From: Baoquan He <bhe@redhat.com>
To: linux-kernel@vger.kernel.org, ebiederm@xmission.com
Cc: mingo@kernel.org, tglx@linutronix.de, x86@kernel.org,
douly.fnst@cn.fujitsu.com, joro@8bytes.org, uobergfe@redhat.com,
prarit@redhat.com, Baoquan He <bhe@redhat.com>
Subject: [PATCH v3 4/5] x86/apic: Rename variable/function related to x86_io_apic_ops
Date: Fri, 9 Feb 2018 20:10:07 +0800 [thread overview]
Message-ID: <20180209121008.28980-5-bhe@redhat.com> (raw)
In-Reply-To: <20180209121008.28980-1-bhe@redhat.com>
The names of x86_io_apic_ops and its two member variables, are
misleading. The .read member is to read IO_APIC reg, while .disable
which hook native_disable_io_apic/irq_remapping_disable_io_apic
is actually used to restore boot irq mode, not disable IO_APIC.
So rename x86_io_apic_ops to x86_apic_ops since it doesn't only
handle IO_APIC, also LAPIC.
And also rename its member variables and the related hooks.
Signed-off-by: Baoquan He <bhe@redhat.com>
---
arch/x86/include/asm/io_apic.h | 6 +++---
arch/x86/include/asm/x86_init.h | 8 ++++----
arch/x86/kernel/apic/io_apic.c | 4 ++--
arch/x86/kernel/x86_init.c | 6 +++---
arch/x86/xen/apic.c | 2 +-
drivers/iommu/irq_remapping.c | 4 ++--
6 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index 5e389145d808..06fec4426458 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -183,11 +183,11 @@ extern void disable_ioapic_support(void);
extern void __init io_apic_init_mappings(void);
extern unsigned int native_io_apic_read(unsigned int apic, unsigned int reg);
-extern void native_disable_io_apic(void);
+extern void native_restore_boot_irq_mode(void);
static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)
{
- return x86_io_apic_ops.read(apic, reg);
+ return x86_apic_ops.io_apic_read(apic, reg);
}
extern void setup_IO_APIC(void);
@@ -229,7 +229,7 @@ static inline void mp_save_irq(struct mpc_intsrc *m) { }
static inline void disable_ioapic_support(void) { }
static inline void io_apic_init_mappings(void) { }
#define native_io_apic_read NULL
-#define native_disable_io_apic NULL
+#define native_restore_boot_irq_mode NULL
static inline void setup_IO_APIC(void) { }
static inline void enable_IO_APIC(void) { }
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index fc2f082ac635..88306054bd98 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -274,16 +274,16 @@ struct x86_msi_ops {
void (*restore_msi_irqs)(struct pci_dev *dev);
};
-struct x86_io_apic_ops {
- unsigned int (*read) (unsigned int apic, unsigned int reg);
- void (*disable)(void);
+struct x86_apic_ops {
+ unsigned int (*io_apic_read) (unsigned int apic, unsigned int reg);
+ void (*restore)(void);
};
extern struct x86_init_ops x86_init;
extern struct x86_cpuinit_ops x86_cpuinit;
extern struct x86_platform_ops x86_platform;
extern struct x86_msi_ops x86_msi;
-extern struct x86_io_apic_ops x86_io_apic_ops;
+extern struct x86_apic_ops x86_apic_ops;
extern void x86_early_init_platform_quirks(void);
extern void x86_init_noop(void);
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 9d86b10c2121..68129f11e7db 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1410,7 +1410,7 @@ void __init enable_IO_APIC(void)
clear_IO_APIC();
}
-void native_disable_io_apic(void)
+void native_restore_boot_irq_mode(void)
{
/*
* If the i8259 is routed through an IOAPIC
@@ -1443,7 +1443,7 @@ void restore_boot_irq_mode(void)
if (!nr_legacy_irqs())
return;
- x86_io_apic_ops.disable();
+ x86_apic_ops.restore();
}
#ifdef CONFIG_X86_32
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 1151ccd72ce9..2bccd03bd654 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -146,7 +146,7 @@ void arch_restore_msi_irqs(struct pci_dev *dev)
}
#endif
-struct x86_io_apic_ops x86_io_apic_ops __ro_after_init = {
- .read = native_io_apic_read,
- .disable = native_disable_io_apic,
+struct x86_apic_ops x86_apic_ops __ro_after_init = {
+ .io_apic_read = native_io_apic_read,
+ .restore = native_restore_boot_irq_mode,
};
diff --git a/arch/x86/xen/apic.c b/arch/x86/xen/apic.c
index de58533d3664..2163888497d3 100644
--- a/arch/x86/xen/apic.c
+++ b/arch/x86/xen/apic.c
@@ -215,7 +215,7 @@ static void __init xen_apic_check(void)
}
void __init xen_init_apic(void)
{
- x86_io_apic_ops.read = xen_io_apic_read;
+ x86_apic_ops.io_apic_read = xen_io_apic_read;
/* On PV guests the APIC CPUID bit is disabled so none of the
* routines end up executing. */
if (!xen_initial_domain())
diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c
index 49721b4e1975..496deee3ae3a 100644
--- a/drivers/iommu/irq_remapping.c
+++ b/drivers/iommu/irq_remapping.c
@@ -27,7 +27,7 @@ int disable_irq_post = 0;
static int disable_irq_remap;
static struct irq_remap_ops *remap_ops;
-static void irq_remapping_disable_io_apic(void)
+static void irq_remapping_restore_boot_irq_mode(void)
{
/*
* With interrupt-remapping, for now we will use virtual wire A
@@ -42,7 +42,7 @@ static void irq_remapping_disable_io_apic(void)
static void __init irq_remapping_modify_x86_ops(void)
{
- x86_io_apic_ops.disable = irq_remapping_disable_io_apic;
+ x86_apic_ops.restore = irq_remapping_restore_boot_irq_mode;
}
static __init int setup_nointremap(char *str)
--
2.13.6
next prev parent reply other threads:[~2018-02-09 12:10 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-09 12:10 [PATCH v3 0/5] x86/apic: Fix restoring boot irq mode in reboot and kexec/kdump Baoquan He
2018-02-09 12:10 ` [PATCH v3 1/5] x86/apic: Split out restore_boot_irq_mode from disable_IO_APIC Baoquan He
2018-02-09 12:10 ` [PATCH v3 2/5] x86/apic: Fix restoring boot irq mode in reboot and kexec/kdump Baoquan He
2018-02-12 3:08 ` Eric W. Biederman
2018-02-12 10:03 ` Baoquan He
2018-02-13 2:43 ` Dou Liyang
2018-02-13 3:24 ` Baoquan He
2018-02-13 17:40 ` Eric W. Biederman
2018-02-14 3:22 ` Dou Liyang
2018-02-13 7:43 ` Baoquan He
2018-02-13 17:44 ` Eric W. Biederman
2018-02-14 2:44 ` Baoquan He
2018-02-09 12:10 ` [PATCH v3 3/5] x86/apic: Remove useless disable_IO_APIC Baoquan He
2018-02-09 12:10 ` Baoquan He [this message]
2018-02-09 12:10 ` [PATCH v3 5/5] x86/apic: Set up through-local-APIC on boot CPU if 'noapic' specified Baoquan He
2018-02-12 4:06 ` [PATCH v3 0/5] x86/apic: Fix restoring boot irq mode in reboot and kexec/kdump Dou Liyang
2018-02-12 5:11 ` Eric W. Biederman
2018-02-12 8:58 ` Dou Liyang
2018-02-12 9:59 ` Baoquan He
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180209121008.28980-5-bhe@redhat.com \
--to=bhe@redhat.com \
--cc=douly.fnst@cn.fujitsu.com \
--cc=ebiederm@xmission.com \
--cc=joro@8bytes.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=prarit@redhat.com \
--cc=tglx@linutronix.de \
--cc=uobergfe@redhat.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).