From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: "H. Peter Anvin" <hpa@zytor.com>,
Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@redhat.com>,
x86@kernel.org, linux-kernel@vger.kernel.org
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCH v1 2/6] x86/boot: Introduce helpers for serial I/O
Date: Sun, 14 Jan 2018 16:32:50 +0200 [thread overview]
Message-ID: <20180114143254.15429-2-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20180114143254.15429-1-andriy.shevchenko@linux.intel.com>
As preparatory to enable earlyprintk on non-standard ports on x86,
introduce serial_in() and serial_out() helpers to perform serial I/O.
No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
arch/x86/boot/boot.h | 2 +
arch/x86/boot/compressed/early_serial_console.c | 3 ++
arch/x86/boot/compressed/misc.c | 4 +-
arch/x86/boot/compressed/misc.h | 4 ++
arch/x86/boot/early_serial_console.c | 60 +++++++++++++++++--------
arch/x86/boot/tty.c | 7 ++-
6 files changed, 57 insertions(+), 23 deletions(-)
diff --git a/arch/x86/boot/boot.h b/arch/x86/boot/boot.h
index d9f8279774f6..7e6ac187275c 100644
--- a/arch/x86/boot/boot.h
+++ b/arch/x86/boot/boot.h
@@ -299,6 +299,8 @@ int check_knl_erratum(void);
int validate_cpu(void);
/* early_serial_console.c */
+extern unsigned int (*serial_in)(unsigned long addr, int offset);
+extern void (*serial_out)(unsigned long addr, int offset, int value);
extern unsigned long early_serial_base;
void console_init(void);
diff --git a/arch/x86/boot/compressed/early_serial_console.c b/arch/x86/boot/compressed/early_serial_console.c
index 5e3a66478754..4b6269624b59 100644
--- a/arch/x86/boot/compressed/early_serial_console.c
+++ b/arch/x86/boot/compressed/early_serial_console.c
@@ -1,5 +1,8 @@
#include "misc.h"
+unsigned int (*serial_in)(unsigned long addr, int offset);
+void (*serial_out)(unsigned long addr, int offset, int value);
+
unsigned long early_serial_base;
#include "../early_serial_console.c"
diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c
index 98761a1576ce..0b16675c2523 100644
--- a/arch/x86/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc.c
@@ -97,10 +97,10 @@ static void serial_putchar(int ch)
{
unsigned timeout = 0xffff;
- while ((inb(early_serial_base + LSR) & XMTRDY) == 0 && --timeout)
+ while ((serial_in(early_serial_base, LSR) & XMTRDY) == 0 && --timeout)
cpu_relax();
- outb(ch, early_serial_base + TXR);
+ serial_out(early_serial_base, TXR, ch);
}
void __putstr(const char *s)
diff --git a/arch/x86/boot/compressed/misc.h b/arch/x86/boot/compressed/misc.h
index d36d4398a6b0..266e6b93788c 100644
--- a/arch/x86/boot/compressed/misc.h
+++ b/arch/x86/boot/compressed/misc.h
@@ -101,9 +101,13 @@ static inline void finalize_identity_maps(void)
#ifdef CONFIG_EARLY_PRINTK
/* early_serial_console.c */
+extern unsigned int (*serial_in)(unsigned long addr, int offset);
+extern void (*serial_out)(unsigned long addr, int offset, int value);
extern unsigned long early_serial_base;
void console_init(void);
#else
+static unsigned int (*serial_in)(unsigned long addr, int offset);
+static void (*serial_out)(unsigned long addr, int offset, int value);
static const unsigned long early_serial_base;
static inline void console_init(void)
{ }
diff --git a/arch/x86/boot/early_serial_console.c b/arch/x86/boot/early_serial_console.c
index a5aec142c91a..8b091919b3b9 100644
--- a/arch/x86/boot/early_serial_console.c
+++ b/arch/x86/boot/early_serial_console.c
@@ -23,22 +23,46 @@
#define DEFAULT_BAUD 9600
-static void early_serial_init(unsigned long port, int baud)
+static unsigned int io_serial_in(unsigned long addr, int offset)
+{
+ return inb(addr + offset);
+}
+
+static void io_serial_out(unsigned long addr, int offset, int value)
+{
+ outb(value, addr + offset);
+}
+
+static void early_serial_configure(unsigned long port, int baud)
{
unsigned char c;
unsigned divisor;
- outb(0x3, port + LCR); /* 8n1 */
- outb(0, port + IER); /* no interrupt */
- outb(0, port + FCR); /* no fifo */
- outb(0x3, port + MCR); /* DTR + RTS */
+ serial_out(port, LCR, 0x3); /* 8n1 */
+ serial_out(port, IER, 0); /* no interrupt */
+ serial_out(port, FCR, 0); /* no fifo */
+ serial_out(port, MCR, 0x3); /* DTR + RTS */
divisor = 115200 / baud;
- c = inb(port + LCR);
- outb(c | DLAB, port + LCR);
- outb(divisor & 0xff, port + DLL);
- outb((divisor >> 8) & 0xff, port + DLH);
- outb(c & ~DLAB, port + LCR);
+ c = serial_in(port, LCR);
+ serial_out(port, LCR, c | DLAB);
+ serial_out(port, DLL, divisor & 0xff);
+ serial_out(port, DLH, (divisor >> 8) & 0xff);
+ serial_out(port, LCR, c & ~DLAB);
+}
+
+static void early_serial_init(unsigned long port, int baud)
+{
+ /* Assign serial I/O accessors */
+ if (port) {
+ /* These will always be IO based ports */
+ serial_in = io_serial_in;
+ serial_out = io_serial_out;
+ } else {
+ return;
+ }
+
+ early_serial_configure(port, baud);
early_serial_base = port;
}
@@ -94,8 +118,7 @@ static void parse_earlyprintk(void)
baud = DEFAULT_BAUD;
}
- if (port)
- early_serial_init(port, baud);
+ early_serial_init(port, baud);
}
#define BASE_BAUD (1843200/16)
@@ -104,11 +127,11 @@ static unsigned int probe_baud(int port)
unsigned char lcr, dll, dlh;
unsigned int quot;
- lcr = inb(port + LCR);
- outb(lcr | DLAB, port + LCR);
- dll = inb(port + DLL);
- dlh = inb(port + DLH);
- outb(lcr, port + LCR);
+ lcr = serial_in(port, LCR);
+ serial_out(port, LCR, lcr | DLAB);
+ dll = serial_in(port, DLL);
+ dlh = serial_in(port, DLH);
+ serial_out(port, LCR, lcr);
quot = (dlh << 8) | dll;
return BASE_BAUD / quot;
@@ -141,8 +164,7 @@ static void parse_console_uart8250(void)
else
baud = probe_baud(port);
- if (port)
- early_serial_init(port, baud);
+ early_serial_init(port, baud);
}
void console_init(void)
diff --git a/arch/x86/boot/tty.c b/arch/x86/boot/tty.c
index d1d34c6ca153..b6aa9db65cda 100644
--- a/arch/x86/boot/tty.c
+++ b/arch/x86/boot/tty.c
@@ -15,6 +15,9 @@
#include "boot.h"
+unsigned int (*serial_in)(unsigned long addr, int offset);
+void (*serial_out)(unsigned long addr, int offset, int value);
+
unsigned long early_serial_base;
#define XMTRDY 0x20
@@ -31,10 +34,10 @@ static void __attribute__((section(".inittext"))) serial_putchar(int ch)
{
unsigned timeout = 0xffff;
- while ((inb(early_serial_base + LSR) & XMTRDY) == 0 && --timeout)
+ while ((serial_in(early_serial_base, LSR) & XMTRDY) == 0 && --timeout)
cpu_relax();
- outb(ch, early_serial_base + TXR);
+ serial_out(early_serial_base, TXR, ch);
}
static void __attribute__((section(".inittext"))) bios_putchar(int ch)
--
2.15.1
next prev parent reply other threads:[~2018-01-14 14:34 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-14 14:32 [PATCH v1 1/6] x86/boot: Convert early_serial_base to unsigned long Andy Shevchenko
2018-01-14 14:32 ` Andy Shevchenko [this message]
2018-01-14 14:32 ` [PATCH v1 3/6] x86/boot: Add MMIO byte accessors Andy Shevchenko
2018-01-14 14:32 ` [PATCH v1 4/6] x86/boot: Assume MMIO if serial base address supplied via earlyprintk Andy Shevchenko
2018-01-16 3:13 ` Ingo Molnar
2018-01-16 10:55 ` Andy Shevchenko
2018-01-16 15:55 ` Ingo Molnar
2018-05-03 10:45 ` Andy Shevchenko
2018-01-14 14:32 ` [PATCH v1 5/6] x86/boot: Allow longer parameter list for earlyprintk Andy Shevchenko
2018-01-16 3:11 ` Ingo Molnar
2018-01-16 10:57 ` Andy Shevchenko
2018-01-16 15:51 ` Ingo Molnar
2018-05-03 11:48 ` Andy Shevchenko
2018-01-14 14:32 ` [PATCH v1 6/6] x86/boot: Support nocfg parameter " Andy Shevchenko
2018-01-16 3:12 ` Ingo Molnar
2018-01-16 11:00 ` Andy Shevchenko
2018-01-16 15:53 ` Ingo Molnar
-- strict thread matches above, loose matches on Subject: below --
2025-05-02 12:29 [PATCH v1 0/6] x86/boot: Enable earlyprintk on MMIO (8-bit) Andy Shevchenko
2025-05-02 12:29 ` [PATCH v1 2/6] x86/boot: Introduce helpers for serial I/O Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180114143254.15429-2-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox