From: Guenter Roeck <linux@roeck-us.net>
To: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org, Ralf Baechle <ralf@linux-mips.org>,
linux-kernel@vger.kernel.org
Subject: Re: [22/26] MIPS: generic: Introduce generic DT-based board support
Date: Sat, 18 Nov 2017 19:43:25 -0800 [thread overview]
Message-ID: <20171119034325.GA17384@roeck-us.net> (raw)
In-Reply-To: <20160826153725.11629-23-paul.burton@imgtec.com>
On Fri, Aug 26, 2016 at 04:37:21PM +0100, Paul Burton wrote:
> Introduce a "generic" platform, which aims to be board-agnostic by
> making use of device trees passed by the boot protocol defined in the
> MIPS UHI (Universal Hosting Interface) specification. Provision is made
> for supporting boards which use a legacy boot protocol that can't be
> changed, but adding support for such boards or any others is left to
> followon patches.
>
> Right now the built kernels expect to be loaded to 0x80100000, ie. in
> kseg0. This is fine for the vast majority of MIPS platforms, but
> nevertheless it would be good to remove this limitation in the future by
> mapping the kernel via the TLB such that it can be loaded anywhere & map
> itself appropriately.
>
> Configuration is handled by dynamically generating configs using
> scripts/kconfig/merge_config.sh, somewhat similar to the way powerpc
> makes use of it. This allows for variations upon the configuration, eg.
> differing architecture revisions or subsets of driver support for
> differing boards, to be handled without having a large number of
> defconfig files.
>
> Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Guess it is known that this patch causes failures when building
"allmodconfig" on test systems such as 0day; it was reported by 0day
some two months ago. nevertheless, the patch found its way into mainline
without fix. Does anyone care, or should I simply disable "allmodconfig"
test builds for mips ?
Guenter
next prev parent reply other threads:[~2017-11-19 3:43 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-26 15:36 [PATCH 00/26] MIPS generic kernels, SEAD-3 & Boston support Paul Burton
2016-08-26 15:37 ` [PATCH 01/26] MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERIC Paul Burton
2016-08-26 15:37 ` [PATCH 02/26] MIPS: PCI: Make pcibios_set_cache_line_size an initcall Paul Burton
2016-08-26 15:37 ` [PATCH 03/26] MIPS: PCI: Inline pcibios_assign_all_busses Paul Burton
2016-08-26 15:37 ` [PATCH 04/26] MIPS: PCI: Split pci.c into pci.c & pci-legacy.c Paul Burton
2016-08-26 15:37 ` [PATCH 05/26] MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY Paul Burton
2016-08-26 15:37 ` [PATCH 06/26] MIPS: PCI: Support generic drivers Paul Burton
2016-08-26 15:37 ` [PATCH 07/26] MIPS: Sanitise coherentio semantics Paul Burton
2016-08-26 15:37 ` [PATCH 08/26] MIPS: dma-default: Don't check hw_coherentio if device is non-coherent Paul Burton
2016-08-26 15:37 ` [PATCH 09/26] MIPS: Support per-device DMA coherence Paul Burton
2016-08-26 15:37 ` [PATCH 10/26] MIPS: Print CM error reports upon bus errors Paul Burton
2016-08-26 15:37 ` [PATCH 11/26] dt-bindings: Document mti,mips-cpc binding Paul Burton
2016-09-02 12:34 ` Rob Herring
2016-09-02 13:59 ` Paul Burton
2016-08-26 15:37 ` [PATCH 12/26] MIPS: CPC: Provide a default mips_cpc_default_phys_base Paul Burton
2016-08-26 15:37 ` [PATCH 13/26] dt-bindings: Document mti,mips-cdmm binding Paul Burton
2016-09-02 12:38 ` Rob Herring
2016-08-26 15:37 ` [PATCH 14/26] MIPS: CDMM: Allow CDMM base address to be specified via DT Paul Burton
2016-08-26 15:37 ` [PATCH 15/26] irqchip: mips-cpu: Replace magic 0x100 with IE_SW0 Paul Burton
2016-08-26 15:37 ` [PATCH 16/26] irqchip: mips-cpu: Prepare for non-legacy IRQ domains Paul Burton
2016-08-26 15:37 ` [PATCH 17/26] irqchip: mips-cpu: Introduce IPI IRQ domain support Paul Burton
2016-08-26 15:37 ` [PATCH 18/26] MIPS: smp-mt: Use CPU interrupt controller " Paul Burton
2016-08-26 15:37 ` [PATCH 19/26] MIPS: Stengthen IPI IRQ domain sanity check Paul Burton
2016-08-26 15:37 ` [PATCH 20/26] MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0 Paul Burton
2016-08-26 15:37 ` [PATCH 21/26] MIPS: Support generating Flattened Image Trees (.itb) Paul Burton
2016-08-26 15:37 ` [PATCH 22/26] MIPS: generic: Introduce generic DT-based board support Paul Burton
2017-11-19 3:43 ` Guenter Roeck [this message]
2017-11-20 10:25 ` [22/26] " James Hogan
2017-11-20 14:03 ` Guenter Roeck
2017-11-21 0:02 ` [PATCH] MIPS: Fix CPS SMP NS16550 UART defaults James Hogan
2017-11-21 3:32 ` Guenter Roeck
2017-12-25 17:43 ` Guenter Roeck
2016-08-26 15:37 ` [PATCH 23/26] MIPS: generic: Convert SEAD-3 to a generic board Paul Burton
2016-08-26 15:37 ` [PATCH 24/26] dt-bindings: Document img,boston-clock binding Paul Burton
2016-08-26 17:44 ` Stephen Boyd
2016-08-30 15:53 ` Paul Burton
2016-09-02 12:54 ` Rob Herring
2016-09-02 13:33 ` Paul Burton
2016-08-26 15:37 ` [PATCH 25/26] clk: boston: Add a driver for MIPS Boston board clocks Paul Burton
2016-08-26 17:41 ` Stephen Boyd
2016-08-30 15:06 ` Paul Burton
2016-08-26 15:37 ` [PATCH 26/26] MIPS: generic: Support MIPS Boston development boards Paul Burton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171119034325.GA17384@roeck-us.net \
--to=linux@roeck-us.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=paul.burton@imgtec.com \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox