Re: [PATCH 1/2] staging: typec: tcpm: Validate source and sink caps

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

On Thu, Sep 07, 2017 at 06:22:13PM -0700, Badhri Jagan Sridharan wrote:
> The source and sink caps should follow the following rules.
> This patch validates whether the src_caps/snk_caps adheres
> to it.
> 
> 6.4.1 Capabilities Message
> A Capabilities message (Source Capabilities message or Sink
> Capabilities message) shall have at least one Power
> Data Object for vSafe5V. The Capabilities message shall also
> contain the sending Port’s information followed by up to
> 6 additional Power Data Objects. Power Data Objects in a
> Capabilities message shall be sent in the following order:
> 
> 1. The vSafe5V Fixed Supply Object shall always be the first object.
> 2. The remaining Fixed Supply Objects, if present, shall be sent
>    in voltage order; lowest to highest.
> 3. The Battery Supply Objects, if present shall be sent in Minimum
>    Voltage order; lowest to highest.
> 4. The Variable Supply (non-battery) Objects, if present, shall be
>    sent in Minimum Voltage order; lowest to highest.
> 
> Errors in source/sink_caps of the local port will prevent
> the port registration. Whereas, errors in source caps of partner
> device would only log them.
> 
> Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
> ---
>  drivers/staging/typec/pd.h   |   2 +
>  drivers/staging/typec/tcpm.c | 107 +++++++++++++++++++++++++++++++++++++++----
>  drivers/staging/typec/tcpm.h |  16 +++----
>  3 files changed, 108 insertions(+), 17 deletions(-)

Before you add more stuff to this driver, what is needed to get it out
of staging?  That would be more useful to do now, right?

thanks,

greg k-h