[PATCH] mips: dts: Remove leading 0x and 0s from bindings notation

[Mathieu Malaterre <malat@debian.org>]

Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:

Warning (unit_address_format): Node /XXX unit name should not have leading "0x"

and

Warning (unit_address_format): Node /XXX unit name should not have leading 0s

Converted using the following command:

find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -E -i -e "s/@0x([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" -e "s/@0+([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" {} +

For simplicity, two sed expressions were used to solve each warnings separately.

To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:

https://elinux.org/Device_Tree_Linux#Linux_conventions

This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")

Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
---
 arch/mips/boot/dts/img/boston.dts   | 2 +-
 arch/mips/boot/dts/ingenic/ci20.dts | 8 ++++----
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/mips/boot/dts/img/boston.dts b/arch/mips/boot/dts/img/boston.dts
index 2cd49b60e030..1bd105428f61 100644
--- a/arch/mips/boot/dts/img/boston.dts
+++ b/arch/mips/boot/dts/img/boston.dts
@@ -157,7 +157,7 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					rtc@0x68 {
+					rtc@68 {
 						compatible = "st,m41t81s";
 						reg = <0x68>;
 					};
diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
index a4cc52214dbd..7d5e49e40b0d 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -110,22 +110,22 @@
 					reg = <0x0 0x0 0x0 0x800000>;
 				};
 
-				partition@0x800000 {
+				partition@800000 {
 					label = "u-boot";
 					reg = <0x0 0x800000 0x0 0x200000>;
 				};
 
-				partition@0xa00000 {
+				partition@a00000 {
 					label = "u-boot-env";
 					reg = <0x0 0xa00000 0x0 0x200000>;
 				};
 
-				partition@0xc00000 {
+				partition@c00000 {
 					label = "boot";
 					reg = <0x0 0xc00000 0x0 0x4000000>;
 				};
 
-				partition@0x8c00000 {
+				partition@8c00000 {
 					label = "system";
 					reg = <0x0 0x4c00000 0x1 0xfb400000>;
 				};
-- 
2.11.0