[PATCH NET V7 0/2] Add loopback support in phy_driver and hns ethtool fix

[PATCH NET V7 0/2] Add loopback support in phy_driver and hns ethtool fix

[Lin Yun Sheng]

This Patch Set add set_loopback in phy_driver and use it to setup loopback
when doing ethtool phy self_test.

Patch V7:
	1. Add comment why resume the phy in hns_nic_config_phy_loopback.
	2. Fix a typo error in patch description.

Patch V6:
	Fix Or'ing error code in __lb_setup.

Patch V5:
	Removing non loopback related code change.

Patch V4:
	1. Remove c45 checking
	2. Add -ENOTSUPP when function pointer is null,
	   take mutex in phy_loopback.

Patch V3:
	Calling phy_loopback enable and disable in pair in hns mac driver.

Patch V2:
	1. Add phy_loopback in phy_device.c.
	2. Do error checking and do the read and write once in
	   genphy_loopback.
	3. Remove gen10g_loopback in phy_device.c.

Patch V1:
	Initial Submit

Lin Yun Sheng (2):
  net: phy: Add phy loopback support in net phy framework
  net: hns: Use phy_driver to setup Phy loopback

 drivers/net/ethernet/hisilicon/hns/hnae.h        |   1 +
 drivers/net/ethernet/hisilicon/hns/hns_ethtool.c | 105 ++++++++---------------
 drivers/net/phy/marvell.c                        |   1 +
 drivers/net/phy/phy_device.c                     |  51 +++++++++++
 include/linux/phy.h                              |   5 ++
 5 files changed, 92 insertions(+), 71 deletions(-)

-- 
1.9.1

[PATCH NET V7 1/2] net: phy: Add phy loopback support in net phy framework

[Lin Yun Sheng]

This patch add set_loopback in phy_driver, which is used by MAC
driver to enable or disable phy loopback. it also add a generic
genphy_loopback function, which use BMCR loopback bit to enable
or disable loopback.

Signed-off-by: Lin Yun Sheng <linyunsheng@huawei.com>
---
 drivers/net/phy/marvell.c    |  1 +
 drivers/net/phy/phy_device.c | 51 ++++++++++++++++++++++++++++++++++++++++++++
 include/linux/phy.h          |  5 +++++
 3 files changed, 57 insertions(+)

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 57297ba..01a1586 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -2094,6 +2094,7 @@ static int m88e1510_probe(struct phy_device *phydev)
 		.get_sset_count = marvell_get_sset_count,
 		.get_strings = marvell_get_strings,
 		.get_stats = marvell_get_stats,
+		.set_loopback = genphy_loopback,
 	},
 	{
 		.phy_id = MARVELL_PHY_ID_88E1540,
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 1219eea..1e08d62 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1123,6 +1123,39 @@ int phy_resume(struct phy_device *phydev)
 }
 EXPORT_SYMBOL(phy_resume);
 
+int phy_loopback(struct phy_device *phydev, bool enable)
+{
+	struct phy_driver *phydrv = to_phy_driver(phydev->mdio.dev.driver);
+	int ret = 0;
+
+	mutex_lock(&phydev->lock);
+
+	if (enable && phydev->loopback_enabled) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	if (!enable && !phydev->loopback_enabled) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (phydev->drv && phydrv->set_loopback)
+		ret = phydrv->set_loopback(phydev, enable);
+	else
+		ret = -EOPNOTSUPP;
+
+	if (ret)
+		goto out;
+
+	phydev->loopback_enabled = enable;
+
+out:
+	mutex_unlock(&phydev->lock);
+	return ret;
+}
+EXPORT_SYMBOL(phy_loopback);
+
 /* Generic PHY support and helper functions */
 
 /**
@@ -1628,6 +1661,23 @@ static int gen10g_resume(struct phy_device *phydev)
 	return 0;
 }
 
+int genphy_loopback(struct phy_device *phydev, bool enable)
+{
+	int value;
+
+	value = phy_read(phydev, MII_BMCR);
+	if (value < 0)
+		return value;
+
+	if (enable)
+		value |= BMCR_LOOPBACK;
+	else
+		value &= ~BMCR_LOOPBACK;
+
+	return phy_write(phydev, MII_BMCR, value);
+}
+EXPORT_SYMBOL(genphy_loopback);
+
 static int __set_phy_supported(struct phy_device *phydev, u32 max_speed)
 {
 	/* The default values for phydev->supported are provided by the PHY
@@ -1874,6 +1924,7 @@ void phy_drivers_unregister(struct phy_driver *drv, int n)
 	.read_status	= genphy_read_status,
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
+	.set_loopback	= genphy_loopback,
 }, {
 	.phy_id         = 0xffffffff,
 	.phy_id_mask    = 0xffffffff,
diff --git a/include/linux/phy.h b/include/linux/phy.h
index e76e4ad..49c903dc 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -364,6 +364,7 @@ struct phy_c45_device_ids {
  * is_pseudo_fixed_link: Set to true if this phy is an Ethernet switch, etc.
  * has_fixups: Set to true if this phy has fixups/quirks.
  * suspended: Set to true if this phy has been suspended successfully.
+ * loopback_enabled: Set true if this phy has been loopbacked successfully.
  * state: state of the PHY for management purposes
  * dev_flags: Device-specific flags used by the PHY driver.
  * link_timeout: The number of timer firings to wait before the
@@ -400,6 +401,7 @@ struct phy_device {
 	bool is_pseudo_fixed_link;
 	bool has_fixups;
 	bool suspended;
+	bool loopback_enabled;
 
 	enum phy_state state;
 
@@ -639,6 +641,7 @@ struct phy_driver {
 	int (*set_tunable)(struct phy_device *dev,
 			    struct ethtool_tunable *tuna,
 			    const void *data);
+	int (*set_loopback)(struct phy_device *dev, bool enable);
 };
 #define to_phy_driver(d) container_of(to_mdio_common_driver(d),		\
 				      struct phy_driver, mdiodrv)
@@ -774,6 +777,7 @@ static inline void phy_device_free(struct phy_device *phydev) { }
 int phy_init_hw(struct phy_device *phydev);
 int phy_suspend(struct phy_device *phydev);
 int phy_resume(struct phy_device *phydev);
+int phy_loopback(struct phy_device *phydev, bool enable);
 struct phy_device *phy_attach(struct net_device *dev, const char *bus_id,
 			      phy_interface_t interface);
 struct phy_device *phy_find_first(struct mii_bus *bus);
@@ -825,6 +829,7 @@ void phy_attached_print(struct phy_device *phydev, const char *fmt, ...)
 int genphy_read_status(struct phy_device *phydev);
 int genphy_suspend(struct phy_device *phydev);
 int genphy_resume(struct phy_device *phydev);
+int genphy_loopback(struct phy_device *phydev, bool enable);
 int genphy_soft_reset(struct phy_device *phydev);
 static inline int genphy_no_soft_reset(struct phy_device *phydev)
 {
-- 
1.9.1

Re: [PATCH NET V7 1/2] net: phy: Add phy loopback support in net phy framework

[Andrew Lunn]

On Wed, Jun 28, 2017 at 05:13:10PM +0800, Lin Yun Sheng wrote:
> This patch add set_loopback in phy_driver, which is used by MAC
> driver to enable or disable phy loopback. it also add a generic
> genphy_loopback function, which use BMCR loopback bit to enable
> or disable loopback.
> 
> Signed-off-by: Lin Yun Sheng <linyunsheng@huawei.com>

Hi Lin

It is normal to include my

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

when resubmitting a patch. The only time you drop such tags is when
you make a big change.

    Andrew

Re: [PATCH NET V7 1/2] net: phy: Add phy loopback support in net phy framework

[Yunsheng Lin]

Hi, Andrew

On 2017/6/28 21:27, Andrew Lunn wrote:
> On Wed, Jun 28, 2017 at 05:13:10PM +0800, Lin Yun Sheng wrote:
>> This patch add set_loopback in phy_driver, which is used by MAC
>> driver to enable or disable phy loopback. it also add a generic
>> genphy_loopback function, which use BMCR loopback bit to enable
>> or disable loopback.
>>
>> Signed-off-by: Lin Yun Sheng <linyunsheng@huawei.com>
> 
> Hi Lin
> 
> It is normal to include my
> 
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
> 
> when resubmitting a patch. The only time you drop such tags is when
> you make a big change.
Will do next time, thanks for reviewing.

Best Regards
Yunsheng Lin

[PATCH NET V7 2/2] net: hns: Use phy_driver to setup Phy loopback

[Lin Yun Sheng]

Use function set_loopback in phy_driver to setup phy loopback
when doing ethtool self test.

Signed-off-by: Lin Yun Sheng <linyunsheng@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns/hnae.h        |   1 +
 drivers/net/ethernet/hisilicon/hns/hns_ethtool.c | 105 ++++++++---------------
 2 files changed, 35 insertions(+), 71 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hnae.h b/drivers/net/ethernet/hisilicon/hns/hnae.h
index 04211ac..7ba653a 100644
--- a/drivers/net/ethernet/hisilicon/hns/hnae.h
+++ b/drivers/net/ethernet/hisilicon/hns/hnae.h
@@ -360,6 +360,7 @@ enum hnae_loop {
 	MAC_INTERNALLOOP_MAC = 0,
 	MAC_INTERNALLOOP_SERDES,
 	MAC_INTERNALLOOP_PHY,
+	MAC_LOOP_PHY_NONE,
 	MAC_LOOP_NONE,
 };
 
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
index e95795b..92865cf 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
@@ -259,67 +259,27 @@ static int hns_nic_set_link_ksettings(struct net_device *net_dev,
 
 static int hns_nic_config_phy_loopback(struct phy_device *phy_dev, u8 en)
 {
-#define COPPER_CONTROL_REG 0
-#define PHY_POWER_DOWN BIT(11)
-#define PHY_LOOP_BACK BIT(14)
-	u16 val = 0;
-
-	if (phy_dev->is_c45) /* c45 branch adding for XGE PHY */
-		return -ENOTSUPP;
+	int err;
 
 	if (en) {
-		/* speed : 1000M */
-		phy_write(phy_dev, HNS_PHY_PAGE_REG, 2);
-		phy_write(phy_dev, 21, 0x1046);
-
-		phy_write(phy_dev, HNS_PHY_PAGE_REG, 0);
-		/* Force Master */
-		phy_write(phy_dev, 9, 0x1F00);
-
-		/* Soft-reset */
-		phy_write(phy_dev, 0, 0x9140);
-		/* If autoneg disabled,two soft-reset operations */
-		phy_write(phy_dev, 0, 0x9140);
-
-		phy_write(phy_dev, HNS_PHY_PAGE_REG, 0xFA);
-
-		/* Default is 0x0400 */
-		phy_write(phy_dev, 1, 0x418);
-
-		/* Force 1000M Link, Default is 0x0200 */
-		phy_write(phy_dev, 7, 0x20C);
-
-		/* Powerup Fiber */
-		phy_write(phy_dev, HNS_PHY_PAGE_REG, 1);
-		val = phy_read(phy_dev, COPPER_CONTROL_REG);
-		val &= ~PHY_POWER_DOWN;
-		phy_write(phy_dev, COPPER_CONTROL_REG, val);
-
-		/* Enable Phy Loopback */
-		phy_write(phy_dev, HNS_PHY_PAGE_REG, 0);
-		val = phy_read(phy_dev, COPPER_CONTROL_REG);
-		val |= PHY_LOOP_BACK;
-		val &= ~PHY_POWER_DOWN;
-		phy_write(phy_dev, COPPER_CONTROL_REG, val);
+		/* Doing phy loopback in offline state, phy resuming is
+		 * needed to power up the device.
+		 */
+		err = phy_resume(phy_dev);
+		if (err)
+			goto out;
+
+		err = phy_loopback(phy_dev, true);
 	} else {
-		phy_write(phy_dev, HNS_PHY_PAGE_REG, 0xFA);
-		phy_write(phy_dev, 1, 0x400);
-		phy_write(phy_dev, 7, 0x200);
-
-		phy_write(phy_dev, HNS_PHY_PAGE_REG, 1);
-		val = phy_read(phy_dev, COPPER_CONTROL_REG);
-		val |= PHY_POWER_DOWN;
-		phy_write(phy_dev, COPPER_CONTROL_REG, val);
-
-		phy_write(phy_dev, HNS_PHY_PAGE_REG, 0);
-		phy_write(phy_dev, 9, 0xF00);
-
-		val = phy_read(phy_dev, COPPER_CONTROL_REG);
-		val &= ~PHY_LOOP_BACK;
-		val |= PHY_POWER_DOWN;
-		phy_write(phy_dev, COPPER_CONTROL_REG, val);
+		err = phy_loopback(phy_dev, false);
+		if (err)
+			goto out;
+
+		err = phy_suspend(phy_dev);
 	}
-	return 0;
+
+out:
+	return err;
 }
 
 static int __lb_setup(struct net_device *ndev,
@@ -332,10 +292,9 @@ static int __lb_setup(struct net_device *ndev,
 
 	switch (loop) {
 	case MAC_INTERNALLOOP_PHY:
-		if ((phy_dev) && (!phy_dev->is_c45)) {
-			ret = hns_nic_config_phy_loopback(phy_dev, 0x1);
-			ret |= h->dev->ops->set_loopback(h, loop, 0x1);
-		}
+		ret = hns_nic_config_phy_loopback(phy_dev, 0x1);
+		if (!ret)
+			ret = h->dev->ops->set_loopback(h, loop, 0x1);
 		break;
 	case MAC_INTERNALLOOP_MAC:
 		if ((h->dev->ops->set_loopback) &&
@@ -346,17 +305,17 @@ static int __lb_setup(struct net_device *ndev,
 		if (h->dev->ops->set_loopback)
 			ret = h->dev->ops->set_loopback(h, loop, 0x1);
 		break;
+	case MAC_LOOP_PHY_NONE:
+		ret = hns_nic_config_phy_loopback(phy_dev, 0x0);
 	case MAC_LOOP_NONE:
-		if ((phy_dev) && (!phy_dev->is_c45))
-			ret |= hns_nic_config_phy_loopback(phy_dev, 0x0);
-
-		if (h->dev->ops->set_loopback) {
+		if (!ret && h->dev->ops->set_loopback) {
 			if (priv->ae_handle->phy_if != PHY_INTERFACE_MODE_XGMII)
-				ret |= h->dev->ops->set_loopback(h,
+				ret = h->dev->ops->set_loopback(h,
 					MAC_INTERNALLOOP_MAC, 0x0);
 
-			ret |= h->dev->ops->set_loopback(h,
-				MAC_INTERNALLOOP_SERDES, 0x0);
+			if (!ret)
+				ret = h->dev->ops->set_loopback(h,
+					MAC_INTERNALLOOP_SERDES, 0x0);
 		}
 		break;
 	default:
@@ -582,13 +541,16 @@ static int __lb_run_test(struct net_device *ndev,
 	return ret_val;
 }
 
-static int __lb_down(struct net_device *ndev)
+static int __lb_down(struct net_device *ndev, enum hnae_loop loop)
 {
 	struct hns_nic_priv *priv = netdev_priv(ndev);
 	struct hnae_handle *h = priv->ae_handle;
 	int ret;
 
-	ret = __lb_setup(ndev, MAC_LOOP_NONE);
+	if (loop == MAC_INTERNALLOOP_PHY)
+		ret = __lb_setup(ndev, MAC_LOOP_PHY_NONE);
+	else
+		ret = __lb_setup(ndev, MAC_LOOP_NONE);
 	if (ret)
 		netdev_err(ndev, "%s: __lb_setup return error(%d)!\n",
 			   __func__,
@@ -644,7 +606,8 @@ static void hns_nic_self_test(struct net_device *ndev,
 			if (!data[test_index]) {
 				data[test_index] = __lb_run_test(
 					ndev, (enum hnae_loop)st_param[i][0]);
-				(void)__lb_down(ndev);
+				(void)__lb_down(ndev,
+						(enum hnae_loop)st_param[i][0]);
 			}
 
 			if (data[test_index])
-- 
1.9.1

Re: [PATCH NET V7 0/2] Add loopback support in phy_driver and hns ethtool fix

[David Miller]

From: Lin Yun Sheng <linyunsheng@huawei.com>
Date: Wed, 28 Jun 2017 17:13:09 +0800

> This Patch Set add set_loopback in phy_driver and use it to setup loopback
> when doing ethtool phy self_test.

This doesn't apply cleanly to the net-next tree, please respin.

Thank you.

Re: [PATCH NET V7 0/2] Add loopback support in phy_driver and hns ethtool fix

[Andrew Lunn]

On Thu, Jun 29, 2017 at 02:14:55PM -0400, David Miller wrote:
> From: Lin Yun Sheng <linyunsheng@huawei.com>
> Date: Wed, 28 Jun 2017 17:13:09 +0800
> 
> > This Patch Set add set_loopback in phy_driver and use it to setup loopback
> > when doing ethtool phy self_test.
> 
> This doesn't apply cleanly to the net-next tree, please respin.

Hi David

This patchset still has issues. The first patch is O.K. to be
committed, but the second patch to the hns driver still has issues. I
suppose it makes the hns driver less broken, but it is still
broken. Is less broken a sufficient criteria for acceptance?

	Andrew

Re: [PATCH NET V7 0/2] Add loopback support in phy_driver and hns ethtool fix

[David Miller]

From: Andrew Lunn <andrew@lunn.ch>
Date: Thu, 29 Jun 2017 20:22:16 +0200

Is less broken a sufficient criteria for acceptance?

Sometimes, it depends upon the situation.

If you are continuing to resolve those issues, I'll wait and
watch for future respins then.

Re: [PATCH NET V7 0/2] Add loopback support in phy_driver and hns ethtool fix

[Yunsheng Lin]

Hi, David

I will send out a patch based on net-next, and
I will continue to address the problem andrew pointed
out. If I come out with a doable solution, I will send
out the new patch.

Best Regards
Yunsheng Lin

On 2017/6/30 4:08, David Miller wrote:
> From: Andrew Lunn <andrew@lunn.ch>
> Date: Thu, 29 Jun 2017 20:22:16 +0200
> 
> Is less broken a sufficient criteria for acceptance?
> 
> Sometimes, it depends upon the situation.
> 
> If you are continuing to resolve those issues, I'll wait and
> watch for future respins then.
> 
> .
>