From: "Radim Krčmář" <rkrcmar@redhat.com>
To: Liran Alon <liran.alon@oracle.com>
Cc: vkuznets@redhat.com, x86@kernel.org, pbonzini@redhat.com,
linux-kernel@vger.kernel.org, kvm@vger.kernel.org,
"Michael S. Tsirkin" <mst@redhat.com>,
Jason Wang <jasowang@redhat.com>
Subject: Re: [PATCH] x86/kvm: disable fast MMIO when running nested
Date: Thu, 25 Jan 2018 15:16:21 +0100 [thread overview]
Message-ID: <20180125141620.GA7663@flask> (raw)
In-Reply-To: <6690c53c-fc99-44ea-9090-6e7438c1bc98@default>
2018-01-25 01:55-0800, Liran Alon:
> ----- vkuznets@redhat.com wrote:
> > I was investigating an issue with seabios >= 1.10 which stopped
> > working
> > for nested KVM on Hyper-V. The problem appears to be in
> > handle_ept_violation() function: when we do fast mmio we need to skip
> > the instruction so we do kvm_skip_emulated_instruction(). This,
> > however,
> > depends on VM_EXIT_INSTRUCTION_LEN field being set correctly in VMCS.
> > However, this is not the case.
> >
> > Intel's manual doesn't mandate VM_EXIT_INSTRUCTION_LEN to be set when
> > EPT MISCONFIG occurs. While on real hardware it was observed to be
> > set,
> > some hypervisors follow the spec and don't set it; we end up
> > advancing
> > IP with some random value.
> >
> > I checked with Microsoft and they confirmed they don't fill
> > VM_EXIT_INSTRUCTION_LEN on EPT MISCONFIG.
> >
> > Fix the issue by disabling fast mmio when running nested.
> >
> > Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
> > ---
> > arch/x86/kvm/vmx.c | 9 ++++++++-
> > 1 file changed, 8 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
> > index c829d89e2e63..54afb446f38e 100644
> > --- a/arch/x86/kvm/vmx.c
> > +++ b/arch/x86/kvm/vmx.c
> > @@ -6558,9 +6558,16 @@ static int handle_ept_misconfig(struct kvm_vcpu
> > *vcpu)
> > /*
> > * A nested guest cannot optimize MMIO vmexits, because we have an
> > * nGPA here instead of the required GPA.
> > + * Skipping instruction below depends on undefined behavior:
> > Intel's
> > + * manual doesn't mandate VM_EXIT_INSTRUCTION_LEN to be set in VMCS
> > + * when EPT MISCONFIG occurs and while on real hardware it was
> > observed
> > + * to be set, other hypervisors (namely Hyper-V) don't set it, we
> > end
> > + * up advancing IP with some random value. Disable fast mmio when
> > + * running nested and keep it for real hardware in hope that
> > + * VM_EXIT_INSTRUCTION_LEN will always be set correctly.
>
> If Intel manual doesn't mandate VM_EXIT_INSTRUCTION_LEN to be set in VMCS on EPT_MISCONFIG,
> I don't think we should do this on real-hardware as-well.
Neither do I, but you can see the last discussion on this topic,
https://patchwork.kernel.org/patch/9903811/. In short, we've agreed to
limit the hack to real hardware and wait for Intel or virtio changes.
Michael and Jason, any progress on implementing a fast virtio mechanism
that doesn't rely on undefined behavior?
(Encode writing instruction length into last 4 bits of MMIO address,
side-channel say that accesses to the MMIO area always use certain
instruction length, use hypercall, ...)
Thanks.
next prev parent reply other threads:[~2018-01-25 14:16 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-25 9:55 [PATCH] x86/kvm: disable fast MMIO when running nested Liran Alon
2018-01-25 14:16 ` Radim Krčmář [this message]
2018-01-25 14:39 ` Jason Wang
2018-01-25 14:49 ` Paolo Bonzini
2018-01-25 17:11 ` Michael S. Tsirkin
2018-01-26 2:41 ` Jason Wang
2018-01-26 2:49 ` Michael S. Tsirkin
2018-01-26 3:21 ` Jason Wang
-- strict thread matches above, loose matches on Subject: below --
2018-01-24 15:12 Vitaly Kuznetsov
2018-01-25 7:55 ` Wanpeng Li
2018-01-25 14:34 ` Radim Krčmář
2018-01-25 14:34 ` Paolo Bonzini
2018-01-25 14:49 ` Vitaly Kuznetsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180125141620.GA7663@flask \
--to=rkrcmar@redhat.com \
--cc=jasowang@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=liran.alon@oracle.com \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=vkuznets@redhat.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox