From: James Hogan <james.hogan@imgtec.com>
To: Ed Blake <ed.blake@sondrel.com>
Cc: <tglx@linutronix.de>, <jason@lakedaemon.net>,
<marc.zyngier@arm.com>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 4/4] irqchip: imgpdc: Pass on peripheral mask/unmasks to the parent
Date: Wed, 4 Oct 2017 15:03:02 +0100 [thread overview]
Message-ID: <20171004140302.GG25320@jhogan-linux.le.imgtec.org> (raw)
In-Reply-To: <1506938159-466-5-git-send-email-ed.blake@sondrel.com>
[-- Attachment #1: Type: text/plain, Size: 2923 bytes --]
Hi Ed,
On Mon, Oct 02, 2017 at 10:55:59AM +0100, Ed Blake wrote:
>
> Pass on peripheral (RTC/IR/WD) irq masks and unmasks to the parent
> interrupt controller, as well as setting / clearing the relevant bits
> in the IRQ_ROUTE register.
>
> Clearing bits in the IRQ_ROUTE register will prevent future interrupts
> from being passed on to the parent, but won't mask an existing
> interrupt which has already made it to the parent.
Is it an edge or level sensitive interrupt from the PDC?
I'm a little rusty on the IRQ subsystem TBH, but if edge sensitive I
would have expected the parent interrupt to be acked/cleared by the
parent handler.
And if level sensitive I would have expected the deasserted parent
interrupt to be masked by the parent handler, and immediately cleared
upon rerouting.
Maybe you can clarify whats going on here.
Cheers
James
> This is currently
> causing peipheral interrupts to fire continuously when the system wakes
> from a suspended state when one of the peripherals is used to wake the
> system (e.g. RTC, IR). The interrupt occurs early in the wake process
> (still in the noirq phase) and because the peripheral interrupt is
> disabled at that point, the core marks it as pending and masks it out.
> This mask must be passed to the parent controller to be effective.
>
> Signed-off-by: Ed Blake <ed.blake@sondrel.com>
> ---
> drivers/irqchip/irq-imgpdc.c | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/drivers/irqchip/irq-imgpdc.c b/drivers/irqchip/irq-imgpdc.c
> index d1bcfef..05c48dd 100644
> --- a/drivers/irqchip/irq-imgpdc.c
> +++ b/drivers/irqchip/irq-imgpdc.c
> @@ -141,21 +141,31 @@ static struct pdc_intc_priv *irqd_to_priv(struct irq_data *data)
> static void perip_irq_mask(struct irq_data *data)
> {
> struct pdc_intc_priv *priv = irqd_to_priv(data);
> + unsigned int parent_irq = priv->perip_irqs[data->hwirq];
> + struct irq_data *parent_irq_data = irq_get_irq_data(parent_irq);
>
> raw_spin_lock(&priv->lock);
> priv->irq_route &= ~data->mask;
> pdc_write(priv, PDC_IRQ_ROUTE, priv->irq_route);
> raw_spin_unlock(&priv->lock);
> +
> + /* Pass on the mask to the parent */
> + parent_irq_data->chip->irq_mask(parent_irq_data);
> }
>
> static void perip_irq_unmask(struct irq_data *data)
> {
> struct pdc_intc_priv *priv = irqd_to_priv(data);
> + unsigned int parent_irq = priv->perip_irqs[data->hwirq];
> + struct irq_data *parent_irq_data = irq_get_irq_data(parent_irq);
>
> raw_spin_lock(&priv->lock);
> priv->irq_route |= data->mask;
> pdc_write(priv, PDC_IRQ_ROUTE, priv->irq_route);
> raw_spin_unlock(&priv->lock);
> +
> + /* Pass on the unmask to the parent */
> + parent_irq_data->chip->irq_unmask(parent_irq_data);
> }
>
> static int syswake_irq_set_type(struct irq_data *data, unsigned int flow_type)
> --
> 1.9.1
>
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2017-10-04 14:03 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-02 9:55 [PATCH 0/4] irqchip: imgpdc: Fix various issues Ed Blake
2017-10-02 9:55 ` [PATCH 1/4] irqchip: imgpdc: Avoid unbalanced irq wake disable Ed Blake
2017-10-02 9:55 ` [PATCH 2/4] irqchip: imgpdc: Avoid immediate wake event during set_wake Ed Blake
2017-10-02 9:55 ` [PATCH 3/4] irqchip: imgpdc: Set sys wake polarities to active high Ed Blake
2017-10-04 13:14 ` James Hogan
2017-10-05 14:37 ` Ed Blake
2017-10-02 9:55 ` [PATCH 4/4] irqchip: imgpdc: Pass on peripheral mask/unmasks to the parent Ed Blake
2017-10-04 14:03 ` James Hogan [this message]
2017-10-05 14:48 ` Ed Blake
2017-10-05 15:26 ` James Hogan
2017-10-05 15:43 ` Ed Blake
2017-10-05 16:42 ` Ed Blake
2017-10-03 20:32 ` [PATCH 0/4] irqchip: imgpdc: Fix various issues Thomas Gleixner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171004140302.GG25320@jhogan-linux.le.imgtec.org \
--to=james.hogan@imgtec.com \
--cc=ed.blake@sondrel.com \
--cc=jason@lakedaemon.net \
--cc=linux-kernel@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox