From: Derek Robson <robsonde@gmail.com>
To: gregkh@linuxfoundation.org, robsonde@gmail.com,
linux@Wolf-Entwicklungen.de
Cc: devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org
Subject: [PATCH 2/3] staging: pi433: - style fix, space before tabs
Date: Sat, 22 Jul 2017 15:51:05 +1200 [thread overview]
Message-ID: <20170722035105.27750-1-robsonde@gmail.com> (raw)
Fixed checkpatch errors of "no space before tabs"
Signed-off-by: Derek Robson <robsonde@gmail.com>
---
drivers/staging/pi433/pi433_if.c | 12 ++++++------
drivers/staging/pi433/pi433_if.h | 4 ++--
drivers/staging/pi433/rf69.c | 8 ++++----
drivers/staging/pi433/rf69.h | 6 +++---
4 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/drivers/staging/pi433/pi433_if.c b/drivers/staging/pi433/pi433_if.c
index 9cdebe93657c..b9e9292c01d9 100644
--- a/drivers/staging/pi433/pi433_if.c
+++ b/drivers/staging/pi433/pi433_if.c
@@ -190,12 +190,12 @@ rf69_set_rx_cfg(struct pi433_device *dev, struct pi433_rx_cfg *rx_cfg)
SET_CHECKED(rf69_set_frequency (dev->spi, rx_cfg->frequency));
SET_CHECKED(rf69_set_bit_rate (dev->spi, rx_cfg->bit_rate));
SET_CHECKED(rf69_set_modulation (dev->spi, rx_cfg->modulation));
- SET_CHECKED(rf69_set_antenna_impedance (dev->spi, rx_cfg->antenna_impedance));
- SET_CHECKED(rf69_set_rssi_threshold (dev->spi, rx_cfg->rssi_threshold));
- SET_CHECKED(rf69_set_ook_threshold_dec (dev->spi, rx_cfg->thresholdDecrement));
- SET_CHECKED(rf69_set_bandwidth (dev->spi, rx_cfg->bw_mantisse, rx_cfg->bw_exponent));
+ SET_CHECKED(rf69_set_antenna_impedance(dev->spi, rx_cfg->antenna_impedance));
+ SET_CHECKED(rf69_set_rssi_threshold(dev->spi, rx_cfg->rssi_threshold));
+ SET_CHECKED(rf69_set_ook_threshold_dec(dev->spi, rx_cfg->thresholdDecrement));
+ SET_CHECKED(rf69_set_bandwidth(dev->spi, rx_cfg->bw_mantisse, rx_cfg->bw_exponent));
SET_CHECKED(rf69_set_bandwidth_during_afc(dev->spi, rx_cfg->bw_mantisse, rx_cfg->bw_exponent));
- SET_CHECKED(rf69_set_dagc (dev->spi, rx_cfg->dagc));
+ SET_CHECKED(rf69_set_dagc(dev->spi, rx_cfg->dagc));
dev->rx_bytes_to_drop = rx_cfg->bytes_to_drop;
@@ -959,7 +959,7 @@ static int pi433_release(struct inode *inode, struct file *filp)
static int setup_GPIOs(struct pi433_device *device)
{
- char name[5];
+ char name[5];
int retval;
int i;
diff --git a/drivers/staging/pi433/pi433_if.h b/drivers/staging/pi433/pi433_if.h
index e6ed3cd9b2e2..aae71f029c60 100644
--- a/drivers/staging/pi433/pi433_if.h
+++ b/drivers/staging/pi433/pi433_if.h
@@ -57,7 +57,7 @@
*
* NOTE: struct layout is the same in 64bit and 32bit userspace.
*/
-#define PI433_TX_CFG_IOCTL_NR 0
+#define PI433_TX_CFG_IOCTL_NR 0
struct pi433_tx_cfg
{
__u32 frequency;
@@ -107,7 +107,7 @@ struct pi433_tx_cfg
*
* NOTE: struct layout is the same in 64bit and 32bit userspace.
*/
-#define PI433_RX_CFG_IOCTL_NR 1
+#define PI433_RX_CFG_IOCTL_NR 1
struct pi433_rx_cfg {
__u32 frequency;
__u16 bit_rate;
diff --git a/drivers/staging/pi433/rf69.c b/drivers/staging/pi433/rf69.c
index 7f4db9a1f39a..d931437f0b6a 100644
--- a/drivers/staging/pi433/rf69.c
+++ b/drivers/staging/pi433/rf69.c
@@ -28,8 +28,8 @@
#include "rf69.h"
#include "rf69_registers.h"
-#define F_OSC 32000000 /* in Hz */
-#define FIFO_SIZE 66 /* in byte */
+#define F_OSC 32000000 /* in Hz */
+#define FIFO_SIZE 66 /* in byte */
/*-------------------------------------------------------------------------*/
@@ -885,8 +885,8 @@ int rf69_read_fifo (struct spi_device *spi, u8 *buffer, unsigned int size)
/* prepare a bidirectional transfer */
local_buffer[0] = REG_FIFO;
memset(&transfer, 0, sizeof(transfer));
- transfer.tx_buf = local_buffer;
- transfer.rx_buf = local_buffer;
+ transfer.tx_buf = local_buffer;
+ transfer.rx_buf = local_buffer;
transfer.len = size+1;
retval = spi_sync_transfer(spi, &transfer, 1);
diff --git a/drivers/staging/pi433/rf69.h b/drivers/staging/pi433/rf69.h
index b81e0762032e..373df64b6891 100644
--- a/drivers/staging/pi433/rf69.h
+++ b/drivers/staging/pi433/rf69.h
@@ -20,10 +20,10 @@
#include "rf69_enum.h"
#include "rf69_registers.h"
-#define F_OSC 32000000 /* in Hz */
+#define F_OSC 32000000 /* in Hz */
#define FREQUENCY 433920000 /* in Hz, modifying this value impacts CE certification */
-#define FIFO_SIZE 66 /* in byte */
-#define FIFO_THRESHOLD 15 /* in byte */
+#define FIFO_SIZE 66 /* in byte */
+#define FIFO_THRESHOLD 15 /* in byte */
int rf69_set_mode(struct spi_device *spi, enum mode mode);
int rf69_set_data_mode(struct spi_device *spi, enum dataMode dataMode);
--
2.13.2
next reply other threads:[~2017-07-22 3:51 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-22 3:51 Derek Robson [this message]
2017-07-22 8:48 ` [PATCH 2/3] staging: pi433: - style fix, space before tabs Marcus Wolf
2017-07-24 7:48 ` Dan Carpenter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170722035105.27750-1-robsonde@gmail.com \
--to=robsonde@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@Wolf-Entwicklungen.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox