From: Vitaly Kuznetsov <vkuznets@redhat.com>
To: x86@kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@redhat.com>, "H. Peter Anvin" <hpa@zytor.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH RFC] x86/smpboot: Unbreak CPU0 hotplug
Date: Mon, 26 Jun 2017 18:36:35 +0200 [thread overview]
Message-ID: <20170626163635.28808-1-vkuznets@redhat.com> (raw)
A hang on CPU0 onlining after a preceding offlining is observed. Trace
shows that CPU0 is stuck in check_tsc_sync_target() waiting for source
CPU to run check_tsc_sync_source() but this never happens. Source CPU,
in its turn, is stuck on synchronize_sched() which is called from
native_cpu_up() -> do_boot_cpu() -> unregister_nmi_handler().
Fix the issue by moving unregister_nmi_handler() from do_boot_cpu() to
native_cpu_up() after cpu onlining is done.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
---
RFC part: I tested the fix on KVM and Xen guests and it works just fine
but CPU0 hotplug is not something I'm really familiar with, I may be
missing some important details. I also skipped code archeology to figure
out when things got broken.
---
arch/x86/kernel/smpboot.c | 30 +++++++++++++++++-------------
1 file changed, 17 insertions(+), 13 deletions(-)
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index f04479a..00349b6 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -971,7 +971,8 @@ void common_cpu_up(unsigned int cpu, struct task_struct *idle)
* Returns zero if CPU booted OK, else error code from
* ->wakeup_secondary_cpu.
*/
-static int do_boot_cpu(int apicid, int cpu, struct task_struct *idle)
+static int do_boot_cpu(int apicid, int cpu, struct task_struct *idle,
+ int *cpu0_nmi_registered)
{
volatile u32 *trampoline_status =
(volatile u32 *) __va(real_mode_header->trampoline_status);
@@ -979,7 +980,6 @@ static int do_boot_cpu(int apicid, int cpu, struct task_struct *idle)
unsigned long start_ip = real_mode_header->trampoline_start;
unsigned long boot_error = 0;
- int cpu0_nmi_registered = 0;
unsigned long timeout;
idle->thread.sp = (unsigned long)task_pt_regs(idle);
@@ -1035,7 +1035,7 @@ static int do_boot_cpu(int apicid, int cpu, struct task_struct *idle)
boot_error = apic->wakeup_secondary_cpu(apicid, start_ip);
else
boot_error = wakeup_cpu_via_init_nmi(cpu, start_ip, apicid,
- &cpu0_nmi_registered);
+ cpu0_nmi_registered);
if (!boot_error) {
/*
@@ -1080,12 +1080,6 @@ static int do_boot_cpu(int apicid, int cpu, struct task_struct *idle)
*/
smpboot_restore_warm_reset_vector();
}
- /*
- * Clean up the nmi handler. Do this after the callin and callout sync
- * to avoid impact of possible long unregister time.
- */
- if (cpu0_nmi_registered)
- unregister_nmi_handler(NMI_LOCAL, "wake_cpu0");
return boot_error;
}
@@ -1093,8 +1087,9 @@ static int do_boot_cpu(int apicid, int cpu, struct task_struct *idle)
int native_cpu_up(unsigned int cpu, struct task_struct *tidle)
{
int apicid = apic->cpu_present_to_apicid(cpu);
+ int cpu0_nmi_registered = 0;
unsigned long flags;
- int err;
+ int err, ret = 0;
WARN_ON(irqs_disabled());
@@ -1131,10 +1126,11 @@ int native_cpu_up(unsigned int cpu, struct task_struct *tidle)
common_cpu_up(cpu, tidle);
- err = do_boot_cpu(apicid, cpu, tidle);
+ err = do_boot_cpu(apicid, cpu, tidle, &cpu0_nmi_registered);
if (err) {
pr_err("do_boot_cpu failed(%d) to wakeup CPU#%u\n", err, cpu);
- return -EIO;
+ ret = -EIO;
+ goto unreg_nmi;
}
/*
@@ -1150,7 +1146,15 @@ int native_cpu_up(unsigned int cpu, struct task_struct *tidle)
touch_nmi_watchdog();
}
- return 0;
+unreg_nmi:
+ /*
+ * Clean up the nmi handler. Do this after the callin and callout sync
+ * to avoid impact of possible long unregister time.
+ */
+ if (cpu0_nmi_registered)
+ unregister_nmi_handler(NMI_LOCAL, "wake_cpu0");
+
+ return ret;
}
/**
--
2.9.4
next reply other threads:[~2017-06-26 16:36 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-26 16:36 Vitaly Kuznetsov [this message]
2017-06-30 8:25 ` [PATCH RFC] x86/smpboot: Unbreak CPU0 hotplug Vitaly Kuznetsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170626163635.28808-1-vkuznets@redhat.com \
--to=vkuznets@redhat.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox