From: "Andrew F. Davis" <afd@ti.com>
To: Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>
Cc: <alsa-devel@alsa-project.org>, <linux-kernel@vger.kernel.org>,
"Andrew F . Davis" <afd@ti.com>
Subject: [PATCH v3 10/10] ASoC: tlv320aic31xx: Add button press detection
Date: Thu, 7 Dec 2017 09:39:00 -0600 [thread overview]
Message-ID: <20171207153900.9831-11-afd@ti.com> (raw)
In-Reply-To: <20171207153900.9831-1-afd@ti.com>
This device can optionally detect headset or microphone button presses.
Add support for this by passing this event to the jack layer.
Signed-off-by: Andrew F. Davis <afd@ti.com>
---
sound/soc/codecs/tlv320aic31xx.c | 14 +++++++++++++-
sound/soc/codecs/tlv320aic31xx.h | 3 ++-
2 files changed, 15 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/tlv320aic31xx.c b/sound/soc/codecs/tlv320aic31xx.c
index fef402e0f9e8..8f5dec414628 100644
--- a/sound/soc/codecs/tlv320aic31xx.c
+++ b/sound/soc/codecs/tlv320aic31xx.c
@@ -1290,9 +1290,20 @@ static irqreturn_t aic31xx_irq(int irq, void *data)
if (value & AIC31XX_HPRSCDETECT)
dev_err(dev, "Short circuit on Right output is detected\n");
- if (value & AIC31XX_HSPLUG) {
+ if (value & (AIC31XX_HSPLUG | AIC31XX_BUTTONPRESS)) {
int status = 0;
+ ret = regmap_read(aic31xx->regmap, AIC31XX_INTRDACFLAG2,
+ &value);
+ if (ret) {
+ dev_err(dev, "Failed to read interrupt mask: %d\n",
+ ret);
+ return IRQ_NONE;
+ }
+
+ if (value & AIC31XX_BUTTONPRESS)
+ status |= SND_JACK_BTN_0;
+
ret = regmap_read(aic31xx->regmap, AIC31XX_HSDETECT, &value);
if (ret) {
dev_err(dev, "Failed to read headset type: %d\n", ret);
@@ -1405,6 +1416,7 @@ static int aic31xx_i2c_probe(struct i2c_client *i2c,
regmap_write(aic31xx->regmap, AIC31XX_INT1CTRL,
AIC31XX_HSPLUGDET |
+ AIC31XX_BUTTONPRESSDET |
AIC31XX_SC |
AIC31XX_ENGINE);
diff --git a/sound/soc/codecs/tlv320aic31xx.h b/sound/soc/codecs/tlv320aic31xx.h
index 66c85df4d5be..7fce278eadac 100644
--- a/sound/soc/codecs/tlv320aic31xx.h
+++ b/sound/soc/codecs/tlv320aic31xx.h
@@ -21,7 +21,8 @@
#define DAC31XX_BIT BIT(3)
#define AIC31XX_JACK_MASK (SND_JACK_HEADPHONE | \
- SND_JACK_HEADSET)
+ SND_JACK_HEADSET | \
+ SND_JACK_BTN_0)
enum aic31xx_type {
AIC3100 = 0,
--
2.15.0
prev parent reply other threads:[~2017-12-07 15:39 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-07 15:38 [PATCH v3 00/10] Add Headphone Detection to TLV320AIC31xx Driver Andrew F. Davis
2017-12-07 15:38 ` [PATCH v3 01/10] ASoC: tlv320aic31xx: Fix GPIO header includes Andrew F. Davis
2017-12-07 15:38 ` [PATCH v3 02/10] ASoC: tlv320aic31xx: Use fwnode APIs over raw OF calls Andrew F. Davis
2017-12-07 15:38 ` [PATCH v3 03/10] ASoC: tlv320aic31xx: Remove platform data Andrew F. Davis
2017-12-07 15:38 ` [PATCH v3 04/10] ASoC: tlv320aic31xx: Add MICBIAS off setting Andrew F. Davis
2017-12-07 15:38 ` [PATCH v3 05/10] ASoC: tlv320aic31xx: Remove regulator notification handling Andrew F. Davis
2017-12-07 15:38 ` [PATCH v3 06/10] ASoC: tlv320aic31xx: Reset registers during power up Andrew F. Davis
2017-12-07 15:38 ` [PATCH v3 07/10] ASoC: tlv320aic31xx: Add short circuit detection support Andrew F. Davis
2017-12-07 15:38 ` [PATCH v3 08/10] ASoC: tlv320aic31xx: Add overflow " Andrew F. Davis
2017-12-07 15:38 ` [PATCH v3 09/10] ASoC: tlv320aic31xx: Add headphone/headset detection Andrew F. Davis
2017-12-07 15:39 ` Andrew F. Davis [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171207153900.9831-11-afd@ti.com \
--to=afd@ti.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox