Re: [PATCH v6 2/2] iio:dac: Add DT binding documentation for ds4424

[Jonathan Cameron <jic23@kernel.org>]

On Fri, 22 Sep 2017 13:12:09 -0700
"Ismail H. Kose" <Ismail.Kose@maximintegrated.com> wrote:

> Signed-off-by: Ismail H. Kose <ihkose@gmail.com>
> Signed-off-by: Ismail H. Kose <Ismail.Kose@maximintegrated.com>

Direct at Rob Herring...

Rob, this is now a very standard binding so I'm going to
take it into my testing tree.  If you have a chance to take a last
look at it though that would be great.

For everyone else: 

Applied to the togreg branch of iio.git and pushed out as testing
for the autobuilders to play with it.

Thanks,

Jonathan
> ---
> v6:
> 	* Removed reference resistors property
> 	* Fixed regulator property
> v3:
> 	* Removed iio-map
> v2:
> 	* Removed min/max rfs, ifs-scale, etc values
> 
>  Documentation/devicetree/bindings/iio/dac/ds4424.txt | 20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/dac/ds4424.txt
> 
> diff --git a/Documentation/devicetree/bindings/iio/dac/ds4424.txt b/Documentation/devicetree/bindings/iio/dac/ds4424.txt
> new file mode 100644
> index 000000000000..eaebbf8dab40
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/dac/ds4424.txt
> @@ -0,0 +1,20 @@
> +Maxim Integrated DS4422/DS4424 7-bit Sink/Source Current DAC Device Driver
> +
> +Datasheet publicly available at:
> +https://datasheets.maximintegrated.com/en/ds/DS4422-DS4424.pdf
> +
> +Required properties:
> +	- compatible: Should be one of
> +		maxim,ds4422
> +		maxim,ds4424
> +	- reg: Should contain the DAC I2C address
> +
> +Optional properties:
> +	- vcc-supply: Power supply is optional. If not defined, driver will ignore it.
> +
> +Example:
> +	ds4224@10 {
> +		compatible = "maxim,ds4424";
> +		reg = <0x10>; /* When A0, A1 pins are ground */
> +		vcc-supply = <&vcc_3v3>;
> +	};