[PATCH 1/2] musb: remove unused frame variable

[PATCH 1/2] musb: remove unused frame variable

[Corentin Labbe]

This patch fix the following warning
drivers/usb/musb/musb_host.c:223:8: warning: variable 'frame' set but not used [-Wunused-but-set-variable]
by remove the frame variable in musb_start_urb().

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
---
 drivers/usb/musb/musb_host.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 2627363fb4fe..aa573ab99384 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -195,7 +195,6 @@ static struct musb_qh *musb_ep_get_qh(struct musb_hw_ep *ep, int is_in)
 static void
 musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
 {
-	u16			frame;
 	u32			len;
 	void __iomem		*mbase =  musb->mregs;
 	struct urb		*urb = next_urb(qh);
@@ -244,7 +243,6 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
 	case USB_ENDPOINT_XFER_ISOC:
 	case USB_ENDPOINT_XFER_INT:
 		musb_dbg(musb, "check whether there's still time for periodic Tx");
-		frame = musb_readw(mbase, MUSB_FRAME);
 		/* FIXME this doesn't implement that scheduling policy ...
 		 * or handle framecounter wrapping
 		 */
-- 
2.13.6

[PATCH 2/2] musb: remove unused pipe variable

[Corentin Labbe]

This patch fix the following build warning:
drivers/usb/musb/musb_host.c:1809:8: warning: variable 'pipe' set but not used [-Wunused-but-set-variable]
by removing the pipe variable in musb_host_rx()

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
---
 drivers/usb/musb/musb_host.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index aa573ab99384..394b4ac86161 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -1779,7 +1779,6 @@ void musb_host_rx(struct musb *musb, u8 epnum)
 	struct musb_qh		*qh = hw_ep->in_qh;
 	size_t			xfer_len;
 	void __iomem		*mbase = musb->mregs;
-	int			pipe;
 	u16			rx_csr, val;
 	bool			iso_err = false;
 	bool			done = false;
@@ -1808,8 +1807,6 @@ void musb_host_rx(struct musb *musb, u8 epnum)
 		return;
 	}
 
-	pipe = urb->pipe;
-
 	trace_musb_urb_rx(musb, urb);
 
 	/* check for errors, concurrent stall & unlink is not really
-- 
2.13.6

Re: [PATCH 1/2] musb: remove unused frame variable

[Bin Liu]

Hi,

On Wed, Nov 15, 2017 at 07:20:34PM +0000, Corentin Labbe wrote:
> This patch fix the following warning
> drivers/usb/musb/musb_host.c:223:8: warning: variable 'frame' set but not used [-Wunused-but-set-variable]
> by remove the frame variable in musb_start_urb().
> 
> Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
> ---
>  drivers/usb/musb/musb_host.c | 2 --
>  1 file changed, 2 deletions(-)

Applied. it will be pushed out for v4.16-rc1.

Thanks,
-Bin.

Re: [PATCH 2/2] musb: remove unused pipe variable

[Bin Liu]

Hi,

On Wed, Nov 15, 2017 at 07:20:35PM +0000, Corentin Labbe wrote:
> This patch fix the following build warning:
> drivers/usb/musb/musb_host.c:1809:8: warning: variable 'pipe' set but not used [-Wunused-but-set-variable]
> by removing the pipe variable in musb_host_rx()
> 
> Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
> ---
>  drivers/usb/musb/musb_host.c | 3 ---
>  1 file changed, 3 deletions(-)

Applied. It will be pushed out for v4.16-rc1.

Thanks,
-Bin.