public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: Enric Balletbo Serra <eballetbo@gmail.com>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>,
	Alessandro Zummo <a.zummo@towertech.it>,
	linux-rtc@vger.kernel.org,
	linux-kernel <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] rtc: ds1307: call the platform's logic for handle IRQs.
Date: Fri, 15 Dec 2017 14:04:25 +0100	[thread overview]
Message-ID: <20171215130425.GA7022@piout.net> (raw)
In-Reply-To: <CAFqH_52KKH3r+TzgvP3NvPjuFpQJwCZAmj2ZVkcYLdy9qaXLuQ@mail.gmail.com>

Hi,

On 15/12/2017 at 12:44:49 +0100, Enric Balletbo Serra wrote:
> Hi,
> 
> 2017-08-24 12:30 GMT+02:00 Enric Balletbo i Serra
> <enric.balletbo@collabora.com>:
> > On some systems the nIRQ pin is often connect to a GPIO, then, if a given
> > interrupt line is supposed to wake up the system, the corresponding input
> > of that interrupt controller need to be enabled to receive signal from the
> > line in question. Before this commit such systems would not wake up
> > because are not marked as wakeup IRQs in the IRQ subsystem.
> >
> > This commit calls enable_irq_wake() on suspend and disables that input to
> > prevent the dedicated controller from triggering interrupts unnecessarily
> > after wakeup.
> >
> > After this commit a system composed by a RTC DS1339 chip connected to a
> > GPIO line on a AM335x SoC is able to wakeup from suspend-to-RAM, otherwise
> > the line is ignored.
> >
> > Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> > ---
> >  drivers/rtc/rtc-ds1307.c | 25 +++++++++++++++++++++++++
> >  1 file changed, 25 insertions(+)
> >
> > diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
> > index 4b43aa6..c4b0f6a 100644
> > --- a/drivers/rtc/rtc-ds1307.c
> > +++ b/drivers/rtc/rtc-ds1307.c
> > @@ -1711,11 +1711,36 @@ static int ds1307_probe(struct i2c_client *client,
> >         return err;
> >  }
> >
> > +#ifdef CONFIG_PM_SLEEP
> > +static int ds1307_suspend(struct device *dev)
> > +{
> > +       struct ds1307 *ds1307 = dev_get_drvdata(dev);
> > +
> > +       if (device_may_wakeup(dev))
> > +               enable_irq_wake(ds1307->irq);
> > +
> > +       return 0;
> > +}
> > +
> > +static int ds1307_resume(struct device *dev)
> > +{
> > +       struct ds1307 *ds1307 = dev_get_drvdata(dev);
> > +
> > +       if (device_may_wakeup(dev))
> > +               disable_irq_wake(ds1307->irq);
> > +
> > +       return 0;
> > +}
> > +#endif
> > +
> > +static SIMPLE_DEV_PM_OPS(ds1307_pm_ops, ds1307_suspend, ds1307_resume);
> > +
> >  static struct i2c_driver ds1307_driver = {
> >         .driver = {
> >                 .name   = "rtc-ds1307",
> >                 .of_match_table = of_match_ptr(ds1307_of_match),
> >                 .acpi_match_table = ACPI_PTR(ds1307_acpi_ids),
> > +               .pm     = &ds1307_pm_ops,
> >         },
> >         .probe          = ds1307_probe,
> >         .id_table       = ds1307_id,
> > --
> > 2.9.3
> >
> 
> A gentle ping, any comments on this?
> 

It was rejected following the discussion you had with Heiner and your
email of the 25/08.

-- 
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

  reply	other threads:[~2017-12-15 13:04 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-24 10:30 [PATCH] rtc: ds1307: call the platform's logic for handle IRQs Enric Balletbo i Serra
2017-12-15 11:44 ` Enric Balletbo Serra
2017-12-15 13:04   ` Alexandre Belloni [this message]
2017-12-15 13:32     ` Enric Balletbo Serra

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171215130425.GA7022@piout.net \
    --to=alexandre.belloni@free-electrons.com \
    --cc=a.zummo@towertech.it \
    --cc=eballetbo@gmail.com \
    --cc=enric.balletbo@collabora.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox