[PATCH V2 7/8] ARM: dts: keystone-k2e-clocks: Add missing unit name to clock nodes that have regs

Nishanth Menon
2017-12-16T20:42:40Z

Add the control register as the base for the clock nodes which are
missing them. This squashes the following warnings of the effect when built
with W=1:
arch/arm/boot/dts/keystone-k2e-evm.dtb: Warning (unit_address_vs_reg): Node /soc@0/clocks/clkusb1 has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2e-evm.dtb: Warning (unit_address_vs_reg): Node /soc@0/clocks/clkhyperlink0 has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2e-evm.dtb: Warning (unit_address_vs_reg): Node /soc@0/clocks/clkpcie1 has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2e-evm.dtb: Warning (unit_address_vs_reg): Node /soc@0/clocks/clkxge has a reg or ranges property, but no unit name

Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
---
Changes since V1: rebase

V1: https://patchwork.kernel.org/patch/10115125/

arch/arm/boot/dts/keystone-k2e-clocks.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/keystone-k2e-clocks.dtsi b/arch/arm/boot/dts/keystone-k2e-clocks.dtsi
index 915a99d5bc5e..5e0e7d232161 100644
--- a/arch/arm/boot/dts/keystone-k2e-clocks.dtsi
+++ b/arch/arm/boot/dts/keystone-k2e-clocks.dtsi
@@ -32,7 +32,7 @@ clocks {
reg-names = "control";
};

- clkusb1: clkusb1 {
+ clkusb1: clkusb1@2350004 {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
clocks = <&chipclk16>;
@@ -42,7 +42,7 @@ clocks {
domain-id = <0>;
};

- clkhyperlink0: clkhyperlink0 {
+ clkhyperlink0: clkhyperlink02350030 {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
clocks = <&chipclk12>;
@@ -52,7 +52,7 @@ clocks {
domain-id = <5>;
};

- clkpcie1: clkpcie1 {
+ clkpcie1: clkpcie1@235006c {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
clocks = <&chipclk12>;
@@ -62,7 +62,7 @@ clocks {
domain-id = <18>;
};

- clkxge: clkxge {
+ clkxge: clkxge@23500c8 {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
clocks = <&chipclk13>;
--
2.14.1