From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Kevin Cernekee <cernekee@chromium.org>,
Andrew Lunn <andrew@lunn.ch>,
"David S. Miller" <davem@davemloft.net>
Subject: [PATCH 3.18 20/32] net: igmp: Use correct source address on IGMPv3 reports
Date: Mon, 1 Jan 2018 15:22:27 +0100 [thread overview]
Message-ID: <20180101140016.955510390@linuxfoundation.org> (raw)
In-Reply-To: <20180101140012.582300879@linuxfoundation.org>
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kevin Cernekee <cernekee@chromium.org>
[ Upstream commit a46182b00290839fa3fa159d54fd3237bd8669f0 ]
Closing a multicast socket after the final IPv4 address is deleted
from an interface can generate a membership report that uses the
source IP from a different interface. The following test script, run
from an isolated netns, reproduces the issue:
#!/bin/bash
ip link add dummy0 type dummy
ip link add dummy1 type dummy
ip link set dummy0 up
ip link set dummy1 up
ip addr add 10.1.1.1/24 dev dummy0
ip addr add 192.168.99.99/24 dev dummy1
tcpdump -U -i dummy0 &
socat EXEC:"sleep 2" \
UDP4-DATAGRAM:239.101.1.68:8889,ip-add-membership=239.0.1.68:10.1.1.1 &
sleep 1
ip addr del 10.1.1.1/24 dev dummy0
sleep 5
kill %tcpdump
RFC 3376 specifies that the report must be sent with a valid IP source
address from the destination subnet, or from address 0.0.0.0. Add an
extra check to make sure this is the case.
Signed-off-by: Kevin Cernekee <cernekee@chromium.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ipv4/igmp.c | 20 +++++++++++++++++++-
1 file changed, 19 insertions(+), 1 deletion(-)
--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -89,6 +89,7 @@
#include <linux/rtnetlink.h>
#include <linux/times.h>
#include <linux/pkt_sched.h>
+#include <linux/byteorder/generic.h>
#include <net/net_namespace.h>
#include <net/arp.h>
@@ -318,6 +319,23 @@ igmp_scount(struct ip_mc_list *pmc, int
return scount;
}
+/* source address selection per RFC 3376 section 4.2.13 */
+static __be32 igmpv3_get_srcaddr(struct net_device *dev,
+ const struct flowi4 *fl4)
+{
+ struct in_device *in_dev = __in_dev_get_rcu(dev);
+
+ if (!in_dev)
+ return htonl(INADDR_ANY);
+
+ for_ifa(in_dev) {
+ if (inet_ifa_match(fl4->saddr, ifa))
+ return fl4->saddr;
+ } endfor_ifa(in_dev);
+
+ return htonl(INADDR_ANY);
+}
+
static struct sk_buff *igmpv3_newpack(struct net_device *dev, unsigned int mtu)
{
struct sk_buff *skb;
@@ -366,7 +384,7 @@ static struct sk_buff *igmpv3_newpack(st
pip->frag_off = htons(IP_DF);
pip->ttl = 1;
pip->daddr = fl4.daddr;
- pip->saddr = fl4.saddr;
+ pip->saddr = igmpv3_get_srcaddr(dev, &fl4);
pip->protocol = IPPROTO_IGMP;
pip->tot_len = 0; /* filled in later */
ip_select_ident(skb, NULL);
next prev parent reply other threads:[~2018-01-01 14:23 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-01 14:22 [PATCH 3.18 00/32] 3.18.91-stable review Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 01/32] ACPI: APEI / ERST: Fix missing error handling in erst_reader() Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 02/32] crypto: mcryptd - protect the per-CPU queue with a lock Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 03/32] mfd: twl4030-audio: Fix sibling-node lookup Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 04/32] mfd: twl6040: Fix child-node lookup Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 05/32] ALSA: rawmidi: Avoid racy info ioctl via ctl device Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 06/32] ALSA: usb-audio: Fix the missing ctl name suffix at parsing SU Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 07/32] PCI / PM: Force devices to D0 in pci_pm_thaw_noirq() Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 08/32] parisc: Hide Diva-built-in serial aux and graphics card Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 09/32] KVM: X86: Fix load RFLAGS w/o the fixed bit Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 10/32] powerpc/perf: Dereference BHRB entries safely Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 11/32] net: mvneta: clear interface link status on port disable Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 12/32] tracing: Remove extra zeroing out of the ring buffer page Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 13/32] tracing: Fix possible double free on failure of allocating trace buffer Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 14/32] tracing: Fix crash when it fails to alloc ring buffer Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 15/32] ring-buffer: Mask out the info bits when returning buffer page length Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 16/32] ASoC: twl4030: fix child-node lookup Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 17/32] kbuild: add -fno-stack-check to kernel build options Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 18/32] ipv4: igmp: guard against silly MTU values Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 19/32] ipv6: mcast: better catch silly mtu values Greg Kroah-Hartman
2018-01-01 14:22 ` Greg Kroah-Hartman [this message]
2018-01-01 14:22 ` [PATCH 3.18 21/32] netlink: Add netns check on taps Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 22/32] net: qmi_wwan: add Sierra EM7565 1199:9091 Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 23/32] tcp md5sig: Use skbs saddr when replying to an incoming segment Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 24/32] tg3: Fix rx hang on MTU change with 5717/5719 Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 25/32] net: mvmdio: disable/unprepare clocks in EPROBE_DEFER case Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 26/32] sctp: Replace use of sockets_allocated with specified macro Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 27/32] net: ipv4: fix for a race condition in raw_sendmsg Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 28/32] USB: serial: option: add support for Telit ME910 PID 0x1101 Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 29/32] usb: Add device quirk for Logitech HD Pro Webcam C925e Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 30/32] usb: add RESET_RESUME for ELSA MicroLink 56K Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 31/32] usb: xhci: Add XHCI_TRUST_TX_LENGTH for Renesas uPD720201 Greg Kroah-Hartman
2018-01-01 14:22 ` [PATCH 3.18 32/32] n_tty: fix EXTPROC vs ICANON interaction with TIOCINQ (aka FIONREAD) Greg Kroah-Hartman
2018-01-01 18:07 ` [PATCH 3.18 00/32] 3.18.91-stable review kernelci.org bot
2018-01-02 16:46 ` Guenter Roeck
2018-01-02 22:22 ` Shuah Khan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180101140016.955510390@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=andrew@lunn.ch \
--cc=cernekee@chromium.org \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox