Re: [PATCH net-next v7 1/2] dt-bindings: net: add DT bindings for Socionext UniPhier AVE

[Kunihiko Hayashi <hayashi.kunihiko@socionext.com>]

Hello Andrew,

On Thu, 21 Dec 2017 12:32:54 +0100 Andrew Lunn <andrew@lunn.ch> wrote:

> > +Optional properties:
> > + - resets: A phandle to the reset control for the MAC
> > + - local-mac-address: See ethernet.txt in the same directory.
> > +
> > +Required subnode:
> > + - mdio: Device tree subnode with the following required properties:
> > +
> > +Example:
> 
> It sounds like there should be some properties before the Example.

Indeed, this is my carelessness.

> 
>    Andrew
> 
> > +
> > +	ether: ethernet@65000000 {
> > +		compatible = "socionext,uniphier-ld20-ave4";
> > +		reg = <0x65000000 0x8500>;
> > +		interrupts = <0 66 4>;
> > +		phy-mode = "rgmii";
> > +		phy-handle = <&ethphy>;
> > +		clocks = <&sys_clk 6>;
> > +		resets = <&sys_rst 6>;
> > +		local-mac-address = [00 00 00 00 00 00];
> 
> Typically you would put a blank line here, before the mdio node.

Okay, I'll put it.

> > +		mdio {
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> > +			ethphy: ethphy@1 {
> > +				reg = <1>;
> > +			};
> > +		};
> > +	};
> 
>   Andrew

Thank you,

---
Best Regards,
Kunihiko Hayashi