* [PATCH] drm/meson: fix vsync buffer update
@ 2018-02-15 10:19 Neil Armstrong
2018-02-19 15:19 ` Daniel Vetter
0 siblings, 1 reply; 3+ messages in thread
From: Neil Armstrong @ 2018-02-15 10:19 UTC (permalink / raw)
To: airlied
Cc: Neil Armstrong, dri-devel, linux-amlogic, linux-arm-kernel,
linux-kernel, Michal Lazo
The plane buffer address/stride/height was incorrectly updated in the
plane_atomic_update operation instead of the vsync irq.
This patch delays this operation in the vsync irq along with the
other plane delayed setup.
This issue was masked using legacy framebuffer and X11 modesetting, but
is clearly visible using gbm rendering when buffer is submitted late after
vblank, like using software decoding and OpenGL rendering in Kodi.
With this patch, tearing and other artifacts disappears completely.
Cc: Michal Lazo <michal.lazo@gmail.com>
Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/meson/meson_crtc.c | 6 ++++++
drivers/gpu/drm/meson/meson_drv.h | 3 +++
drivers/gpu/drm/meson/meson_plane.c | 7 +++----
3 files changed, 12 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/meson/meson_crtc.c b/drivers/gpu/drm/meson/meson_crtc.c
index 5155f01..0552020 100644
--- a/drivers/gpu/drm/meson/meson_crtc.c
+++ b/drivers/gpu/drm/meson/meson_crtc.c
@@ -36,6 +36,7 @@
#include "meson_venc.h"
#include "meson_vpp.h"
#include "meson_viu.h"
+#include "meson_canvas.h"
#include "meson_registers.h"
/* CRTC definition */
@@ -192,6 +193,11 @@ void meson_crtc_irq(struct meson_drm *priv)
} else
meson_vpp_disable_interlace_vscaler_osd1(priv);
+ meson_canvas_setup(priv, MESON_CANVAS_ID_OSD1,
+ priv->viu.osd1_addr, priv->viu.osd1_stride,
+ priv->viu.osd1_height, MESON_CANVAS_WRAP_NONE,
+ MESON_CANVAS_BLKMODE_LINEAR);
+
/* Enable OSD1 */
writel_bits_relaxed(VPP_OSD1_POSTBLEND, VPP_OSD1_POSTBLEND,
priv->io_base + _REG(VPP_MISC));
diff --git a/drivers/gpu/drm/meson/meson_drv.h b/drivers/gpu/drm/meson/meson_drv.h
index 5e8b392..8450d6ac 100644
--- a/drivers/gpu/drm/meson/meson_drv.h
+++ b/drivers/gpu/drm/meson/meson_drv.h
@@ -43,6 +43,9 @@ struct meson_drm {
bool osd1_commit;
uint32_t osd1_ctrl_stat;
uint32_t osd1_blk0_cfg[5];
+ uint32_t osd1_addr;
+ uint32_t osd1_stride;
+ uint32_t osd1_height;
} viu;
struct {
diff --git a/drivers/gpu/drm/meson/meson_plane.c b/drivers/gpu/drm/meson/meson_plane.c
index d0a6ac8..27bd350 100644
--- a/drivers/gpu/drm/meson/meson_plane.c
+++ b/drivers/gpu/drm/meson/meson_plane.c
@@ -164,10 +164,9 @@ static void meson_plane_atomic_update(struct drm_plane *plane,
/* Update Canvas with buffer address */
gem = drm_fb_cma_get_gem_obj(fb, 0);
- meson_canvas_setup(priv, MESON_CANVAS_ID_OSD1,
- gem->paddr, fb->pitches[0],
- fb->height, MESON_CANVAS_WRAP_NONE,
- MESON_CANVAS_BLKMODE_LINEAR);
+ priv->viu.osd1_addr = gem->paddr;
+ priv->viu.osd1_stride = fb->pitches[0];
+ priv->viu.osd1_height = fb->height;
spin_unlock_irqrestore(&priv->drm->event_lock, flags);
}
--
2.7.4
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH] drm/meson: fix vsync buffer update
2018-02-15 10:19 [PATCH] drm/meson: fix vsync buffer update Neil Armstrong
@ 2018-02-19 15:19 ` Daniel Vetter
2018-02-20 9:04 ` Neil Armstrong
0 siblings, 1 reply; 3+ messages in thread
From: Daniel Vetter @ 2018-02-19 15:19 UTC (permalink / raw)
To: Neil Armstrong
Cc: airlied, linux-kernel, dri-devel, Michal Lazo, linux-amlogic,
linux-arm-kernel
On Thu, Feb 15, 2018 at 11:19:36AM +0100, Neil Armstrong wrote:
> The plane buffer address/stride/height was incorrectly updated in the
> plane_atomic_update operation instead of the vsync irq.
> This patch delays this operation in the vsync irq along with the
> other plane delayed setup.
>
> This issue was masked using legacy framebuffer and X11 modesetting, but
> is clearly visible using gbm rendering when buffer is submitted late after
> vblank, like using software decoding and OpenGL rendering in Kodi.
> With this patch, tearing and other artifacts disappears completely.
You mean the frontbuffer rendering nature of X11 with all it's tearing
made the issue not noticeable? I'm also not clear what you mean with
legacy framebuffer ...
Either way looks reasonable:
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
> Cc: Michal Lazo <michal.lazo@gmail.com>
> Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller")
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
> drivers/gpu/drm/meson/meson_crtc.c | 6 ++++++
> drivers/gpu/drm/meson/meson_drv.h | 3 +++
> drivers/gpu/drm/meson/meson_plane.c | 7 +++----
> 3 files changed, 12 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/meson/meson_crtc.c b/drivers/gpu/drm/meson/meson_crtc.c
> index 5155f01..0552020 100644
> --- a/drivers/gpu/drm/meson/meson_crtc.c
> +++ b/drivers/gpu/drm/meson/meson_crtc.c
> @@ -36,6 +36,7 @@
> #include "meson_venc.h"
> #include "meson_vpp.h"
> #include "meson_viu.h"
> +#include "meson_canvas.h"
> #include "meson_registers.h"
>
> /* CRTC definition */
> @@ -192,6 +193,11 @@ void meson_crtc_irq(struct meson_drm *priv)
> } else
> meson_vpp_disable_interlace_vscaler_osd1(priv);
>
> + meson_canvas_setup(priv, MESON_CANVAS_ID_OSD1,
> + priv->viu.osd1_addr, priv->viu.osd1_stride,
> + priv->viu.osd1_height, MESON_CANVAS_WRAP_NONE,
> + MESON_CANVAS_BLKMODE_LINEAR);
> +
> /* Enable OSD1 */
> writel_bits_relaxed(VPP_OSD1_POSTBLEND, VPP_OSD1_POSTBLEND,
> priv->io_base + _REG(VPP_MISC));
> diff --git a/drivers/gpu/drm/meson/meson_drv.h b/drivers/gpu/drm/meson/meson_drv.h
> index 5e8b392..8450d6ac 100644
> --- a/drivers/gpu/drm/meson/meson_drv.h
> +++ b/drivers/gpu/drm/meson/meson_drv.h
> @@ -43,6 +43,9 @@ struct meson_drm {
> bool osd1_commit;
> uint32_t osd1_ctrl_stat;
> uint32_t osd1_blk0_cfg[5];
> + uint32_t osd1_addr;
> + uint32_t osd1_stride;
> + uint32_t osd1_height;
> } viu;
>
> struct {
> diff --git a/drivers/gpu/drm/meson/meson_plane.c b/drivers/gpu/drm/meson/meson_plane.c
> index d0a6ac8..27bd350 100644
> --- a/drivers/gpu/drm/meson/meson_plane.c
> +++ b/drivers/gpu/drm/meson/meson_plane.c
> @@ -164,10 +164,9 @@ static void meson_plane_atomic_update(struct drm_plane *plane,
> /* Update Canvas with buffer address */
> gem = drm_fb_cma_get_gem_obj(fb, 0);
>
> - meson_canvas_setup(priv, MESON_CANVAS_ID_OSD1,
> - gem->paddr, fb->pitches[0],
> - fb->height, MESON_CANVAS_WRAP_NONE,
> - MESON_CANVAS_BLKMODE_LINEAR);
> + priv->viu.osd1_addr = gem->paddr;
> + priv->viu.osd1_stride = fb->pitches[0];
> + priv->viu.osd1_height = fb->height;
>
> spin_unlock_irqrestore(&priv->drm->event_lock, flags);
> }
> --
> 2.7.4
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH] drm/meson: fix vsync buffer update
2018-02-19 15:19 ` Daniel Vetter
@ 2018-02-20 9:04 ` Neil Armstrong
0 siblings, 0 replies; 3+ messages in thread
From: Neil Armstrong @ 2018-02-20 9:04 UTC (permalink / raw)
To: airlied, linux-kernel, dri-devel, Michal Lazo, linux-amlogic,
linux-arm-kernel
On 19/02/2018 16:19, Daniel Vetter wrote:
> On Thu, Feb 15, 2018 at 11:19:36AM +0100, Neil Armstrong wrote:
>> The plane buffer address/stride/height was incorrectly updated in the
>> plane_atomic_update operation instead of the vsync irq.
>> This patch delays this operation in the vsync irq along with the
>> other plane delayed setup.
>>
>> This issue was masked using legacy framebuffer and X11 modesetting, but
>> is clearly visible using gbm rendering when buffer is submitted late after
>> vblank, like using software decoding and OpenGL rendering in Kodi.
>> With this patch, tearing and other artifacts disappears completely.
>
> You mean the frontbuffer rendering nature of X11 with all it's tearing
> made the issue not noticeable? I'm also not clear what you mean with
> legacy framebuffer ...
Yeah I don't have to correct technical terms, sorry.
>
> Either way looks reasonable:
> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Thanks,
Pushed to drm-misc-fixes.
Neil
>
>> Cc: Michal Lazo <michal.lazo@gmail.com>
>> Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller")
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>> ---
>> drivers/gpu/drm/meson/meson_crtc.c | 6 ++++++
>> drivers/gpu/drm/meson/meson_drv.h | 3 +++
>> drivers/gpu/drm/meson/meson_plane.c | 7 +++----
>> 3 files changed, 12 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/meson/meson_crtc.c b/drivers/gpu/drm/meson/meson_crtc.c
>> index 5155f01..0552020 100644
>> --- a/drivers/gpu/drm/meson/meson_crtc.c
>> +++ b/drivers/gpu/drm/meson/meson_crtc.c
>> @@ -36,6 +36,7 @@
>> #include "meson_venc.h"
>> #include "meson_vpp.h"
>> #include "meson_viu.h"
>> +#include "meson_canvas.h"
>> #include "meson_registers.h"
>>
>> /* CRTC definition */
>> @@ -192,6 +193,11 @@ void meson_crtc_irq(struct meson_drm *priv)
>> } else
>> meson_vpp_disable_interlace_vscaler_osd1(priv);
>>
>> + meson_canvas_setup(priv, MESON_CANVAS_ID_OSD1,
>> + priv->viu.osd1_addr, priv->viu.osd1_stride,
>> + priv->viu.osd1_height, MESON_CANVAS_WRAP_NONE,
>> + MESON_CANVAS_BLKMODE_LINEAR);
>> +
>> /* Enable OSD1 */
>> writel_bits_relaxed(VPP_OSD1_POSTBLEND, VPP_OSD1_POSTBLEND,
>> priv->io_base + _REG(VPP_MISC));
>> diff --git a/drivers/gpu/drm/meson/meson_drv.h b/drivers/gpu/drm/meson/meson_drv.h
>> index 5e8b392..8450d6ac 100644
>> --- a/drivers/gpu/drm/meson/meson_drv.h
>> +++ b/drivers/gpu/drm/meson/meson_drv.h
>> @@ -43,6 +43,9 @@ struct meson_drm {
>> bool osd1_commit;
>> uint32_t osd1_ctrl_stat;
>> uint32_t osd1_blk0_cfg[5];
>> + uint32_t osd1_addr;
>> + uint32_t osd1_stride;
>> + uint32_t osd1_height;
>> } viu;
>>
>> struct {
>> diff --git a/drivers/gpu/drm/meson/meson_plane.c b/drivers/gpu/drm/meson/meson_plane.c
>> index d0a6ac8..27bd350 100644
>> --- a/drivers/gpu/drm/meson/meson_plane.c
>> +++ b/drivers/gpu/drm/meson/meson_plane.c
>> @@ -164,10 +164,9 @@ static void meson_plane_atomic_update(struct drm_plane *plane,
>> /* Update Canvas with buffer address */
>> gem = drm_fb_cma_get_gem_obj(fb, 0);
>>
>> - meson_canvas_setup(priv, MESON_CANVAS_ID_OSD1,
>> - gem->paddr, fb->pitches[0],
>> - fb->height, MESON_CANVAS_WRAP_NONE,
>> - MESON_CANVAS_BLKMODE_LINEAR);
>> + priv->viu.osd1_addr = gem->paddr;
>> + priv->viu.osd1_stride = fb->pitches[0];
>> + priv->viu.osd1_height = fb->height;
>>
>> spin_unlock_irqrestore(&priv->drm->event_lock, flags);
>> }
>> --
>> 2.7.4
>>
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel@lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/dri-devel
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-02-20 9:05 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-02-15 10:19 [PATCH] drm/meson: fix vsync buffer update Neil Armstrong
2018-02-19 15:19 ` Daniel Vetter
2018-02-20 9:04 ` Neil Armstrong
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox