From: Kees Cook <keescook@chromium.org>
To: Jens Axboe <axboe@kernel.dk>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>,
Alex Dubov <oakad@yahoo.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH] drivers/memstick: Convert timers to use timer_setup()
Date: Tue, 24 Oct 2017 03:17:35 -0700 [thread overview]
Message-ID: <20171024101735.GA69384@beast> (raw)
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
---
drivers/memstick/host/jmb38x_ms.c | 10 ++++++----
drivers/memstick/host/r592.c | 7 +++----
drivers/memstick/host/tifm_ms.c | 6 +++---
3 files changed, 12 insertions(+), 11 deletions(-)
diff --git a/drivers/memstick/host/jmb38x_ms.c b/drivers/memstick/host/jmb38x_ms.c
index 48db922075e2..bcdca9fbef51 100644
--- a/drivers/memstick/host/jmb38x_ms.c
+++ b/drivers/memstick/host/jmb38x_ms.c
@@ -59,6 +59,7 @@ struct jmb38x_ms_host {
unsigned int block_pos;
unsigned long timeout_jiffies;
struct timer_list timer;
+ struct memstick_host *msh;
struct memstick_request *req;
unsigned char cmd_flags;
unsigned char io_pos;
@@ -592,10 +593,10 @@ static irqreturn_t jmb38x_ms_isr(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static void jmb38x_ms_abort(unsigned long data)
+static void jmb38x_ms_abort(struct timer_list *t)
{
- struct memstick_host *msh = (struct memstick_host *)data;
- struct jmb38x_ms_host *host = memstick_priv(msh);
+ struct jmb38x_ms_host *host = from_timer(host, t, timer);
+ struct memstick_host *msh = host->msh;
unsigned long flags;
dev_dbg(&host->chip->pdev->dev, "abort\n");
@@ -878,6 +879,7 @@ static struct memstick_host *jmb38x_ms_alloc_host(struct jmb38x_ms *jm, int cnt)
return NULL;
host = memstick_priv(msh);
+ host->msh = msh;
host->chip = jm;
host->addr = ioremap(pci_resource_start(jm->pdev, cnt),
pci_resource_len(jm->pdev, cnt));
@@ -897,7 +899,7 @@ static struct memstick_host *jmb38x_ms_alloc_host(struct jmb38x_ms *jm, int cnt)
msh->caps = MEMSTICK_CAP_PAR4 | MEMSTICK_CAP_PAR8;
- setup_timer(&host->timer, jmb38x_ms_abort, (unsigned long)msh);
+ timer_setup(&host->timer, jmb38x_ms_abort, 0);
if (!request_irq(host->irq, jmb38x_ms_isr, IRQF_SHARED, host->host_id,
msh))
diff --git a/drivers/memstick/host/r592.c b/drivers/memstick/host/r592.c
index d5cfb503b9d6..627d6e62fe31 100644
--- a/drivers/memstick/host/r592.c
+++ b/drivers/memstick/host/r592.c
@@ -616,9 +616,9 @@ static void r592_update_card_detect(struct r592_device *dev)
}
/* Timer routine that fires 1 second after last card detection event, */
-static void r592_detect_timer(long unsigned int data)
+static void r592_detect_timer(struct timer_list *t)
{
- struct r592_device *dev = (struct r592_device *)data;
+ struct r592_device *dev = from_timer(dev, t, detect_timer);
r592_update_card_detect(dev);
memstick_detect_change(dev->host);
}
@@ -770,8 +770,7 @@ static int r592_probe(struct pci_dev *pdev, const struct pci_device_id *id)
spin_lock_init(&dev->io_thread_lock);
init_completion(&dev->dma_done);
INIT_KFIFO(dev->pio_fifo);
- setup_timer(&dev->detect_timer,
- r592_detect_timer, (long unsigned int)dev);
+ timer_setup(&dev->detect_timer, r592_detect_timer, 0);
/* Host initialization */
host->caps = MEMSTICK_CAP_PAR4;
diff --git a/drivers/memstick/host/tifm_ms.c b/drivers/memstick/host/tifm_ms.c
index 7bafa72f8f57..bed205849d02 100644
--- a/drivers/memstick/host/tifm_ms.c
+++ b/drivers/memstick/host/tifm_ms.c
@@ -538,9 +538,9 @@ static int tifm_ms_set_param(struct memstick_host *msh,
return 0;
}
-static void tifm_ms_abort(unsigned long data)
+static void tifm_ms_abort(struct timer_list *t)
{
- struct tifm_ms *host = (struct tifm_ms *)data;
+ struct tifm_ms *host = from_timer(host, t, timer);
dev_dbg(&host->dev->dev, "status %x\n",
readl(host->dev->addr + SOCK_MS_STATUS));
@@ -575,7 +575,7 @@ static int tifm_ms_probe(struct tifm_dev *sock)
host->dev = sock;
host->timeout_jiffies = msecs_to_jiffies(1000);
- setup_timer(&host->timer, tifm_ms_abort, (unsigned long)host);
+ timer_setup(&host->timer, tifm_ms_abort, 0);
tasklet_init(&host->notify, tifm_ms_req_tasklet, (unsigned long)msh);
msh->request = tifm_ms_submit_req;
--
2.7.4
--
Kees Cook
Pixel Security
reply other threads:[~2017-10-24 10:17 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171024101735.GA69384@beast \
--to=keescook@chromium.org \
--cc=axboe@kernel.dk \
--cc=linux-kernel@vger.kernel.org \
--cc=maximlevitsky@gmail.com \
--cc=oakad@yahoo.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox