From: Mika Westerberg <mika.westerberg@linux.intel.com>
To: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Linus Walleij <linus.walleij@linaro.org>,
linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
Jerome Brunet <jbrunet@baylibre.com>,
chrisjohgorman@gmail.com
Subject: Re: [RFT PATCH v2] gpiolib: allow gpio irqchip to map irqs dynamically
Date: Thu, 28 Sep 2017 11:33:48 +0300 [thread overview]
Message-ID: <20170928083348.GI4630@lahna.fi.intel.com> (raw)
In-Reply-To: <20170721164900.7070-1-grygorii.strashko@ti.com>
On Fri, Jul 21, 2017 at 11:49:00AM -0500, Grygorii Strashko wrote:
> Now IRQ mappings are always created for all (allowed) GPIOs in gpiochip in
> gpiochip_irqchip_add_key() which goes against the idea of SPARSE_IRQ and,
> as result, leads to:
> - increasing of memory consumption for IRQ descriptors most of which will
> never ever be used (espessially on platform with a high number of GPIOs).
> (sizeof(struct irq_desc) == 256 on my tested platforms)
> - imposibility to use GPIO irqchip APIs by gpio drivers when HW implements
> GPIO IRQ functionality as IRQ crossbar/router which has only limited
> number of IRQ outputs (example from [1], all GPIOs can be mapped on only 8
> IRQs).
>
> Hence, remove static IRQ mapping code from gpiochip_irqchip_add_key() and
> instead replace irq_find_mapping() with irq_create_mapping() in
> gpiochip_to_irq(). Also add additional gpiochip_irqchip_irq_valid() calls
> in gpiochip_to_irq() and gpiochip_irq_map().
>
> After this change gpio2irq mapping will happen the following way when GPIO
> irqchip APIs are used by gpio driver:
> - IRQ mappings will be created statically if driver passes first_irq>0
> vlaue in gpiochip_irqchip_add_key().
> - IRQ mappings will be created dynamically from gpio_to_irq() or
> of_irq_get().
>
> Tested on am335x-evm and dra72-evm-revc.
> - dra72-evm-revc: number of created irq mappings decreased from 402 -> 135
> Mem savings 267*256 = 68352 (66kB)
> - am335x-evm: number of created irq mappings decreased from 188 -> 63
> Mem savings 125*256 = 32000 (31kB)
>
> [1] https://lkml.org/lkml/2017/6/15/428
> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Hi Grygorii,
It looks like dc749a09ea5e41 ("gpiolib: allow gpio irqchip to map irqs
dynamically") broke the quirk we added for some Intel Cherryview
systems [1]. Basically after this keyboard of those systems stopped
working again.
Any idea what might be wrong?
I've CC'd Chris Gorman who reported the issue.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=194945
next prev parent reply other threads:[~2017-09-28 8:33 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-21 16:49 [RFT PATCH v2] gpiolib: allow gpio irqchip to map irqs dynamically Grygorii Strashko
2017-08-01 7:52 ` Linus Walleij
2017-08-01 8:03 ` Jerome Brunet
2017-08-01 18:27 ` Grygorii Strashko
2017-09-15 8:26 ` Jerome Brunet
2017-09-21 11:41 ` Linus Walleij
2017-10-05 10:59 ` Marc Zyngier
2017-08-01 9:53 ` Bartosz Golaszewski
2017-09-28 8:33 ` Mika Westerberg [this message]
2017-09-28 14:02 ` Grygorii Strashko
2017-09-28 14:26 ` Mika Westerberg
2017-10-08 0:27 ` Linus Walleij
2017-10-09 18:10 ` Grygorii Strashko
2017-10-09 19:57 ` Linus Walleij
2017-10-09 22:17 ` Grygorii Strashko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170928083348.GI4630@lahna.fi.intel.com \
--to=mika.westerberg@linux.intel.com \
--cc=chrisjohgorman@gmail.com \
--cc=grygorii.strashko@ti.com \
--cc=jbrunet@baylibre.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox