* [PATCH v5] Staging: iio: adis16209: Change some macro names
@ 2018-03-10 10:10 Shreeya Patel
2018-03-10 15:43 ` Jonathan Cameron
0 siblings, 1 reply; 2+ messages in thread
From: Shreeya Patel @ 2018-03-10 10:10 UTC (permalink / raw)
To: lars, Michael.Hennerich, jic23, knaack.h, pmeerw, gregkh,
linux-iio, devel, linux-kernel, daniel.baluta
Cc: Shreeya Patel
Make some of the macro names according to the names
given in the datasheet of the adis16209 driver and
have slight indentation in field definitions to make
them clearly different from the register addresses.
Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
---
Changes in v5
-Re-send the corrected patch.
drivers/staging/iio/accel/adis16209.c | 48 +++++++++++++++++------------------
1 file changed, 24 insertions(+), 24 deletions(-)
diff --git a/drivers/staging/iio/accel/adis16209.c b/drivers/staging/iio/accel/adis16209.c
index d8aef9c..ed2e89f 100644
--- a/drivers/staging/iio/accel/adis16209.c
+++ b/drivers/staging/iio/accel/adis16209.c
@@ -68,21 +68,21 @@
#define ADIS16209_MSC_CTRL_ACTIVE_HIGH BIT(1)
#define ADIS16209_MSC_CTRL_DATA_RDY_DIO2 BIT(0)
-#define ADIS16209_DIAG_STAT_REG 0x3C
-#define ADIS16209_DIAG_STAT_ALARM2 BIT(9)
-#define ADIS16209_DIAG_STAT_ALARM1 BIT(8)
-#define ADIS16209_DIAG_STAT_SELFTEST_FAIL_BIT 5
-#define ADIS16209_DIAG_STAT_SPI_FAIL_BIT 3
-#define ADIS16209_DIAG_STAT_FLASH_UPT_BIT 2
+#define ADIS16209_STAT_REG 0x3C
+#define ADIS16209_STAT_ALARM2 BIT(9)
+#define ADIS16209_STAT_ALARM1 BIT(8)
+#define ADIS16209_STAT_SELFTEST_FAIL_BIT 5
+#define ADIS16209_STAT_SPI_FAIL_BIT 3
+#define ADIS16209_STAT_FLASH_UPT_FAIL_BIT 2
/* Power supply above 3.625 V */
-#define ADIS16209_DIAG_STAT_POWER_HIGH_BIT 1
+#define ADIS16209_STAT_POWER_HIGH_BIT 1
/* Power supply below 3.15 V */
-#define ADIS16209_DIAG_STAT_POWER_LOW_BIT 0
+#define ADIS16209_STAT_POWER_LOW_BIT 0
-#define ADIS16209_GLOB_CMD_REG 0x3E
-#define ADIS16209_GLOB_CMD_SW_RESET BIT(7)
-#define ADIS16209_GLOB_CMD_CLEAR_STAT BIT(4)
-#define ADIS16209_GLOB_CMD_FACTORY_CAL BIT(1)
+#define ADIS16209_CMD_REG 0x3E
+#define ADIS16209_CMD_SW_RESET BIT(7)
+#define ADIS16209_CMD_CLEAR_STAT BIT(4)
+#define ADIS16209_CMD_FACTORY_CAL BIT(1)
#define ADIS16209_ERROR_ACTIVE BIT(14)
@@ -238,29 +238,29 @@ static const struct iio_info adis16209_info = {
};
static const char * const adis16209_status_error_msgs[] = {
- [ADIS16209_DIAG_STAT_SELFTEST_FAIL_BIT] = "Self test failure",
- [ADIS16209_DIAG_STAT_SPI_FAIL_BIT] = "SPI failure",
- [ADIS16209_DIAG_STAT_FLASH_UPT_BIT] = "Flash update failed",
- [ADIS16209_DIAG_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
- [ADIS16209_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 3.15V",
+ [ADIS16209_STAT_SELFTEST_FAIL_BIT] = "Self test failure",
+ [ADIS16209_STAT_SPI_FAIL_BIT] = "SPI failure",
+ [ADIS16209_STAT_FLASH_UPT_FAIL_BIT] = "Flash update failed",
+ [ADIS16209_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
+ [ADIS16209_STAT_POWER_LOW_BIT] = "Power supply below 3.15V",
};
static const struct adis_data adis16209_data = {
.read_delay = 30,
.msc_ctrl_reg = ADIS16209_MSC_CTRL_REG,
- .glob_cmd_reg = ADIS16209_GLOB_CMD_REG,
- .diag_stat_reg = ADIS16209_DIAG_STAT_REG,
+ .glob_cmd_reg = ADIS16209_CMD_REG,
+ .diag_stat_reg = ADIS16209_STAT_REG,
.self_test_mask = ADIS16209_MSC_CTRL_SELF_TEST_EN,
.self_test_no_autoclear = true,
.startup_delay = ADIS16209_STARTUP_DELAY_MS,
.status_error_msgs = adis16209_status_error_msgs,
- .status_error_mask = BIT(ADIS16209_DIAG_STAT_SELFTEST_FAIL_BIT) |
- BIT(ADIS16209_DIAG_STAT_SPI_FAIL_BIT) |
- BIT(ADIS16209_DIAG_STAT_FLASH_UPT_BIT) |
- BIT(ADIS16209_DIAG_STAT_POWER_HIGH_BIT) |
- BIT(ADIS16209_DIAG_STAT_POWER_LOW_BIT),
+ .status_error_mask = BIT(ADIS16209_STAT_SELFTEST_FAIL_BIT) |
+ BIT(ADIS16209_STAT_SPI_FAIL_BIT) |
+ BIT(ADIS16209_STAT_FLASH_UPT_FAIL_BIT) |
+ BIT(ADIS16209_STAT_POWER_HIGH_BIT) |
+ BIT(ADIS16209_STAT_POWER_LOW_BIT),
};
static int adis16209_probe(struct spi_device *spi)
--
2.7.4
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 2+ messages in thread* Re: [PATCH v5] Staging: iio: adis16209: Change some macro names
2018-03-10 10:10 [PATCH v5] Staging: iio: adis16209: Change some macro names Shreeya Patel
@ 2018-03-10 15:43 ` Jonathan Cameron
0 siblings, 0 replies; 2+ messages in thread
From: Jonathan Cameron @ 2018-03-10 15:43 UTC (permalink / raw)
To: Shreeya Patel
Cc: lars, Michael.Hennerich, knaack.h, pmeerw, gregkh, linux-iio,
devel, linux-kernel, daniel.baluta
On Sat, 10 Mar 2018 15:40:14 +0530
Shreeya Patel <shreeya.patel23498@gmail.com> wrote:
> Make some of the macro names according to the names
> given in the datasheet of the adis16209 driver and
> have slight indentation in field definitions to make
> them clearly different from the register addresses.
>
> Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
I applied an earlier version so this should have been an
incremental patch not a new version of that one.
I have since pushed a tree out with that patch and it's a non
rebasing tree (as others may be basing their patches on it).
Hence please send a new patch to just make the indentation changes.
Thanks,
Jonathan
> ---
>
> Changes in v5
> -Re-send the corrected patch.
Please keep previous change lot here as well.
>
> drivers/staging/iio/accel/adis16209.c | 48 +++++++++++++++++------------------
> 1 file changed, 24 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/staging/iio/accel/adis16209.c b/drivers/staging/iio/accel/adis16209.c
> index d8aef9c..ed2e89f 100644
> --- a/drivers/staging/iio/accel/adis16209.c
> +++ b/drivers/staging/iio/accel/adis16209.c
> @@ -68,21 +68,21 @@
> #define ADIS16209_MSC_CTRL_ACTIVE_HIGH BIT(1)
> #define ADIS16209_MSC_CTRL_DATA_RDY_DIO2 BIT(0)
>
> -#define ADIS16209_DIAG_STAT_REG 0x3C
> -#define ADIS16209_DIAG_STAT_ALARM2 BIT(9)
> -#define ADIS16209_DIAG_STAT_ALARM1 BIT(8)
> -#define ADIS16209_DIAG_STAT_SELFTEST_FAIL_BIT 5
> -#define ADIS16209_DIAG_STAT_SPI_FAIL_BIT 3
> -#define ADIS16209_DIAG_STAT_FLASH_UPT_BIT 2
> +#define ADIS16209_STAT_REG 0x3C
> +#define ADIS16209_STAT_ALARM2 BIT(9)
> +#define ADIS16209_STAT_ALARM1 BIT(8)
> +#define ADIS16209_STAT_SELFTEST_FAIL_BIT 5
> +#define ADIS16209_STAT_SPI_FAIL_BIT 3
> +#define ADIS16209_STAT_FLASH_UPT_FAIL_BIT 2
> /* Power supply above 3.625 V */
> -#define ADIS16209_DIAG_STAT_POWER_HIGH_BIT 1
> +#define ADIS16209_STAT_POWER_HIGH_BIT 1
> /* Power supply below 3.15 V */
> -#define ADIS16209_DIAG_STAT_POWER_LOW_BIT 0
> +#define ADIS16209_STAT_POWER_LOW_BIT 0
>
> -#define ADIS16209_GLOB_CMD_REG 0x3E
> -#define ADIS16209_GLOB_CMD_SW_RESET BIT(7)
> -#define ADIS16209_GLOB_CMD_CLEAR_STAT BIT(4)
> -#define ADIS16209_GLOB_CMD_FACTORY_CAL BIT(1)
> +#define ADIS16209_CMD_REG 0x3E
> +#define ADIS16209_CMD_SW_RESET BIT(7)
> +#define ADIS16209_CMD_CLEAR_STAT BIT(4)
> +#define ADIS16209_CMD_FACTORY_CAL BIT(1)
>
> #define ADIS16209_ERROR_ACTIVE BIT(14)
>
> @@ -238,29 +238,29 @@ static const struct iio_info adis16209_info = {
> };
>
> static const char * const adis16209_status_error_msgs[] = {
> - [ADIS16209_DIAG_STAT_SELFTEST_FAIL_BIT] = "Self test failure",
> - [ADIS16209_DIAG_STAT_SPI_FAIL_BIT] = "SPI failure",
> - [ADIS16209_DIAG_STAT_FLASH_UPT_BIT] = "Flash update failed",
> - [ADIS16209_DIAG_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
> - [ADIS16209_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 3.15V",
> + [ADIS16209_STAT_SELFTEST_FAIL_BIT] = "Self test failure",
> + [ADIS16209_STAT_SPI_FAIL_BIT] = "SPI failure",
> + [ADIS16209_STAT_FLASH_UPT_FAIL_BIT] = "Flash update failed",
> + [ADIS16209_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
> + [ADIS16209_STAT_POWER_LOW_BIT] = "Power supply below 3.15V",
> };
>
> static const struct adis_data adis16209_data = {
> .read_delay = 30,
> .msc_ctrl_reg = ADIS16209_MSC_CTRL_REG,
> - .glob_cmd_reg = ADIS16209_GLOB_CMD_REG,
> - .diag_stat_reg = ADIS16209_DIAG_STAT_REG,
> + .glob_cmd_reg = ADIS16209_CMD_REG,
> + .diag_stat_reg = ADIS16209_STAT_REG,
>
> .self_test_mask = ADIS16209_MSC_CTRL_SELF_TEST_EN,
> .self_test_no_autoclear = true,
> .startup_delay = ADIS16209_STARTUP_DELAY_MS,
>
> .status_error_msgs = adis16209_status_error_msgs,
> - .status_error_mask = BIT(ADIS16209_DIAG_STAT_SELFTEST_FAIL_BIT) |
> - BIT(ADIS16209_DIAG_STAT_SPI_FAIL_BIT) |
> - BIT(ADIS16209_DIAG_STAT_FLASH_UPT_BIT) |
> - BIT(ADIS16209_DIAG_STAT_POWER_HIGH_BIT) |
> - BIT(ADIS16209_DIAG_STAT_POWER_LOW_BIT),
> + .status_error_mask = BIT(ADIS16209_STAT_SELFTEST_FAIL_BIT) |
> + BIT(ADIS16209_STAT_SPI_FAIL_BIT) |
> + BIT(ADIS16209_STAT_FLASH_UPT_FAIL_BIT) |
> + BIT(ADIS16209_STAT_POWER_HIGH_BIT) |
> + BIT(ADIS16209_STAT_POWER_LOW_BIT),
> };
>
> static int adis16209_probe(struct spi_device *spi)
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2018-03-10 15:43 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-03-10 10:10 [PATCH v5] Staging: iio: adis16209: Change some macro names Shreeya Patel
2018-03-10 15:43 ` Jonathan Cameron
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox