From: Mika Westerberg <mika.westerberg@linux.intel.com>
To: linux-kernel@vger.kernel.org
Cc: Andreas Noever <andreas.noever@gmail.com>,
Michael Jamet <michael.jamet@intel.com>,
Yehezkel Bernat <yehezkel.bernat@intel.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Mario.Limonciello@dell.com,
Radion Mirchevsky <radion.mirchevsky@intel.com>,
Mika Westerberg <mika.westerberg@linux.intel.com>
Subject: [PATCH 00/18] thunderbolt: Add support for Intel Titan Ridge
Date: Tue, 13 Feb 2018 20:00:00 +0300 [thread overview]
Message-ID: <20180213170018.9780-1-mika.westerberg@linux.intel.com> (raw)
Hi,
This series adds support for Intel Titan Ridge Thunderbolt controller.
Titan Ridge is the next generation Thunderbolt 3 controller and successor
of Alpine Ridge.
In addition to fixes and Titan Ridge support this series adds following:
- USB only security level (SL4).
- A new attribute for devices telling whether they were connected
automatically during boot.
- Preboot ACL allows userspace to specify a list of devices (based on
device unique_id) that the firmware automatically connects during boot.
Bjorn, I've Cc'd you the series as well because I would like to get your
blessing for patch [2/18] as it uses functions from PCI subsystem.
Thanks!
Mika Westerberg (13):
thunderbolt: Resume control channel after hibernation image is created
thunderbolt: Serialize PCIe tunnel creation with PCI rescan
thunderbolt: Handle connecting device in place of host properly
thunderbolt: Do not overwrite error code when domain adding fails
thunderbolt: Wait a bit longer for root switch config space
thunderbolt: Wait a bit longer for ICM to authenticate the active NVM
thunderbolt: Handle rejected Thunderbolt devices
thunderbolt: Factor common ICM add and update operations out
thunderbolt: Add tb_switch_get()
thunderbolt: Add constant for approval timeout
thunderbolt: Move driver ready handling to struct icm
thunderbolt: Add support for preboot ACL
thunderbolt: Introduce USB only (SL4) security level
Radion Mirchevsky (4):
thunderbolt: Correct function name in kernel-doc comment
thunderbolt: Add tb_switch_find_by_route()
thunderbolt: Add tb_xdomain_find_by_route()
thunderbolt: Add support for Intel Titan Ridge
Yehezkel Bernat (1):
thunderbolt: Add 'boot' attribute for devices
Documentation/ABI/testing/sysfs-bus-thunderbolt | 33 ++
drivers/thunderbolt/dma_port.c | 28 +-
drivers/thunderbolt/domain.c | 129 +++-
drivers/thunderbolt/icm.c | 757 +++++++++++++++++++++---
drivers/thunderbolt/nhi.c | 5 +-
drivers/thunderbolt/nhi.h | 5 +
drivers/thunderbolt/switch.c | 61 +-
drivers/thunderbolt/tb.h | 14 +
drivers/thunderbolt/tb_msgs.h | 180 +++++-
drivers/thunderbolt/xdomain.c | 40 +-
include/linux/thunderbolt.h | 19 +
11 files changed, 1172 insertions(+), 99 deletions(-)
--
2.15.1
next reply other threads:[~2018-02-13 17:00 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-13 17:00 Mika Westerberg [this message]
2018-02-13 17:00 ` [PATCH 01/18] thunderbolt: Resume control channel after hibernation image is created Mika Westerberg
2018-02-13 17:00 ` [PATCH 02/18] thunderbolt: Serialize PCIe tunnel creation with PCI rescan Mika Westerberg
2018-02-13 17:00 ` [PATCH 03/18] thunderbolt: Handle connecting device in place of host properly Mika Westerberg
2018-02-13 17:00 ` [PATCH 04/18] thunderbolt: Do not overwrite error code when domain adding fails Mika Westerberg
2018-02-13 17:00 ` [PATCH 05/18] thunderbolt: Wait a bit longer for root switch config space Mika Westerberg
2018-02-13 17:00 ` [PATCH 06/18] thunderbolt: Wait a bit longer for ICM to authenticate the active NVM Mika Westerberg
2018-02-13 17:21 ` Mario.Limonciello
2018-02-14 10:03 ` Mika Westerberg
2018-02-13 17:00 ` [PATCH 07/18] thunderbolt: Handle rejected Thunderbolt devices Mika Westerberg
2018-02-22 23:17 ` [07/18] " Jeremy McNicoll
2018-02-26 10:20 ` Mika Westerberg
2018-02-26 13:38 ` Mika Westerberg
2018-02-26 19:28 ` Jeremy McNicoll
2018-02-26 19:46 ` Mika Westerberg
2018-02-26 20:15 ` Jeremy McNicoll
2018-02-27 9:26 ` Mika Westerberg
2018-02-27 22:27 ` Jeremy McNicoll
2018-02-13 17:00 ` [PATCH 08/18] thunderbolt: Factor common ICM add and update operations out Mika Westerberg
2018-02-13 17:00 ` [PATCH 09/18] thunderbolt: Correct function name in kernel-doc comment Mika Westerberg
2018-02-13 17:00 ` [PATCH 10/18] thunderbolt: Add tb_switch_get() Mika Westerberg
2018-02-13 17:00 ` [PATCH 11/18] thunderbolt: Add tb_switch_find_by_route() Mika Westerberg
2018-02-13 17:00 ` [PATCH 12/18] thunderbolt: Add tb_xdomain_find_by_route() Mika Westerberg
2018-02-13 17:51 ` Andy Shevchenko
2018-02-14 10:25 ` Mika Westerberg
2018-02-13 17:00 ` [PATCH 13/18] thunderbolt: Add constant for approval timeout Mika Westerberg
2018-02-13 17:00 ` [PATCH 14/18] thunderbolt: Move driver ready handling to struct icm Mika Westerberg
2018-02-13 17:00 ` [PATCH 15/18] thunderbolt: Add 'boot' attribute for devices Mika Westerberg
2018-02-13 17:00 ` [PATCH 16/18] thunderbolt: Add support for preboot ACL Mika Westerberg
2018-02-13 18:19 ` Andy Shevchenko
2018-02-14 10:22 ` Mika Westerberg
2018-02-13 17:00 ` [PATCH 17/18] thunderbolt: Introduce USB only (SL4) security level Mika Westerberg
2018-02-14 0:29 ` Randy Dunlap
2018-02-14 10:09 ` Mika Westerberg
2018-02-13 17:00 ` [PATCH 18/18] thunderbolt: Add support for Intel Titan Ridge Mika Westerberg
2018-02-14 14:23 ` Andy Shevchenko
2018-02-14 14:28 ` Mika Westerberg
2018-02-14 14:29 ` Andy Shevchenko
2018-02-14 15:52 ` Mika Westerberg
2018-02-14 13:58 ` [PATCH 00/18] " Andy Shevchenko
2018-02-14 16:43 ` Mika Westerberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180213170018.9780-1-mika.westerberg@linux.intel.com \
--to=mika.westerberg@linux.intel.com \
--cc=Mario.Limonciello@dell.com \
--cc=andreas.noever@gmail.com \
--cc=bhelgaas@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=michael.jamet@intel.com \
--cc=radion.mirchevsky@intel.com \
--cc=yehezkel.bernat@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).