Re: [PATCH] thunderbolt: icm: Remove Apple check for Alpine Ridge

[Mika Westerberg <mika.westerberg@linux.intel.com>]

On Mon, Aug 07, 2017 at 03:20:40PM +0800, Kai-Heng Feng wrote:
> On Mon, Aug 7, 2017 at 3:02 PM, Mika Westerberg
> <mika.westerberg@linux.intel.com> wrote:
> > On Mon, Aug 07, 2017 at 02:50:49PM +0800, Kai-Heng Feng wrote:
> >> On Mon, Aug 7, 2017 at 12:49 PM, Kai-Heng Feng
> >> <kai.heng.feng@canonical.com> wrote:
> >> > In icm_ar_is_supported(), icm->upstream_port will be uninitialized if
> >> > the hardware is not an Apple one.
> >> >
> >> > The uninitialized icm->upstream_port will later be dereferenced in
> >> > pcie2cio_write(), causes a NULL pointer dereference issue.
> >> >
> >> > Commit f67cf491175a ("thunderbolt: Add support for Internal Connection
> >> > Manager (ICM)") states that all Alpine Ridge will use ICM, so I guess
> >> > it's safe to remove the Apple check.
> >
> > Yes, Alpine Ridge uses ICM but on Apple systems we need to additional
> > steps to get it up and running. That's why the check is there. So no it
> > cannot be removed.
> 
> If that's the case, it probably should be like this:
> 
> diff --git a/drivers/thunderbolt/icm.c b/drivers/thunderbolt/icm.c
> index bdaac1ff00a5..95c255996ff0 100644
> --- a/drivers/thunderbolt/icm.c
> +++ b/drivers/thunderbolt/icm.c
> @@ -888,9 +888,11 @@ static int icm_driver_ready(struct tb *tb)
>         struct icm *icm = tb_priv(tb);
>         int ret;
> 
> -       ret = icm_firmware_init(tb);
> -       if (ret)
> -               return ret;
> +       if (is_apple()) {
> +               ret = icm_firmware_init(tb);
> +               if (ret)
> +                       return ret;
> +       }
> 
>         if (icm->safe_mode) {
>                 tb_info(tb, "Thunderbolt host controller is in safe mode.\n");
> ---
> 
> The uninitialized icm->upstream_port, will be used at here:
> 
> icm_firmware_init()
>   icm_firmware_start()
>     icm_firmware_reset()

At this point we should find out that the ICM is already running and the
function never calls pci2cio_write().

The reason why it is not happening needs to be resolved.

>       pcie2cio_write()
>         pci_write_config_dword(pdev, vnd_cap + PCIE2CIO_WRDATA, data);
> 
> > Is there an actual issue you are trying to solve here?
> 
> Yes, please take a look at [1].
> 
> Although both the patch I sent and the diff above still failed to
> probe the device
> But there are no more NULL pointer dereference.
> 
> [1]  https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1708043/comments/11

I would like to understand what the actual problem is here because in
normal cases we should not end up starting ICM firmware in the first
place.

So no, let's not fix it like this until we know the root cause.

I'll be participating the discussion on the above bug in hopes we could
figure out the root cause.