[PATCH V1]: clk: qcom: support qpnp clock divider configuration

[PATCH V1]: clk: qcom: support qpnp clock divider configuration

[Tirupathi Reddy]

This patch adds a new device driver for configuring the clkdiv module
presents on the Qualcomm QPNP PMIC. The driver configures the frequency
of clkdiv outputs. The driver provides callback functions for different
clock operations and register the clkdiv module to clock framework.

Tirupathi Reddy (1):
  clk: qcom: Add qpnp clock divider support

 .../devicetree/bindings/clock/clk-qpnp-div.txt     |  52 +++
 drivers/clk/qcom/Kconfig                           |   9 +
 drivers/clk/qcom/Makefile                          |   1 +
 drivers/clk/qcom/clk-qpnp-div.c                    | 422 +++++++++++++++++++++
 4 files changed, 484 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/clk-qpnp-div.txt
 create mode 100644 drivers/clk/qcom/clk-qpnp-div.c

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

[PATCH V1] clk: qcom: Add qpnp clock divider support

[Tirupathi Reddy]

Clkdiv module provides a clock output on the PMIC with CXO as
the source. This clock can be routed through PMIC GPIOs. Add
a device driver to configure this clkdiv module.

Signed-off-by: Tirupathi Reddy <tirupath@codeaurora.org>
---
 .../devicetree/bindings/clock/clk-qpnp-div.txt     |  52 +++
 drivers/clk/qcom/Kconfig                           |   9 +
 drivers/clk/qcom/Makefile                          |   1 +
 drivers/clk/qcom/clk-qpnp-div.c                    | 422 +++++++++++++++++++++
 4 files changed, 484 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/clk-qpnp-div.txt
 create mode 100644 drivers/clk/qcom/clk-qpnp-div.c

diff --git a/Documentation/devicetree/bindings/clock/clk-qpnp-div.txt b/Documentation/devicetree/bindings/clock/clk-qpnp-div.txt
new file mode 100644
index 0000000..03b7b70
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/clk-qpnp-div.txt
@@ -0,0 +1,52 @@
+Qualcomm Technologies, Inc. QPNP clock divider (clkdiv)
+
+clkdiv configures the clock frequency of a set of outputs on the PMIC.
+These clocks are typically wired through alternate functions on
+gpio pins.
+
+=======================
+Supported Properties
+=======================
+
+- compatible
+	Usage:      required
+	Value type: <string>
+	Definition: should be "qcom,qpnp-clkdiv".
+
+- reg
+	Usage:      required
+	Value type: <prop-encoded-array>
+	Definition: Addresses and sizes for the memory of this CLKDIV
+		    peripheral.
+
+- qcom,cxo-freq
+	Usage:      required
+	Value type: <u32>
+	Definition: The frequency of the crystal oscillator (CXO) clock in Hz.
+
+- qcom,clkdiv-id
+	Usage:      required
+	Value type: <u32>
+	Definition: Integer value specifies the hardware identifier of this
+		    CLKDIV peripheral.
+
+- qcom,clkdiv-init-freq
+	Usage:      optional
+	Value type: <u32>
+	Definition: Initial output frequency in Hz to configure for the CLKDIV
+		    peripheral. The initial frequency value should be less than
+		    or equal to CXO clock frequency and greater than or equal to
+		    CXO_freq/64.
+
+=======
+Example
+=======
+
+qcom,clkdiv@5b00 {
+	compatible = "qcom,qpnp-clkdiv";
+	reg = <0x5b00 0x100>;
+
+	qcom,cxo-freq = <19200000>;
+	qcom,clkdiv-id = <1>;
+	qcom,clkdiv-init-freq = <9600000>;
+};
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 9f6c278..c68ae96 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -196,3 +196,12 @@ config MSM_MMCC_8996
 	  Support for the multimedia clock controller on msm8996 devices.
 	  Say Y if you want to support multimedia devices such as display,
 	  graphics, video encode/decode, camera, etc.
+
+config CLOCK_QPNP_DIV
+	tristate "QPNP PMIC clkdiv driver"
+	depends on COMMON_CLK_QCOM && SPMI
+	help
+	  This driver supports the clkdiv functionality on the Qualcomm
+	  Technologies, Inc. QPNP PMIC. It configures the frequency of
+	  clkdiv outputs on the PMIC. These clocks are typically wired
+	  through alternate functions on gpio pins.
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 3f3aff2..cca8840 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -33,3 +33,4 @@ obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o
 obj-$(CONFIG_MSM_MMCC_8996) += mmcc-msm8996.o
 obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o
 obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
+obj-$(CONFIG_CLOCK_QPNP_DIV) += clk-qpnp-div.o
diff --git a/drivers/clk/qcom/clk-qpnp-div.c b/drivers/clk/qcom/clk-qpnp-div.c
new file mode 100644
index 0000000..416c20f
--- /dev/null
+++ b/drivers/clk/qcom/clk-qpnp-div.c
@@ -0,0 +1,422 @@
+/* Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/log2.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+
+#define Q_REG_DIV_CTL1			0x43
+#define Q_DIV_CTL1_DIV_FACTOR_MASK	GENMASK(2, 0)
+
+#define Q_REG_EN_CTL			0x46
+#define Q_REG_EN_MASK			BIT(7)
+#define Q_SET_EN			BIT(7)
+
+#define Q_CXO_PERIOD_NS(cxo_clk)	(NSEC_PER_SEC / cxo_clk)
+#define Q_DIV_PERIOD_NS(cxo_clk, div)	(NSEC_PER_SEC / (cxo_clk / div))
+#define Q_ENABLE_DELAY_NS(cxo_clk, div)	(2 * Q_CXO_PERIOD_NS(cxo_clk) + \
+					(3 * Q_DIV_PERIOD_NS(cxo_clk, div)))
+#define Q_DISABLE_DELAY_NS(cxo_clk, div) \
+					(3 * Q_DIV_PERIOD_NS(cxo_clk, div))
+
+#define CLK_QPNP_DIV_OFFSET		1
+
+enum q_clk_div_factor {
+	Q_CLKDIV_XO_DIV_1_0 = 0,
+	Q_CLKDIV_XO_DIV_1,
+	Q_CLKDIV_XO_DIV_2,
+	Q_CLKDIV_XO_DIV_4,
+	Q_CLKDIV_XO_DIV_8,
+	Q_CLKDIV_XO_DIV_16,
+	Q_CLKDIV_XO_DIV_32,
+	Q_CLKDIV_XO_DIV_64,
+	Q_CLKDIV_MAX_ALLOWED,
+};
+
+enum q_clkdiv_state {
+	DISABLE = false,
+	ENABLE = true,
+};
+
+struct q_clkdiv {
+	struct regmap		*regmap;
+	struct device		*dev;
+
+	u16			base;
+	spinlock_t		lock;
+
+	/* clock properties */
+	struct clk_hw		hw;
+	unsigned int		cxo_hz;
+	enum q_clk_div_factor	div_factor;
+	bool			enabled;
+};
+
+static inline struct q_clkdiv *to_clkdiv(struct clk_hw *_hw)
+{
+	return container_of(_hw, struct q_clkdiv, hw);
+}
+
+static inline unsigned int div_factor_to_div(unsigned int div_factor)
+{
+	if (div_factor == Q_CLKDIV_XO_DIV_1_0)
+		return 1;
+
+	return 1 << (div_factor - CLK_QPNP_DIV_OFFSET);
+}
+
+static inline unsigned int div_to_div_factor(unsigned int div)
+{
+	return ilog2(div) + CLK_QPNP_DIV_OFFSET;
+}
+
+static int qpnp_clkdiv_masked_write(struct q_clkdiv *q_clkdiv, u16 offset,
+			u8 mask, u8 val)
+{
+	int rc;
+
+	rc = regmap_update_bits(q_clkdiv->regmap, q_clkdiv->base + offset, mask,
+				val);
+	if (rc)
+		dev_err(q_clkdiv->dev,
+			"Unable to regmap_update_bits to addr=%hx, rc(%d)\n",
+			q_clkdiv->base + offset, rc);
+
+	return rc;
+}
+
+static int qpnp_clkdiv_set_enable_state(struct q_clkdiv *q_clkdiv,
+			enum q_clkdiv_state enable_state)
+{
+	int rc;
+
+	rc = qpnp_clkdiv_masked_write(q_clkdiv, Q_REG_EN_CTL, Q_REG_EN_MASK,
+				(enable_state == ENABLE) ? Q_SET_EN : 0);
+	if (rc)
+		return rc;
+
+	if (enable_state == ENABLE)
+		ndelay(Q_ENABLE_DELAY_NS(q_clkdiv->cxo_hz,
+				div_factor_to_div(q_clkdiv->div_factor)));
+	else
+		ndelay(Q_DISABLE_DELAY_NS(q_clkdiv->cxo_hz,
+				div_factor_to_div(q_clkdiv->div_factor)));
+
+	return rc;
+}
+
+static int qpnp_clkdiv_config_freq_div(struct q_clkdiv *q_clkdiv,
+			unsigned int div)
+{
+	unsigned int div_factor;
+	int rc;
+
+	div_factor = div_to_div_factor(div);
+	if (div_factor <= 0 || div_factor >= Q_CLKDIV_MAX_ALLOWED)
+		return -EINVAL;
+
+	if (q_clkdiv->enabled) {
+		rc = qpnp_clkdiv_set_enable_state(q_clkdiv, DISABLE);
+		if (rc) {
+			dev_err(q_clkdiv->dev, "unable to disable clock, rc = %d\n",
+				rc);
+			return rc;
+		}
+	}
+
+	rc = qpnp_clkdiv_masked_write(q_clkdiv, Q_REG_DIV_CTL1,
+				Q_DIV_CTL1_DIV_FACTOR_MASK, div_factor);
+	if (rc) {
+		dev_err(q_clkdiv->dev, "config divider failed, rc=%d\n",
+			rc);
+		return rc;
+	}
+
+	q_clkdiv->div_factor = div_factor;
+
+	if (q_clkdiv->enabled) {
+		rc = qpnp_clkdiv_set_enable_state(q_clkdiv, ENABLE);
+		if (rc)
+			dev_err(q_clkdiv->dev, "unable to re-enable clock, rc = %d\n",
+				rc);
+	}
+
+	return rc;
+}
+
+static int clk_qpnp_div_enable(struct clk_hw *hw)
+{
+	struct q_clkdiv *q_clkdiv = to_clkdiv(hw);
+	unsigned long flags;
+	int rc;
+
+	spin_lock_irqsave(&q_clkdiv->lock, flags);
+
+	rc =  qpnp_clkdiv_set_enable_state(q_clkdiv, ENABLE);
+	if (rc) {
+		dev_err(q_clkdiv->dev, "clk enable failed, rc=%d\n", rc);
+		goto fail;
+	}
+
+	q_clkdiv->enabled = true;
+
+fail:
+	spin_unlock_irqrestore(&q_clkdiv->lock, flags);
+	return rc;
+}
+
+static void clk_qpnp_div_disable(struct clk_hw *hw)
+{
+	struct q_clkdiv *q_clkdiv = to_clkdiv(hw);
+	unsigned long flags;
+	int rc;
+
+	spin_lock_irqsave(&q_clkdiv->lock, flags);
+
+	rc = qpnp_clkdiv_set_enable_state(q_clkdiv, DISABLE);
+	if (rc) {
+		dev_err(q_clkdiv->dev, "clk disable failed, rc=%d\n", rc);
+		goto fail;
+	}
+
+	q_clkdiv->enabled = false;
+
+fail:
+	spin_unlock_irqrestore(&q_clkdiv->lock, flags);
+}
+
+static long clk_qpnp_div_round_rate(struct clk_hw *hw, unsigned long rate,
+			unsigned long *parent_rate)
+{
+	struct q_clkdiv *q_clkdiv = to_clkdiv(hw);
+	unsigned long flags, new_rate;
+	unsigned int div, div_factor;
+
+	spin_lock_irqsave(&q_clkdiv->lock, flags);
+	if (rate <= 0 || rate > q_clkdiv->cxo_hz) {
+		dev_err(q_clkdiv->dev, "invalid rate requested, rate = %lu\n",
+			rate);
+		spin_unlock_irqrestore(&q_clkdiv->lock, flags);
+		return -EINVAL;
+	}
+
+	div = DIV_ROUND_UP(q_clkdiv->cxo_hz, rate);
+	div_factor = div_to_div_factor(div);
+	if (div_factor >= Q_CLKDIV_MAX_ALLOWED)
+		div_factor = Q_CLKDIV_MAX_ALLOWED - 1;
+	new_rate = q_clkdiv->cxo_hz / div_factor_to_div(div_factor);
+
+	spin_unlock_irqrestore(&q_clkdiv->lock, flags);
+	return new_rate;
+}
+
+static unsigned long clk_qpnp_div_recalc_rate(struct clk_hw *hw,
+			unsigned long parent_rate)
+{
+	struct q_clkdiv *q_clkdiv = to_clkdiv(hw);
+	unsigned long rate, flags;
+
+	spin_lock_irqsave(&q_clkdiv->lock, flags);
+
+	rate = q_clkdiv->cxo_hz / div_factor_to_div(q_clkdiv->div_factor);
+
+	spin_unlock_irqrestore(&q_clkdiv->lock, flags);
+	return rate;
+}
+
+static int clk_qpnp_div_set_rate(struct clk_hw *hw, unsigned long rate,
+			unsigned long parent_rate)
+{
+	struct q_clkdiv *q_clkdiv = to_clkdiv(hw);
+	unsigned long flags;
+	int rc = 0;
+
+	spin_lock_irqsave(&q_clkdiv->lock, flags);
+	if (rate <= 0 || rate > q_clkdiv->cxo_hz) {
+		dev_err(q_clkdiv->dev, "invalid rate requested, rate = %lu\n",
+			rate);
+		rc = -EINVAL;
+		goto fail;
+	}
+
+	rc = qpnp_clkdiv_config_freq_div(q_clkdiv, q_clkdiv->cxo_hz / rate);
+	if (rc)
+		dev_err(q_clkdiv->dev, "clkdiv set rate(%lu) failed, rc = %d\n",
+			rate, rc);
+
+fail:
+	spin_unlock_irqrestore(&q_clkdiv->lock, flags);
+	return rc;
+}
+
+const struct clk_ops clk_qpnp_div_ops = {
+	.enable = clk_qpnp_div_enable,
+	.disable = clk_qpnp_div_disable,
+	.set_rate = clk_qpnp_div_set_rate,
+	.recalc_rate = clk_qpnp_div_recalc_rate,
+	.round_rate = clk_qpnp_div_round_rate,
+};
+
+#define QPNP_CLKDIV_MAX_NAME_LEN	16
+
+static int qpnp_clkdiv_probe(struct platform_device *pdev)
+{
+	struct q_clkdiv *q_clkdiv;
+	struct device *dev = &pdev->dev;
+	struct device_node *of_node = dev->of_node;
+	struct clk_init_data *init;
+	struct clk_onecell_data *clk_data;
+	struct clk *clk;
+	unsigned int base, div, init_freq;
+	int rc = 0, id;
+	char *clk_name;
+
+	q_clkdiv = devm_kzalloc(dev, sizeof(*q_clkdiv), GFP_KERNEL);
+	if (!q_clkdiv)
+		return -ENOMEM;
+
+	q_clkdiv->regmap = dev_get_regmap(dev->parent, NULL);
+	if (!q_clkdiv->regmap) {
+		dev_err(dev, "Couldn't get parent's regmap\n");
+		return -EINVAL;
+	}
+	q_clkdiv->dev = dev;
+
+	rc = of_property_read_u32(of_node, "reg", &base);
+	if (rc < 0) {
+		dev_err(dev, "Couldn't find reg in node = %s, rc = %d\n",
+			of_node->full_name, rc);
+		return rc;
+	}
+	q_clkdiv->base = base;
+
+	/* init clock properties */
+	rc = of_property_read_u32(of_node, "qcom,cxo-freq", &q_clkdiv->cxo_hz);
+	if (rc) {
+		dev_err(dev, "unable to get qcom,cxo-freq property, rc = %d\n",
+			rc);
+		return rc;
+	}
+
+	q_clkdiv->div_factor = Q_CLKDIV_XO_DIV_1_0;
+	rc = of_property_read_u32(of_node, "qcom,clkdiv-init-freq", &init_freq);
+	if (rc) {
+		if (rc != -EINVAL) {
+			dev_err(dev, "Unable to read initial frequency value, rc=%d\n",
+				rc);
+			return rc;
+		}
+	} else {
+		if (init_freq <= 0 || init_freq > q_clkdiv->cxo_hz) {
+			dev_err(dev, "invalid initial frequency specified, rate = %u\n",
+				init_freq);
+			return -EINVAL;
+		}
+
+		div = DIV_ROUND_UP(q_clkdiv->cxo_hz, init_freq);
+		q_clkdiv->div_factor = div_to_div_factor(div);
+		if (q_clkdiv->div_factor >= Q_CLKDIV_MAX_ALLOWED)
+			q_clkdiv->div_factor = Q_CLKDIV_MAX_ALLOWED - 1;
+		rc = qpnp_clkdiv_config_freq_div(q_clkdiv,
+				div_factor_to_div(q_clkdiv->div_factor));
+		if (rc) {
+			dev_err(dev, "Config initial frequency failed, rc = %d\n",
+				rc);
+			return rc;
+		}
+	}
+
+	init = devm_kzalloc(dev, sizeof(*init), GFP_KERNEL);
+	if (!init)
+		return -ENOMEM;
+
+	rc = of_property_read_u32(of_node, "qcom,clkdiv-id", &id);
+	if (rc) {
+		dev_err(dev, "Unable to read clkdiv node id, rc = %d\n", rc);
+		return rc;
+	}
+
+	clk_name = devm_kcalloc(dev, QPNP_CLKDIV_MAX_NAME_LEN,
+				sizeof(*clk_name), GFP_KERNEL);
+	if (!clk_name)
+		return -ENOMEM;
+	snprintf(clk_name, QPNP_CLKDIV_MAX_NAME_LEN, "qpnp_clkdiv_%d", id);
+
+	init->name = clk_name;
+	init->ops = &clk_qpnp_div_ops;
+	q_clkdiv->hw.init = init;
+	spin_lock_init(&q_clkdiv->lock);
+
+	clk_data = devm_kzalloc(dev, sizeof(*clk_data), GFP_KERNEL);
+	if (!clk_data)
+		return -ENOMEM;
+
+	clk_data->clks = devm_kzalloc(dev, sizeof(*clk_data->clks), GFP_KERNEL);
+	if (!clk_data->clks)
+		return -ENOMEM;
+
+	clk = devm_clk_register(dev, &q_clkdiv->hw);
+	if (IS_ERR(clk)) {
+		dev_err(dev, "Unable to register qpnp div clock\n");
+		return PTR_ERR(clk);
+	}
+
+	clk_data->clk_num = 1;
+	clk_data->clks[0] = clk;
+
+	rc = of_clk_add_provider(of_node, of_clk_src_onecell_get, clk_data);
+	if (rc) {
+		dev_err(dev, "Unable to register qpnp div clock provider, rc = %d\n",
+			rc);
+		return rc;
+	}
+
+	dev_set_drvdata(dev, q_clkdiv);
+	dev_info(dev, "Registered %s successfully\n", clk_name);
+
+	return rc;
+}
+
+static const struct of_device_id qpnp_clkdiv_match_table[] = {
+	{ .compatible = "qcom,qpnp-clkdiv" },
+	{}
+};
+
+static struct platform_driver qpnp_clkdiv_driver = {
+	.driver		= {
+		.name	= "qcom,qpnp-clkdiv",
+		.of_match_table = qpnp_clkdiv_match_table,
+	},
+	.probe		= qpnp_clkdiv_probe,
+};
+
+static int __init qpnp_clkdiv_init(void)
+{
+	return platform_driver_register(&qpnp_clkdiv_driver);
+}
+module_init(qpnp_clkdiv_init);
+
+static void __exit qpnp_clkdiv_exit(void)
+{
+	return platform_driver_unregister(&qpnp_clkdiv_driver);
+}
+module_exit(qpnp_clkdiv_exit);
+
+MODULE_DESCRIPTION("QPNP PMIC clkdiv driver");
+MODULE_LICENSE("GPL v2");
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

Re: [PATCH V1] clk: qcom: Add qpnp clock divider support

[Stephen Boyd]

On 07/13, Tirupathi Reddy wrote:
> diff --git a/Documentation/devicetree/bindings/clock/clk-qpnp-div.txt b/Documentation/devicetree/bindings/clock/clk-qpnp-div.txt
> new file mode 100644
> index 0000000..03b7b70
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/clk-qpnp-div.txt
> @@ -0,0 +1,52 @@
> +Qualcomm Technologies, Inc. QPNP clock divider (clkdiv)
> +
> +clkdiv configures the clock frequency of a set of outputs on the PMIC.
> +These clocks are typically wired through alternate functions on
> +gpio pins.
> +
> +=======================
> +Supported Properties
> +=======================
> +
> +- compatible
> +	Usage:      required
> +	Value type: <string>
> +	Definition: should be "qcom,qpnp-clkdiv".
> +
> +- reg
> +	Usage:      required
> +	Value type: <prop-encoded-array>
> +	Definition: Addresses and sizes for the memory of this CLKDIV
> +		    peripheral.
> +
> +- qcom,cxo-freq
> +	Usage:      required
> +	Value type: <u32>
> +	Definition: The frequency of the crystal oscillator (CXO) clock in Hz.

CXO should be a parent clk then. This could have clocks and
clock-names properties for that and then be hooked up to
xo_board.

> +
> +- qcom,clkdiv-id
> +	Usage:      required
> +	Value type: <u32>
> +	Definition: Integer value specifies the hardware identifier of this
> +		    CLKDIV peripheral.

This is to name the clk? You could use clock-output-names as
that's more standard. But this is also sort of confusing. If
there are multiple clkdivs then it would be good to combine them
into one device node assuming they're all next to each other.
This would be similar to how we handle gpios and regulators. Then
the naming is simple enough to be an incrementing number.

> +
> +- qcom,clkdiv-init-freq
> +	Usage:      optional
> +	Value type: <u32>
> +	Definition: Initial output frequency in Hz to configure for the CLKDIV
> +		    peripheral. The initial frequency value should be less than
> +		    or equal to CXO clock frequency and greater than or equal to
> +		    CXO_freq/64.

Use assigned-clock-rates instead.

> +
> +=======
> +Example
> +=======
> +
> +qcom,clkdiv@5b00 {
> +	compatible = "qcom,qpnp-clkdiv";
> +	reg = <0x5b00 0x100>;
> +
> +	qcom,cxo-freq = <19200000>;
> +	qcom,clkdiv-id = <1>;
> +	qcom,clkdiv-init-freq = <9600000>;
> +};
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> index 9f6c278..c68ae96 100644
> --- a/drivers/clk/qcom/Kconfig
> +++ b/drivers/clk/qcom/Kconfig
> @@ -196,3 +196,12 @@ config MSM_MMCC_8996
>  	  Support for the multimedia clock controller on msm8996 devices.
>  	  Say Y if you want to support multimedia devices such as display,
>  	  graphics, video encode/decode, camera, etc.
> +
> +config CLOCK_QPNP_DIV
> +	tristate "QPNP PMIC clkdiv driver"
> +	depends on COMMON_CLK_QCOM && SPMI

COMPILE_TEST?

> +	help
> +	  This driver supports the clkdiv functionality on the Qualcomm
> +	  Technologies, Inc. QPNP PMIC. It configures the frequency of

I'm not sure we ever really call it QPNP PMIC. I see one hit from
grep for the thermal driver. Perhaps SPMI PMIC is more
appropriate.

> +	  clkdiv outputs on the PMIC. These clocks are typically wired
> +	  through alternate functions on gpio pins.
> diff --git a/drivers/clk/qcom/clk-qpnp-div.c b/drivers/clk/qcom/clk-qpnp-div.c
> new file mode 100644
> index 0000000..416c20f
> --- /dev/null
> +++ b/drivers/clk/qcom/clk-qpnp-div.c
> @@ -0,0 +1,422 @@
> +/* Copyright (c) 2017, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/log2.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/types.h>

bitops.h?

> +
> +#define Q_REG_DIV_CTL1			0x43
> +#define Q_DIV_CTL1_DIV_FACTOR_MASK	GENMASK(2, 0)
> +
> +#define Q_REG_EN_CTL			0x46
> +#define Q_REG_EN_MASK			BIT(7)
> +#define Q_SET_EN			BIT(7)
> +
> +#define Q_CXO_PERIOD_NS(cxo_clk)	(NSEC_PER_SEC / cxo_clk)
> +#define Q_DIV_PERIOD_NS(cxo_clk, div)	(NSEC_PER_SEC / (cxo_clk / div))
> +#define Q_ENABLE_DELAY_NS(cxo_clk, div)	(2 * Q_CXO_PERIOD_NS(cxo_clk) + \
> +					(3 * Q_DIV_PERIOD_NS(cxo_clk, div)))
> +#define Q_DISABLE_DELAY_NS(cxo_clk, div) \
> +					(3 * Q_DIV_PERIOD_NS(cxo_clk, div))
> +
> +#define CLK_QPNP_DIV_OFFSET		1
> +
> +enum q_clk_div_factor {
> +	Q_CLKDIV_XO_DIV_1_0 = 0,
> +	Q_CLKDIV_XO_DIV_1,
> +	Q_CLKDIV_XO_DIV_2,
> +	Q_CLKDIV_XO_DIV_4,
> +	Q_CLKDIV_XO_DIV_8,
> +	Q_CLKDIV_XO_DIV_16,
> +	Q_CLKDIV_XO_DIV_32,
> +	Q_CLKDIV_XO_DIV_64,
> +	Q_CLKDIV_MAX_ALLOWED,

Please make #defines for these instead of enum.

> +};
> +
> +enum q_clkdiv_state {
> +	DISABLE = false,
> +	ENABLE = true,
> +};

Uh no. Just use bool.

> +
> +struct q_clkdiv {
> +	struct regmap		*regmap;
> +	struct device		*dev;
> +
> +	u16			base;
> +	spinlock_t		lock;
> +
> +	/* clock properties */
> +	struct clk_hw		hw;
> +	unsigned int		cxo_hz;

Drop.

> +	enum q_clk_div_factor	div_factor;
> +	bool			enabled;

Shouldn't be needed. Read the hardware instead.

> +};
> +
> +static inline struct q_clkdiv *to_clkdiv(struct clk_hw *_hw)

_hw can just be hw?

> +{
> +	return container_of(_hw, struct q_clkdiv, hw);
> +}
> +
> +static inline unsigned int div_factor_to_div(unsigned int div_factor)
> +{
> +	if (div_factor == Q_CLKDIV_XO_DIV_1_0)
> +		return 1;
> +
> +	return 1 << (div_factor - CLK_QPNP_DIV_OFFSET);
> +}

Not sure, but it may be possible to reuse the code in
clk-divider.c and treat this as a CLK_DIVIDER_POWER_OF_TWO?

> +
> +static inline unsigned int div_to_div_factor(unsigned int div)
> +{
> +	return ilog2(div) + CLK_QPNP_DIV_OFFSET;
> +}
> +
> +static int qpnp_clkdiv_masked_write(struct q_clkdiv *q_clkdiv, u16 offset,

Please replace instances of qpnp with spmi_pmic throughout this
driver.

Also, why do we need a wrapper around regmap APIs? Please just
use the APIs directly.

> +			u8 mask, u8 val)
> +{
> +	int rc;
> +
> +	rc = regmap_update_bits(q_clkdiv->regmap, q_clkdiv->base + offset, mask,
> +				val);
> +	if (rc)
> +		dev_err(q_clkdiv->dev,
> +			"Unable to regmap_update_bits to addr=%hx, rc(%d)\n",
> +			q_clkdiv->base + offset, rc);
> +
> +	return rc;
> +}
> +
> +static int qpnp_clkdiv_set_enable_state(struct q_clkdiv *q_clkdiv,
> +			enum q_clkdiv_state enable_state)
> +{
> +	int rc;
> +
> +	rc = qpnp_clkdiv_masked_write(q_clkdiv, Q_REG_EN_CTL, Q_REG_EN_MASK,
> +				(enable_state == ENABLE) ? Q_SET_EN : 0);
> +	if (rc)
> +		return rc;
> +
> +	if (enable_state == ENABLE)
> +		ndelay(Q_ENABLE_DELAY_NS(q_clkdiv->cxo_hz,
> +				div_factor_to_div(q_clkdiv->div_factor)));

Can this factor can be precalculated at probe time based on
XO rate? And then we just multiply that factor with the divider
value to figure out how long to wait?

> +	else
> +		ndelay(Q_DISABLE_DELAY_NS(q_clkdiv->cxo_hz,
> +				div_factor_to_div(q_clkdiv->div_factor)));
> +
> +	return rc;
> +}
> +
> +static int qpnp_clkdiv_config_freq_div(struct q_clkdiv *q_clkdiv,
> +			unsigned int div)
> +{
> +	unsigned int div_factor;
> +	int rc;
> +
> +	div_factor = div_to_div_factor(div);
> +	if (div_factor <= 0 || div_factor >= Q_CLKDIV_MAX_ALLOWED)
> +		return -EINVAL;
> +
> +	if (q_clkdiv->enabled) {
> +		rc = qpnp_clkdiv_set_enable_state(q_clkdiv, DISABLE);
> +		if (rc) {
> +			dev_err(q_clkdiv->dev, "unable to disable clock, rc = %d\n",
> +				rc);
> +			return rc;
> +		}
> +	}
> +
> +	rc = qpnp_clkdiv_masked_write(q_clkdiv, Q_REG_DIV_CTL1,
> +				Q_DIV_CTL1_DIV_FACTOR_MASK, div_factor);
> +	if (rc) {
> +		dev_err(q_clkdiv->dev, "config divider failed, rc=%d\n",
> +			rc);
> +		return rc;
> +	}
> +
> +	q_clkdiv->div_factor = div_factor;
> +
> +	if (q_clkdiv->enabled) {
> +		rc = qpnp_clkdiv_set_enable_state(q_clkdiv, ENABLE);
> +		if (rc)
> +			dev_err(q_clkdiv->dev, "unable to re-enable clock, rc = %d\n",
> +				rc);
> +	}
> +
> +	return rc;
> +}
> +
> +static int clk_qpnp_div_enable(struct clk_hw *hw)
> +{
> +	struct q_clkdiv *q_clkdiv = to_clkdiv(hw);
> +	unsigned long flags;
> +	int rc;
> +
> +	spin_lock_irqsave(&q_clkdiv->lock, flags);

What is this locking against? Rate change?

> +
> +	rc =  qpnp_clkdiv_set_enable_state(q_clkdiv, ENABLE);
> +	if (rc) {
> +		dev_err(q_clkdiv->dev, "clk enable failed, rc=%d\n", rc);
> +		goto fail;
> +	}
> +
> +	q_clkdiv->enabled = true;
> +
> +fail:
> +	spin_unlock_irqrestore(&q_clkdiv->lock, flags);
> +	return rc;
> +}
> +
> +static void clk_qpnp_div_disable(struct clk_hw *hw)
> +{
> +	struct q_clkdiv *q_clkdiv = to_clkdiv(hw);
> +	unsigned long flags;
> +	int rc;
> +
> +	spin_lock_irqsave(&q_clkdiv->lock, flags);
> +
> +	rc = qpnp_clkdiv_set_enable_state(q_clkdiv, DISABLE);
> +	if (rc) {
> +		dev_err(q_clkdiv->dev, "clk disable failed, rc=%d\n", rc);
> +		goto fail;
> +	}
> +
> +	q_clkdiv->enabled = false;
> +
> +fail:
> +	spin_unlock_irqrestore(&q_clkdiv->lock, flags);
> +}
> +
> +static long clk_qpnp_div_round_rate(struct clk_hw *hw, unsigned long rate,
> +			unsigned long *parent_rate)
> +{
> +	struct q_clkdiv *q_clkdiv = to_clkdiv(hw);
> +	unsigned long flags, new_rate;
> +	unsigned int div, div_factor;
> +
> +	spin_lock_irqsave(&q_clkdiv->lock, flags);
> +	if (rate <= 0 || rate > q_clkdiv->cxo_hz) {

How can rate be less than zero? It's unsigned! And if it's
greater than some parent rate, round_rate() should return the
largest rate it can support (I guess parent_rate?)

> +		dev_err(q_clkdiv->dev, "invalid rate requested, rate = %lu\n",
> +			rate);
> +		spin_unlock_irqrestore(&q_clkdiv->lock, flags);

Also what are we spinlocking for?

> +		return -EINVAL;
> +	}
> +
> +	div = DIV_ROUND_UP(q_clkdiv->cxo_hz, rate);
> +	div_factor = div_to_div_factor(div);
> +	if (div_factor >= Q_CLKDIV_MAX_ALLOWED)
> +		div_factor = Q_CLKDIV_MAX_ALLOWED - 1;
> +	new_rate = q_clkdiv->cxo_hz / div_factor_to_div(div_factor);
> +
> +	spin_unlock_irqrestore(&q_clkdiv->lock, flags);

Shouldn't need any spinlock here...

> +	return new_rate;
> +}
> +
> +static unsigned long clk_qpnp_div_recalc_rate(struct clk_hw *hw,
> +			unsigned long parent_rate)
> +{
> +	struct q_clkdiv *q_clkdiv = to_clkdiv(hw);
> +	unsigned long rate, flags;
> +
> +	spin_lock_irqsave(&q_clkdiv->lock, flags);
> +
> +	rate = q_clkdiv->cxo_hz / div_factor_to_div(q_clkdiv->div_factor);
> +
> +	spin_unlock_irqrestore(&q_clkdiv->lock, flags);

Also confused about spinlock usage here.

> +	return rate;
> +}
> +
> +static int clk_qpnp_div_set_rate(struct clk_hw *hw, unsigned long rate,
> +			unsigned long parent_rate)
> +{
> +	struct q_clkdiv *q_clkdiv = to_clkdiv(hw);
> +	unsigned long flags;
> +	int rc = 0;
> +
> +	spin_lock_irqsave(&q_clkdiv->lock, flags);
> +	if (rate <= 0 || rate > q_clkdiv->cxo_hz) {
> +		dev_err(q_clkdiv->dev, "invalid rate requested, rate = %lu\n",
> +			rate);
> +		rc = -EINVAL;
> +		goto fail;
> +	}

Seems useless. Trust the framework won't call this op with a rate
that's invalid.

> +
> +	rc = qpnp_clkdiv_config_freq_div(q_clkdiv, q_clkdiv->cxo_hz / rate);
> +	if (rc)
> +		dev_err(q_clkdiv->dev, "clkdiv set rate(%lu) failed, rc = %d\n",
> +			rate, rc);
> +
> +fail:
> +	spin_unlock_irqrestore(&q_clkdiv->lock, flags);
> +	return rc;
> +}
> +
> +const struct clk_ops clk_qpnp_div_ops = {

static?

> +	.enable = clk_qpnp_div_enable,
> +	.disable = clk_qpnp_div_disable,
> +	.set_rate = clk_qpnp_div_set_rate,
> +	.recalc_rate = clk_qpnp_div_recalc_rate,
> +	.round_rate = clk_qpnp_div_round_rate,
> +};
> +
> +#define QPNP_CLKDIV_MAX_NAME_LEN	16
> +
> +static int qpnp_clkdiv_probe(struct platform_device *pdev)
> +{
> +	struct q_clkdiv *q_clkdiv;
> +	struct device *dev = &pdev->dev;
> +	struct device_node *of_node = dev->of_node;
> +	struct clk_init_data *init;
> +	struct clk_onecell_data *clk_data;
> +	struct clk *clk;
> +	unsigned int base, div, init_freq;
> +	int rc = 0, id;

Leave rc unassigned.

> +	char *clk_name;
> +
> +	q_clkdiv = devm_kzalloc(dev, sizeof(*q_clkdiv), GFP_KERNEL);
> +	if (!q_clkdiv)
> +		return -ENOMEM;
> +
> +	q_clkdiv->regmap = dev_get_regmap(dev->parent, NULL);
> +	if (!q_clkdiv->regmap) {
> +		dev_err(dev, "Couldn't get parent's regmap\n");
> +		return -EINVAL;
> +	}
> +	q_clkdiv->dev = dev;
> +
> +	rc = of_property_read_u32(of_node, "reg", &base);
> +	if (rc < 0) {
> +		dev_err(dev, "Couldn't find reg in node = %s, rc = %d\n",
> +			of_node->full_name, rc);
> +		return rc;
> +	}
> +	q_clkdiv->base = base;
> +
> +	/* init clock properties */
> +	rc = of_property_read_u32(of_node, "qcom,cxo-freq", &q_clkdiv->cxo_hz);
> +	if (rc) {
> +		dev_err(dev, "unable to get qcom,cxo-freq property, rc = %d\n",
> +			rc);
> +		return rc;
> +	}
> +
> +	q_clkdiv->div_factor = Q_CLKDIV_XO_DIV_1_0;
> +	rc = of_property_read_u32(of_node, "qcom,clkdiv-init-freq", &init_freq);
> +	if (rc) {
> +		if (rc != -EINVAL) {
> +			dev_err(dev, "Unable to read initial frequency value, rc=%d\n",
> +				rc);
> +			return rc;
> +		}
> +	} else {
> +		if (init_freq <= 0 || init_freq > q_clkdiv->cxo_hz) {
> +			dev_err(dev, "invalid initial frequency specified, rate = %u\n",
> +				init_freq);
> +			return -EINVAL;
> +		}
> +
> +		div = DIV_ROUND_UP(q_clkdiv->cxo_hz, init_freq);
> +		q_clkdiv->div_factor = div_to_div_factor(div);
> +		if (q_clkdiv->div_factor >= Q_CLKDIV_MAX_ALLOWED)
> +			q_clkdiv->div_factor = Q_CLKDIV_MAX_ALLOWED - 1;
> +		rc = qpnp_clkdiv_config_freq_div(q_clkdiv,
> +				div_factor_to_div(q_clkdiv->div_factor));
> +		if (rc) {
> +			dev_err(dev, "Config initial frequency failed, rc = %d\n",
> +				rc);
> +			return rc;
> +		}
> +	}

Hopefully a bunch of this code goes away.

> +
> +	init = devm_kzalloc(dev, sizeof(*init), GFP_KERNEL);
> +	if (!init)
> +		return -ENOMEM;
> +
> +	rc = of_property_read_u32(of_node, "qcom,clkdiv-id", &id);
> +	if (rc) {
> +		dev_err(dev, "Unable to read clkdiv node id, rc = %d\n", rc);
> +		return rc;
> +	}
> +
> +	clk_name = devm_kcalloc(dev, QPNP_CLKDIV_MAX_NAME_LEN,
> +				sizeof(*clk_name), GFP_KERNEL);
> +	if (!clk_name)
> +		return -ENOMEM;
> +	snprintf(clk_name, QPNP_CLKDIV_MAX_NAME_LEN, "qpnp_clkdiv_%d", id);

devm_kasprintf? Also make sure to free the name after
registration because we copy it over in the framework.

> +
> +	init->name = clk_name;
> +	init->ops = &clk_qpnp_div_ops;
> +	q_clkdiv->hw.init = init;
> +	spin_lock_init(&q_clkdiv->lock);
> +
> +	clk_data = devm_kzalloc(dev, sizeof(*clk_data), GFP_KERNEL);
> +	if (!clk_data)
> +		return -ENOMEM;
> +
> +	clk_data->clks = devm_kzalloc(dev, sizeof(*clk_data->clks), GFP_KERNEL);
> +	if (!clk_data->clks)
> +		return -ENOMEM;
> +
> +	clk = devm_clk_register(dev, &q_clkdiv->hw);
> +	if (IS_ERR(clk)) {
> +		dev_err(dev, "Unable to register qpnp div clock\n");
> +		return PTR_ERR(clk);
> +	}
> +
> +	clk_data->clk_num = 1;
> +	clk_data->clks[0] = clk;
> +
> +	rc = of_clk_add_provider(of_node, of_clk_src_onecell_get, clk_data);

Please use the clk_hw_register() and of_clk_add_hw_provider()
APIs.  Also if we have only one clk it should be
of_clk_hw_simple_get() and have no cells in the binding. But, if
there are multiple of these clks, then it will be onecell.

> +	if (rc) {
> +		dev_err(dev, "Unable to register qpnp div clock provider, rc = %d\n",
> +			rc);
> +		return rc;
> +	}
> +
> +	dev_set_drvdata(dev, q_clkdiv);

Unused? Remove?

> +	dev_info(dev, "Registered %s successfully\n", clk_name);

No noise please.

> +
> +	return rc;
> +}
> +
> +static const struct of_device_id qpnp_clkdiv_match_table[] = {
> +	{ .compatible = "qcom,qpnp-clkdiv" },
> +	{}
> +};

Add a MODULE_DEVICE_TABLE() please.

> +
> +static struct platform_driver qpnp_clkdiv_driver = {
> +	.driver		= {
> +		.name	= "qcom,qpnp-clkdiv",
> +		.of_match_table = qpnp_clkdiv_match_table,
> +	},
> +	.probe		= qpnp_clkdiv_probe,
> +};
> +
> +static int __init qpnp_clkdiv_init(void)
> +{
> +	return platform_driver_register(&qpnp_clkdiv_driver);
> +}
> +module_init(qpnp_clkdiv_init);
> +
> +static void __exit qpnp_clkdiv_exit(void)
> +{
> +	return platform_driver_unregister(&qpnp_clkdiv_driver);
> +}
> +module_exit(qpnp_clkdiv_exit);

Use module_platform_driver() macro.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Co

Re: [PATCH V1] clk: qcom: Add qpnp clock divider support

[Stephen Boyd]

On 07/18, Tirupathi Reddy T wrote:
> 
> On 7/15/2017 2:38 AM, Stephen Boyd wrote:
> >On 07/13, Tirupathi Reddy wrote:
> >>diff --git a/Documentation/devicetree/bindings/clock/clk-qpnp-div.txt b/Documentation/devicetree/bindings/clock/clk-qpnp-div.txt
> >>new file mode 100644
> >>index 0000000..03b7b70
> >>--- /dev/null
> >>+++ b/Documentation/devicetree/bindings/clock/clk-qpnp-div.txt
> >>@@ -0,0 +1,52 @@
> >>+Qualcomm Technologies, Inc. QPNP clock divider (clkdiv)
> >>+
> >>+clkdiv configures the clock frequency of a set of outputs on the PMIC.
> >>+These clocks are typically wired through alternate functions on
> >>+gpio pins.
> >>+
> >>+=======================
> >>+Supported Properties
> >>+=======================
> >>+
> >>+- compatible
> >>+	Usage:      required
> >>+	Value type: <string>
> >>+	Definition: should be "qcom,qpnp-clkdiv".
> >>+
> >>+- reg
> >>+	Usage:      required
> >>+	Value type: <prop-encoded-array>
> >>+	Definition: Addresses and sizes for the memory of this CLKDIV
> >>+		    peripheral.
> >>+
> >>+- qcom,cxo-freq
> >>+	Usage:      required
> >>+	Value type: <u32>
> >>+	Definition: The frequency of the crystal oscillator (CXO) clock in Hz.
> >CXO should be a parent clk then. This could have clocks and
> >clock-names properties for that and then be hooked up to
> >xo_board.
> Sure. I will address in the next patch set.
> >>+
> >>+- qcom,clkdiv-id
> >>+	Usage:      required
> >>+	Value type: <u32>
> >>+	Definition: Integer value specifies the hardware identifier of this
> >>+		    CLKDIV peripheral.
> >This is to name the clk? You could use clock-output-names as
> >that's more standard. But this is also sort of confusing. If
> >there are multiple clkdivs then it would be good to combine them
> >into one device node assuming they're all next to each other.
> >This would be similar to how we handle gpios and regulators. Then
> >the naming is simple enough to be an incrementing number.
> Yes, multiple clkdivs present. We add sub-nodes for each clkdiv and
> parse them inside driver as separate clock.

Please just roll them all into one node instead of a node per
clk on the PMIC.

> >>+#define Q_DIV_PERIOD_NS(cxo_clk, div)	(NSEC_PER_SEC / (cxo_clk / div))
> >>+#define Q_ENABLE_DELAY_NS(cxo_clk, div)	(2 * Q_CXO_PERIOD_NS(cxo_clk) + \
> >>+					(3 * Q_DIV_PERIOD_NS(cxo_clk, div)))
> >>+#define Q_DISABLE_DELAY_NS(cxo_clk, div) \
> >>+					(3 * Q_DIV_PERIOD_NS(cxo_clk, div))
> >>+
> >>+#define CLK_QPNP_DIV_OFFSET		1
> >>+
> >>+enum q_clk_div_factor {
> >>+	Q_CLKDIV_XO_DIV_1_0 = 0,
> >>+	Q_CLKDIV_XO_DIV_1,
> >>+	Q_CLKDIV_XO_DIV_2,
> >>+	Q_CLKDIV_XO_DIV_4,
> >>+	Q_CLKDIV_XO_DIV_8,
> >>+	Q_CLKDIV_XO_DIV_16,
> >>+	Q_CLKDIV_XO_DIV_32,
> >>+	Q_CLKDIV_XO_DIV_64,
> >>+	Q_CLKDIV_MAX_ALLOWED,
> >Please make #defines for these instead of enum.
> We used enum primarily for easy debug at runtime. For an example,
> The "div_factor" field
> of "struct q_clkdiv" would always show the enumerated value which
> would help in
> determining the configured absolute divider value rather than
> spending time in mapping
> register bit values to absolute divider value.

Ok. I can't find a good reference, but typically we don't do this
in kernel drivers and just use #defines instead. Please just do
that. It seems simple enough to know to translate the number to a
power of 2 after reading it.

> >
> >>+};
> >>+
> >>+enum q_clkdiv_state {
> >>+	DISABLE = false,
> >>+	ENABLE = true,
> >>+};
> >Uh no. Just use bool.
> Sure. I will address in the next patch set.
> >
> >>+
> >>+struct q_clkdiv {
> >>+	struct regmap		*regmap;
> >>+	struct device		*dev;
> >>+
> >>+	u16			base;
> >>+	spinlock_t		lock;
> >>+
> >>+	/* clock properties */
> >>+	struct clk_hw		hw;
> >>+	unsigned int		cxo_hz;
> >Drop.
> cxo_hz is required to be populated at driver initialization and
> being used at runtime
> for calculating the div value to be applied.
> >
> >>+	enum q_clk_div_factor	div_factor;
> >>+	bool			enabled;
> >Shouldn't be needed. Read the hardware instead.
> This enabled field is required for the typical handling of set_rate
> in qpnp_clkdiv_config_freq_div().

You can't read the hardware in set_rate op?

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH V1]: clk: qcom: support qpnp clock divider configuration

[Stephen Boyd]

On 07/13, Tirupathi Reddy wrote:
> This patch adds a new device driver for configuring the clkdiv module
> presents on the Qualcomm QPNP PMIC. The driver configures the frequency
> of clkdiv outputs. The driver provides callback functions for different
> clock operations and register the clkdiv module to clock framework.
> 

Please don't send cover letters for single patches.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project