[PATCH V2 4/8] ARM: dts: keystone: Add missing unit name to interrupt controller

Nishanth Menon
2017-12-16T20:42:28Z

Add base address for GIC as unit address. This also squashes the
following warnings when built with W=1:
arch/arm/boot/dts/keystone-k2hk-evm.dtb: Warning (unit_address_vs_reg): Node /interrupt-controller has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2l-evm.dtb: Warning (unit_address_vs_reg): Node /interrupt-controller has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2e-evm.dtb: Warning (unit_address_vs_reg): Node /interrupt-controller has a reg or ranges property, but no unit name

Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
---
Changes since V1: rebase

V1: https://patchwork.kernel.org/patch/10115099/

arch/arm/boot/dts/keystone.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index 01496910587a..93ea5c69ea77 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -27,7 +27,7 @@
reg = <0x00000000 0x80000000 0x00000000 0x40000000>;
};

- gic: interrupt-controller {
+ gic: interrupt-controller@2561000 {
compatible = "arm,gic-400", "arm,cortex-a15-gic";
#interrupt-cells = <3>;
interrupt-controller;
--
2.14.1