[PATCH v3 5/7] dt-bindings: tegra: Add documentation for nvidia,tegra194-pmc

Mikko Perttunen
2018-02-15T14:53:30Z

The Tegra194 power management controller has one additional register
aperture to be specified in the device tree node.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt | 2 ++
1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt
index 078a58b0302f..5a3bf7c5a7a0 100644
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt
@@ -3,6 +3,7 @@ NVIDIA Tegra Power Management Controller (PMC)
Required properties:
- compatible: Should contain one of the following:
- "nvidia,tegra186-pmc": for Tegra186
+ - "nvidia,tegra194-pmc": for Tegra194
- reg: Must contain an (offset, length) pair of the register set for each
entry in reg-names.
- reg-names: Must include the following entries:
@@ -10,6 +11,7 @@ Required properties:
- "wake"
- "aotag"
- "scratch"
+ - "misc" (Only for Tegra194)

Optional properties:
- nvidia,invert-interrupt: If present, inverts the PMU interrupt signal.
--
2.16.1