[v5 10/12] soc/fsl/qbman: different register offsets on ARM

Roy Pledge
2017-09-18T20:40:50Z

From: Madalin Bucur <madalin.bucur@nxp.com>

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
---
drivers/soc/fsl/qbman/bman.c | 22 ++++++++++++++++++++++
drivers/soc/fsl/qbman/qman.c | 38 ++++++++++++++++++++++++++++++++++++++
2 files changed, 60 insertions(+)

diff --git a/drivers/soc/fsl/qbman/bman.c b/drivers/soc/fsl/qbman/bman.c
index 5dbb5cc..2e6e682 100644
--- a/drivers/soc/fsl/qbman/bman.c
+++ b/drivers/soc/fsl/qbman/bman.c
@@ -35,6 +35,27 @@

/* Portal register assists */

+#if defined(CONFIG_ARM) || defined(CONFIG_ARM64)
+/* Cache-inhibited register offsets */
+#define BM_REG_RCR_PI_CINH 0x3000
+#define BM_REG_RCR_CI_CINH 0x3100
+#define BM_REG_RCR_ITR 0x3200
+#define BM_REG_CFG 0x3300
+#define BM_REG_SCN(n) (0x3400 + ((n) << 6))
+#define BM_REG_ISR 0x3e00
+#define BM_REG_IER 0x3e40
+#define BM_REG_ISDR 0x3e80
+#define BM_REG_IIR 0x3ec0
+
+/* Cache-enabled register offsets */
+#define BM_CL_CR 0x0000
+#define BM_CL_RR0 0x0100
+#define BM_CL_RR1 0x0140
+#define BM_CL_RCR 0x1000
+#define BM_CL_RCR_PI_CENA 0x3000
+#define BM_CL_RCR_CI_CENA 0x3100
+
+#else
/* Cache-inhibited register offsets */
#define BM_REG_RCR_PI_CINH 0x0000
#define BM_REG_RCR_CI_CINH 0x0004
@@ -53,6 +74,7 @@
#define BM_CL_RCR 0x1000
#define BM_CL_RCR_PI_CENA 0x3000
#define BM_CL_RCR_CI_CENA 0x3100
+#endif

/*
* Portal modes.
diff --git a/drivers/soc/fsl/qbman/qman.c b/drivers/soc/fsl/qbman/qman.c
index 8934c27..7cb7bad 100644
--- a/drivers/soc/fsl/qbman/qman.c
+++ b/drivers/soc/fsl/qbman/qman.c
@@ -41,6 +41,43 @@

/* Portal register assists */

+#if defined(CONFIG_ARM) || defined(CONFIG_ARM64)
+/* Cache-inhibited register offsets */
+#define QM_REG_EQCR_PI_CINH 0x3000
+#define QM_REG_EQCR_CI_CINH 0x3040
+#define QM_REG_EQCR_ITR 0x3080
+#define QM_REG_DQRR_PI_CINH 0x3100
+#define QM_REG_DQRR_CI_CINH 0x3140
+#define QM_REG_DQRR_ITR 0x3180
+#define QM_REG_DQRR_DCAP 0x31C0
+#define QM_REG_DQRR_SDQCR 0x3200
+#define QM_REG_DQRR_VDQCR 0x3240
+#define QM_REG_DQRR_PDQCR 0x3280
+#define QM_REG_MR_PI_CINH 0x3300
+#define QM_REG_MR_CI_CINH 0x3340
+#define QM_REG_MR_ITR 0x3380
+#define QM_REG_CFG 0x3500
+#define QM_REG_ISR 0x3600
+#define QM_REG_IER 0x3640
+#define QM_REG_ISDR 0x3680
+#define QM_REG_IIR 0x36C0
+#define QM_REG_ITPR 0x3740
+
+/* Cache-enabled register offsets */
+#define QM_CL_EQCR 0x0000
+#define QM_CL_DQRR 0x1000
+#define QM_CL_MR 0x2000
+#define QM_CL_EQCR_PI_CENA 0x3000
+#define QM_CL_EQCR_CI_CENA 0x3040
+#define QM_CL_DQRR_PI_CENA 0x3100
+#define QM_CL_DQRR_CI_CENA 0x3140
+#define QM_CL_MR_PI_CENA 0x3300
+#define QM_CL_MR_CI_CENA 0x3340
+#define QM_CL_CR 0x3800
+#define QM_CL_RR0 0x3900
+#define QM_CL_RR1 0x3940
+
+#else
/* Cache-inhibited register offsets */
#define QM_REG_EQCR_PI_CINH 0x0000
#define QM_REG_EQCR_CI_CINH 0x0004
@@ -75,6 +112,7 @@
#define QM_CL_CR 0x3800
#define QM_CL_RR0 0x3900
#define QM_CL_RR1 0x3940
+#endif

/*
* BTW, the drivers (and h/w programming model) already obtain the required
--
2.7.4