Re: [PATCHv2] ARM: dts: imx6q-bx50v3: Enable secure-reg-access

[Shawn Guo <shawnguo@kernel.org>]

On Mon, Feb 05, 2018 at 06:08:40PM +0100, Sebastian Reichel wrote:
> From: Peter Senna Tschudin <peter.senna@collabora.com>
> 
> Enable secure debug enable register access for Bx50v3 devices to enable
> PMU and hardware counters for perf.
> 
> Signed-off-by: Peter Senna Tschudin <peter.senna@collabora.com>
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
> ---
> Changes since PATCHv1:
>  * add property by adding a label to the pmu node in imx6qdl and
>    referencing it in bx50v3.dtsi.
> ---
>  arch/arm/boot/dts/imx6q-bx50v3.dtsi | 4 ++++
>  arch/arm/boot/dts/imx6qdl.dtsi      | 2 +-
>  2 files changed, 5 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
> index 916ea94d75ca..2baffc8b9094 100644
> --- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi
> +++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
> @@ -388,3 +388,7 @@
>  		#interrupt-cells = <1>;
>  	};
>  };
> +
> +&pmu {
> +	secure-reg-access;
> +};

The labelled node should be sorted alphabetically.  That said, it should
be added before &usdhc2.  I fixed it up and applied the patch.

Shawn

> diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
> index 59ff86695a14..2b921de44c02 100644
> --- a/arch/arm/boot/dts/imx6qdl.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl.dtsi
> @@ -143,7 +143,7 @@
>  		};
>  	};
>  
> -	pmu {
> +	pmu: pmu {
>  		compatible = "arm,cortex-a9-pmu";
>  		interrupt-parent = <&gpc>;
>  		interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
> -- 
> 2.15.1
>