2port/c2port-duramar2150.c: checking for NULL instead of IS_ERR() Greg Kroah-Hartman
2017-06-19 15:21 ` [PATCH 3.18 27/32] usb: xhci: ASMedia ASM1042A chipset need shorts TX quirk Greg Kroah-Hartman
2017-06-19 15:21 ` [PATCH 3.18 28/32] mm/memory-failure.c: use compound_head() flags for huge pages Greg Kroah-Hartman
2017-06-19 15:21 ` [PATCH 3.18 29/32] swap: cond_resched in swap_cgroup_prepare() Greg Kroah-Hartman
2017-06-19 15:21 ` [PATCH 3.18 30/32] genirq: Release resources in __setup_irq() error path Greg Kroah-Hartman
2017-06-19 15:21 ` [PATCH 3.18 31/32] alarmtimer: Rate limit periodic intervals Greg Kroah-Hartman
2017-06-19 15:21 ` [PATCH 3.18 32/32] mm: larger stack guard gap, between vmas Greg Kroah-Hartman
2017-06-21 5:49 ` Hugh Dickins
2017-06-21 5:59 ` Willy Tarreau
2017-06-21 6:10 ` Hugh Dickins
2017-06-21 7:24 ` Willy Tarreau
2017-06-24 15:04 ` Greg Kroah-Hartman
2017-06-19 22:47 ` [PATCH 3.18 00/32] 3.18.58-stable review Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170619152035.905190102@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pshilov@microsoft.com \
--cc=smfrench@gmail.com \
--cc=sprabhu@redhat.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox