From: Nishanth Menon <nm@ti.com>
To: Russell King <linux@armlinux.org.uk>,
Mark Rutland <mark.rutland@arm.com>,
Rob Herring <robh+dt@kernel.org>,
Santosh Shilimkar <ssantosh@kernel.org>
Cc: <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>, <afd@ti.com>,
Nishanth Menon <nm@ti.com>
Subject: [PATCH V2 5/8] ARM: dts: keystone-clocks: Add missing unit name to clock nodes that have regs
Date: Sat, 16 Dec 2017 14:40:37 -0600 [thread overview]
Message-ID: <20171216204040.18017-6-nm@ti.com> (raw)
In-Reply-To: <20171216204040.18017-1-nm@ti.com>
Add the control register as the base for the clock nodes which are
missing them. This squashes some 78 warnings of the effect when built
with W=1.
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
---
Changes since V1: rebase
V1: https://patchwork.kernel.org/patch/10115129/
arch/arm/boot/dts/keystone-clocks.dtsi | 52 +++++++++++++++++-----------------
1 file changed, 26 insertions(+), 26 deletions(-)
diff --git a/arch/arm/boot/dts/keystone-clocks.dtsi b/arch/arm/boot/dts/keystone-clocks.dtsi
index f23147093fd8..457515b0736a 100644
--- a/arch/arm/boot/dts/keystone-clocks.dtsi
+++ b/arch/arm/boot/dts/keystone-clocks.dtsi
@@ -48,7 +48,7 @@ clocks {
clock-output-names = "gemtraceclk";
};
- chipstmxptclk: chipstmxptclk {
+ chipstmxptclk: chipstmxptclk@2310164 {
#clock-cells = <0>;
compatible = "ti,keystone,pll-divider-clock";
clocks = <&mainmuxclk>;
@@ -157,7 +157,7 @@ clocks {
clock-output-names = "chipclk1rstiso112";
};
- clkmodrst0: clkmodrst0 {
+ clkmodrst0: clkmodrst0@2350000 {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
clocks = <&chipclk16>;
@@ -168,7 +168,7 @@ clocks {
};
- clkusb: clkusb {
+ clkusb: clkusb@2350008 {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
clocks = <&chipclk16>;
@@ -178,7 +178,7 @@ clocks {
domain-id = <0>;
};
- clkaemifspi: clkaemifspi {
+ clkaemifspi: clkaemifspi@235000c {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
clocks = <&chipclk16>;
@@ -189,7 +189,7 @@ clocks {
};
- clkdebugsstrc: clkdebugsstrc {
+ clkdebugsstrc: clkdebugsstrc@2350014 {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
clocks = <&chipclk13>;
@@ -199,7 +199,7 @@ clocks {
domain-id = <1>;
};
- clktetbtrc: clktetbtrc {
+ clktetbtrc: clktetbtrc@2350018 {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
clocks = <&chipclk13>;
@@ -209,7 +209,7 @@ clocks {
domain-id = <1>;
};
- clkpa: clkpa {
+ clkpa: clkpa@235001c {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
clocks = <&paclk13>;
@@ -219,7 +219,7 @@ clocks {
domain-id = <2>;
};
- clkcpgmac: clkcpgmac {
+ clkcpgmac: clkcpgmac@2350020 {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
clocks = <&clkpa>;
@@ -229,7 +229,7 @@ clocks {
domain-id = <2>;
};
- clksa: clksa {
+ clksa: clksa@2350024 {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
clocks = <&clkpa>;
@@ -239,7 +239,7 @@ clocks {
domain-id = <2>;
};
- clkpcie: clkpcie {
+ clkpcie: clkpcie@2350028 {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
clocks = <&chipclk12>;
@@ -249,7 +249,7 @@ clocks {
domain-id = <3>;
};
- clksr: clksr {
+ clksr: clksr@2350034 {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
clocks = <&chipclk1rstiso112>;
@@ -259,7 +259,7 @@ clocks {
domain-id = <6>;
};
- clkgem0: clkgem0 {
+ clkgem0: clkgem0@235003c {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
clocks = <&chipclk1>;
@@ -269,7 +269,7 @@ clocks {
domain-id = <8>;
};
- clkddr30: clkddr30 {
+ clkddr30: clkddr30@235005c {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
clocks = <&chipclk12>;
@@ -279,7 +279,7 @@ clocks {
domain-id = <16>;
};
- clkwdtimer0: clkwdtimer0 {
+ clkwdtimer0: clkwdtimer0@2350000 {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
clocks = <&clkmodrst0>;
@@ -289,7 +289,7 @@ clocks {
domain-id = <0>;
};
- clkwdtimer1: clkwdtimer1 {
+ clkwdtimer1: clkwdtimer1@2350000 {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
clocks = <&clkmodrst0>;
@@ -299,7 +299,7 @@ clocks {
domain-id = <0>;
};
- clkwdtimer2: clkwdtimer2 {
+ clkwdtimer2: clkwdtimer2@2350000 {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
clocks = <&clkmodrst0>;
@@ -309,7 +309,7 @@ clocks {
domain-id = <0>;
};
- clkwdtimer3: clkwdtimer3 {
+ clkwdtimer3: clkwdtimer3@2350000 {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
clocks = <&clkmodrst0>;
@@ -319,7 +319,7 @@ clocks {
domain-id = <0>;
};
- clktimer15: clktimer15 {
+ clktimer15: clktimer15@2350000 {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
clocks = <&clkmodrst0>;
@@ -329,7 +329,7 @@ clocks {
domain-id = <0>;
};
- clkuart0: clkuart0 {
+ clkuart0: clkuart0@2350000 {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
clocks = <&clkmodrst0>;
@@ -339,7 +339,7 @@ clocks {
domain-id = <0>;
};
- clkuart1: clkuart1 {
+ clkuart1: clkuart1@2350000 {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
clocks = <&clkmodrst0>;
@@ -349,7 +349,7 @@ clocks {
domain-id = <0>;
};
- clkaemif: clkaemif {
+ clkaemif: clkaemif@2350000 {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
clocks = <&clkaemifspi>;
@@ -359,7 +359,7 @@ clocks {
domain-id = <0>;
};
- clkusim: clkusim {
+ clkusim: clkusim@2350000 {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
clocks = <&clkmodrst0>;
@@ -369,7 +369,7 @@ clocks {
domain-id = <0>;
};
- clki2c: clki2c {
+ clki2c: clki2c@2350000 {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
clocks = <&clkmodrst0>;
@@ -379,7 +379,7 @@ clocks {
domain-id = <0>;
};
- clkspi: clkspi {
+ clkspi: clkspi@2350000 {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
clocks = <&clkaemifspi>;
@@ -389,7 +389,7 @@ clocks {
domain-id = <0>;
};
- clkgpio: clkgpio {
+ clkgpio: clkgpio@2350000 {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
clocks = <&clkmodrst0>;
@@ -399,7 +399,7 @@ clocks {
domain-id = <0>;
};
- clkkeymgr: clkkeymgr {
+ clkkeymgr: clkkeymgr@2350000 {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
clocks = <&clkmodrst0>;
--
2.14.1
next prev parent reply other threads:[~2017-12-16 20:43 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-15 13:20 [PATCH 0/8] ARM: dts: keystone*: Stage 1 cleanup for W=1 Nishanth Menon
2017-12-15 13:20 ` [PATCH 1/8] ARM: dts: keystone*: Standardize license with SPDX tag Nishanth Menon
2017-12-15 13:20 ` [PATCH 2/8] ARM: dts: keystone*: Use a single soc0 instance Nishanth Menon
2017-12-15 13:38 ` Nishanth Menon
2017-12-16 8:33 ` santosh.shilimkar
2017-12-15 13:20 ` [PATCH 3/8] ARM: dts: keystone: Get rid of usage of skeleton.dtsi Nishanth Menon
2017-12-15 13:20 ` [PATCH 4/8] ARM: dts: keystone: Add missing unit name to interrupt controller Nishanth Menon
2017-12-15 13:20 ` [PATCH 5/8] ARM: dts: keystone-clocks: Add missing unit name to clock nodes that have regs Nishanth Menon
2017-12-15 13:21 ` [PATCH 6/8] ARM: dts: keystone-hk-clocks: " Nishanth Menon
2017-12-15 13:21 ` [PATCH 7/8] ARM: dts: keystone-k2e-clocks: " Nishanth Menon
2017-12-15 13:21 ` [PATCH 8/8] ARM: dts: keystone-k2l-clocks: " Nishanth Menon
2017-12-16 20:40 ` [PATCH V2 0/8] ARM: dts: keystone*: Stage 1 cleanup for W=1 Nishanth Menon
2017-12-16 20:40 ` [PATCH V2 1/8] ARM: dts: keystone*: Standardize license with SPDX tag Nishanth Menon
2017-12-16 20:40 ` [PATCH V2 2/8] ARM: dts: keystone*: Use a single soc0 instance Nishanth Menon
2017-12-16 20:40 ` [PATCH V2 3/8] ARM: dts: keystone: Get rid of usage of skeleton.dtsi Nishanth Menon
2017-12-16 20:40 ` [PATCH V2 4/8] ARM: dts: keystone: Add missing unit name to interrupt controller Nishanth Menon
2017-12-16 20:40 ` Nishanth Menon [this message]
2017-12-16 20:40 ` [PATCH V2 6/8] ARM: dts: keystone-hk-clocks: Add missing unit name to clock nodes that have regs Nishanth Menon
2017-12-16 20:40 ` [PATCH V2 7/8] ARM: dts: keystone-k2e-clocks: " Nishanth Menon
2017-12-16 20:40 ` [PATCH V2 8/8] ARM: dts: keystone-k2l-clocks: " Nishanth Menon
2017-12-16 22:39 ` [PATCH V2 0/8] ARM: dts: keystone*: Stage 1 cleanup for W=1 santosh.shilimkar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171216204040.18017-6-nm@ti.com \
--to=nm@ti.com \
--cc=afd@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=ssantosh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox