From: Bin Liu <b-liu@ti.com>
To: Jonathan Liu <net147@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Maxime Ripard <maxime.ripard@free-electrons.com>,
Chen-Yu Tsai <wens@csie.org>, <linux-usb@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <linux-sunxi@googlegroups.com>
Subject: Re: [PATCH] usb: musb: Check for host-mode using is_host_active() on reset interrupt
Date: Mon, 9 Oct 2017 11:03:43 -0500 [thread overview]
Message-ID: <20171009160343.GC32614@uda0271908> (raw)
In-Reply-To: <20170927103522.30202-1-net147@gmail.com>
Hi,
On Wed, Sep 27, 2017 at 08:35:22PM +1000, Jonathan Liu wrote:
> The sunxi musb has a bug where sometimes it will generate a babble
> error on device disconnect instead of a disconnect IRQ. When this
> happens the musb controller switches from host mode to device mode
> (it clears MUSB_DEVCTL_HM/MUSB_DEVCTL_SESSION and sets
> MUSB_DEVCTL_BDEVICE) and gets stuck in this state.
>
> The babble error is misdetected as a bus reset because MUSB_DEVCTL_HM
> was cleared.
>
> To fix this, use is_host_active() rather than (devctl & MUSB_DEVCTL_HM)
> to detect babble error so that sunxi musb babble recovery can handle it
> by restoring the mode. This information is provided by the driver logic
> and does not rely on register contents.
>
> Cc: stable@vger.kernel.org # v4.1+
> Signed-off-by: Jonathan Liu <net147@gmail.com>
Applied. Thanks.
-Bin.
prev parent reply other threads:[~2017-10-09 16:04 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-27 10:35 [PATCH] usb: musb: Check for host-mode using is_host_active() on reset interrupt Jonathan Liu
2017-10-09 16:03 ` Bin Liu [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171009160343.GC32614@uda0271908 \
--to=b-liu@ti.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=linux-usb@vger.kernel.org \
--cc=maxime.ripard@free-electrons.com \
--cc=net147@gmail.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox