Re: [PATCH] Device tree binding for Avago APDS990X light sensor

[Pavel Machek <pavel@ucw.cz>]

[-- Attachment #1: Type: text/plain, Size: 1063 bytes --]

Hi!

> > +Required properties:
> > +- compatible: "avago,apds990x"
> > +- reg: address on the I2C bus
> > +- interrupts: external interrupt line number
> > +- Vdd-supply: power supply for VDD
> > +- Vled-supply: power supply for LEDA
> 
> AFAIK the custom is to use lower case letters for regulator supplies.
> 
> > +- ga: Glass attenuation
> > +- cf1: Clear channel factor 1
> > +- irf1: IR channel factor 1
> > +- cf2: Clear channel factor 2
> > +- irf2: IR channel factor 2
> > +- df: Device factor
> > +- pdrive: IR current, one of APDS_IRLED_CURR_XXXmA values
> > +- ppcount: Proximity pulse count
> 
> Are these device specific? If so, please add the vendor prefix to them.

Well, whole binding is "vendor specific". Does it make sense to add
prefix in such case?

> I might not use short abbreviations such as "df" either. I wonder what
> others think.

I see.

Thanks,
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]