From: Lukas Wunner <lukas@wunner.de>
To: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: mjg59@srcf.ucam.org, pali.rohar@gmail.com, dvhart@infradead.org,
andy@infradead.org, mario.limonciello@dell.com, tiwai@suse.com,
alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org,
platform-driver-x86@vger.kernel.org
Subject: Re: [alsa-devel] [PATCH v2 3/3] ALSA: hda: Disabled unused audio controller for Dell platforms with Switchable Graphics
Date: Thu, 8 Mar 2018 10:38:48 +0100 [thread overview]
Message-ID: <20180308093848.GA24068@wunner.de> (raw)
In-Reply-To: <20180308091023.9061-3-kai.heng.feng@canonical.com>
On Thu, Mar 08, 2018 at 05:10:23PM +0800, Kai-Heng Feng wrote:
> Some Dell platforms (Preicsion 7510/7710/7520/7720) have a BIOS option
> "Switchable Graphics" (SG).
>
> When SG is enabled, we have:
> 00:02.0 VGA compatible controller: Intel Corporation Device 591b (rev 04)
> 00:1f.3 Audio device: Intel Corporation CM238 HD Audio Controller (rev 31)
> 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Polaris10]
> 01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 580]
>
> The Intel Audio outputs all the sound, including HDMI audio. The audio
> controller comes with AMD graphics doesn't get used.
>
> When SG is disabled, we have:
> 00:1f.3 Audio device: Intel Corporation CM238 HD Audio Controller (rev 31)
> 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Polaris10]
> 01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 580]
>
> Now it's a typical discrete-only system. HDMI audio comes from AMD audio
> controller, others from Intel audio controller.
>
> When SG is enabled, the unused AMD audio controller still exposes its
> sysfs, so userspace still opens the control file and stream. If
> userspace tries to output sound through the stream, it hangs when
> runtime suspend kicks in:
> [ 12.796265] snd_hda_intel 0000:01:00.1: Disabling via vga_switcheroo
> [ 12.796367] snd_hda_intel 0000:01:00.1: Cannot lock devices!
This should be fixed by the following series:
https://lists.freedesktop.org/archives/dri-devel/2018-March/168012.html
Please verify that by testing the series on the machine in question.
I'm hoping to get those patches in for 4.17. I suspect that your
patch may not be necessary then.
> Since the discrete audio controller isn't useful when SG enabled, we
> should just disable the device.
I don't quite follow, when SG is enabled but hda_intel doesn't bind
to the AMD audio device, how are you going to stream audio to
external displays? Are external DP/HDMI ports muxed to the integrated
GPU when SG is enabled?
Thanks,
Lukas
>
> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
> ---
> v2: Mario suggested to squash the HDA part into the same series.
>
> sound/pci/hda/hda_intel.c | 35 +++++++++++++++++++++++++++++++++++
> 1 file changed, 35 insertions(+)
>
> diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
> index 96143df19b21..8e3e8b88624a 100644
> --- a/sound/pci/hda/hda_intel.c
> +++ b/sound/pci/hda/hda_intel.c
> @@ -49,6 +49,7 @@
> #include <linux/clocksource.h>
> #include <linux/time.h>
> #include <linux/completion.h>
> +#include <linux/dell-common.h>
>
> #ifdef CONFIG_X86
> /* for snoop control */
> @@ -1620,6 +1621,35 @@ static void check_msi(struct azx *chip)
> }
> }
>
> +#if IS_ENABLED(CONFIG_DELL_LAPTOP)
> +static bool check_dell_switchable_gfx(struct pci_dev *pdev)
> +{
> + static int (*dell_switchable_gfx_enabled_func)(bool *);
> + bool enabled;
> + int err;
> +
> + if (pdev->vendor != PCI_VENDOR_ID_ATI ||
> + pdev->subsystem_vendor != PCI_VENDOR_ID_DELL)
> + return false;
> +
> + dell_switchable_gfx_enabled_func =
> + symbol_request(dell_switchable_gfx_enabled);
> + if (!dell_switchable_gfx_enabled_func)
> + return false;
> +
> + err = dell_switchable_gfx_enabled_func(&enabled);
> +
> + symbol_put(dell_switchable_gfx_enabled);
> +
> + return !err ? enabled : false;
> +}
> +#else
> +static bool check_dell_switchable_gfx(struct pci_dev *pdev)
> +{
> + return false;
> +}
> +#endif
> +
> /* check the snoop mode availability */
> static void azx_check_snoop_available(struct azx *chip)
> {
> @@ -1702,6 +1732,11 @@ static int azx_create(struct snd_card *card, struct pci_dev *pci,
> if (err < 0)
> return err;
>
> + if (check_dell_switchable_gfx(pci)) {
> + pci_disable_device(pci);
> + return -ENODEV;
> + }
> +
> hda = kzalloc(sizeof(*hda), GFP_KERNEL);
> if (!hda) {
> pci_disable_device(pci);
> --
> 2.15.1
>
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
next prev parent reply other threads:[~2018-03-08 9:38 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-08 9:10 [PATCH v2 1/3] dell-led: Change dell-led.h to dell-common.h Kai-Heng Feng
2018-03-08 9:10 ` [PATCH v2 2/3] platform/x86: dell-*: Add interface for switchable graphics status query Kai-Heng Feng
2018-03-08 16:38 ` Pali Rohár
2018-03-09 8:14 ` Kai Heng Feng
2018-03-08 9:10 ` [PATCH v2 3/3] ALSA: hda: Disabled unused audio controller for Dell platforms with Switchable Graphics Kai-Heng Feng
2018-03-08 9:38 ` Lukas Wunner [this message]
2018-03-08 10:38 ` [alsa-devel] " Kai Heng Feng
2018-03-08 11:30 ` Lukas Wunner
2018-03-09 8:22 ` Kai Heng Feng
2018-03-09 9:02 ` Pali Rohár
2018-03-09 9:30 ` Kai Heng Feng
2018-03-09 9:34 ` Mario.Limonciello
2018-03-09 9:46 ` Pali Rohár
2018-03-09 9:59 ` Mario.Limonciello
2018-03-10 10:38 ` Pali Rohár
2018-03-11 14:03 ` Mario.Limonciello
2018-03-11 14:30 ` Pali Rohár
2018-03-12 1:30 ` Mario.Limonciello
2018-03-13 7:56 ` Kai Heng Feng
2018-03-13 8:13 ` Mario.Limonciello
2018-03-10 6:50 ` Lukas Wunner
2018-03-10 10:40 ` Pali Rohár
2018-03-11 14:06 ` Mario.Limonciello
2018-03-13 8:24 ` Kai Heng Feng
2018-04-07 16:44 ` [PATCH v2 1/3] dell-led: Change dell-led.h to dell-common.h Darren Hart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180308093848.GA24068@wunner.de \
--to=lukas@wunner.de \
--cc=alsa-devel@alsa-project.org \
--cc=andy@infradead.org \
--cc=dvhart@infradead.org \
--cc=kai.heng.feng@canonical.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mario.limonciello@dell.com \
--cc=mjg59@srcf.ucam.org \
--cc=pali.rohar@gmail.com \
--cc=platform-driver-x86@vger.kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox