Re: [PATCH] documentation: Fix two-CPU control-dependency example

["Paul E. McKenney" <paulmck@linux.vnet.ibm.com>]

On Thu, Jul 20, 2017 at 09:31:41AM +0800, Boqun Feng wrote:
> On Wed, Jul 19, 2017 at 02:56:02PM -0700, Paul E. McKenney wrote:
> > On Thu, Jul 20, 2017 at 06:33:26AM +0900, Akira Yokosawa wrote:
> > > On 2017/07/20 2:43, Paul E. McKenney wrote:
> > > > On Mon, Jul 17, 2017 at 05:24:42PM +0900, Akira Yokosawa wrote:
> > > >> >From b798b9b631e237d285aa8699da00bfb8ced33bea Mon Sep 17 00:00:00 2001
> > > >> From: Akira Yokosawa <akiyks@gmail.com>
> > > >> Date: Mon, 17 Jul 2017 16:25:33 +0900
> > > >> Subject: [PATCH] documentation: Fix two-CPU control-dependency example
> > > >>
> > > >> In commit 5646f7acc95f ("memory-barriers: Fix control-ordering
> > > >> no-transitivity example"), the operator in "if" statement of
> > > >> the two-CPU example was modified from ">=" to ">".
> > > >> Now the example misses the point because there is no party
> > > >> who will modify "x" nor "y". So each CPU performs only the
> > > >> READ_ONCE().
> > > >>
> > > >> The point of this example is to use control dependency for ordering,
> > > >> and the WRITE_ONCE() should always be executed.
> > > >>
> > > >> So it was correct prior to the above mentioned commit. Partial
> > > >> revert of the commit (with context adjustments regarding other
> > > >> changes thereafter) restores the point.
> > > >>
> > > >> Note that the three-CPU example demonstrating the lack of
> > > >> transitivity stands regardless of this partial revert.
> > > >>
> > > >> Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
> > > > 
> > > > Hello, Akira,
> > > > 
> > > > You are quite right that many compilers would generate straightforward
> > > > code for the code fragment below, and in that case, the assertion could
> > > > never trigger due to either TSO or control dependencies, depending on
> > > > the architecture this was running on.
> > > > 
> > > > However, if the compiler was too smart for our good, it could figure
> > > > out that "x" and "y" only take on the values zero and one, so that
> > > > the "if" would always be taken.  At that point, the compiler could
> > > > simply ignore the "if" with the result shown below.
> > > > 
> > > >> ---
> > > >>  Documentation/memory-barriers.txt | 2 +-
> > > >>  1 file changed, 1 insertion(+), 1 deletion(-)
> > > >>
> > > >> diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt
> > > >> index c4ddfcd..c1ebe99 100644
> > > >> --- a/Documentation/memory-barriers.txt
> > > >> +++ b/Documentation/memory-barriers.txt
> > > >> @@ -851,7 +851,7 @@ demonstrated by two related examples, with the initial values of
> > > >>  	CPU 0                     CPU 1
> > > >>  	=======================   =======================
> > > >>  	r1 = READ_ONCE(x);        r2 = READ_ONCE(y);
> > > >> -	if (r1 > 0)               if (r2 > 0)
> > > >> +	if (r1 >= 0)              if (r2 >= 0)
> > > >>  	  WRITE_ONCE(y, 1);         WRITE_ONCE(x, 1);
> > > >>
> > > >>  	assert(!(r1 == 1 && r2 == 1));
> > > > 
> > > > Original program:
> > > > 
> > > >  	CPU 0                     CPU 1
> > > >  	=======================   =======================
> > > >  	r1 = READ_ONCE(x);        r2 = READ_ONCE(y);
> > > > 	if (r1 >= 0)              if (r2 >= 0)
> > > >  	  WRITE_ONCE(y, 1);         WRITE_ONCE(x, 1);
> > > > 
> > > >  	assert(!(r1 == 1 && r2 == 1));
> > > > 
> > > > Enthusiastically optimized program:
> > > > 
> > > >  	CPU 0                     CPU 1
> > > >  	=======================   =======================
> > > >  	r1 = READ_ONCE(x);        r2 = READ_ONCE(y);
> > > >  	WRITE_ONCE(y, 1);         WRITE_ONCE(x, 1);
> > > > 
> > > >  	assert(!(r1 == 1 && r2 == 1));
> > > > 
> > > > This optimized version could trigger the assertion.
> > > > 
> > > > So we do need to stick with the ">" comparison.
> > > 
> > > Well but,
> > > 
> > > Current example:
> > > 
> > >  	CPU 0                     CPU 1
> > >  	=======================   =======================
> > >  	r1 = READ_ONCE(x);        r2 = READ_ONCE(y);
> > > 	if (r1 > 0)               if (r2 > 0)
> > >  	  WRITE_ONCE(y, 1);         WRITE_ONCE(x, 1);
> > > 
> > > 	assert(!(r1 == 1 && r2 == 1));
> > > 
> > > Such a clever compiler might be able to prove that "x" and "y"
> > > are never modified and end up in the following:
> > > 
> 
> Hi Akira,
> 
> I wouldn't call that compiler a clever one, it's a broken one ;-)
> 
> So here is the thing: READ_ONCE() is a *volatile* load, which means the
> compiler has to generate code that actually does a load, so the values
> of r1 and r2 depend on the loads, therefore, a sane compiler will not 
> optimize the if()s out because the volatile semantics of READ_ONCE().
> Otherwise, I think we have a lot more to worry about than this case.
> 
> > >  	CPU 0                     CPU 1
> > >  	=======================   =======================
> > >  	r1 = READ_ONCE(x);        r2 = READ_ONCE(y);
> > > 
> > > 	assert(!(r1 == 1 && r2 == 1));
> > > 
> > > This means it is impossible to describe this example in C,
> > > doesn't it?
> > 
> > That is a matter of some debate, but it has gotten increasingly more
> > difficult to get C to do one's bidding over the decades.
> > 
> > > What am I missing here?
> > 
> > The compiler has to work harder in your example case, so it is probably
> > just a matter of time.  In the original with ">=", all the compiler needed
> > to do was look at all the assignments and the initial value.  In the
> > original, it also had to do reasoning based on control dependencies
> > (which are not yet part of the C standard).
> > 
> > But yes, the degree to which a compiler can optimize atomics is a matter
> > of some debate.  Here is a proposal to let the developer choose:
> > 
> 
> Hi Paul,
> 
> I know the compiler could optimize atomics in very interesting ways, but
> this case is about volatile, so I guess our case is still fine? ;-)

Hello, Boqun,

When I asked that question, the answer I got was "the compiler must
emit the load instruction, but is under no obligation to actually use the
value loaded".

I don't happen to like that answer, by the way.  ;-)

							Thanx, Paul

> > http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2016/p0062r1.html
> > 
> 
> Great material to wake up mind in the morning! Thanks.
> 
> Regards,
> Boqun
> 
> > What are your thoughts on this?
> > 
> > 							Thanx, Paul
> > 
> > >             Thanks, Akira
> > > 
> > > > That said, I very much welcome critical reviews of memory-barriers.txt,
> > > > so please do feel free to continue doing that!
> > > > 
> > > > 							Thanx, Paul
> > > > 
> > > > 
> > > 
> > 
>