From: Marcus Folkesson <marcus.folkesson@gmail.com>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Arvind Yadav <arvind.yadav.cs@gmail.com>
Cc: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: Fix deadlocks in autosuspend
Date: Fri, 16 Mar 2018 14:41:36 +0100 [thread overview]
Message-ID: <20180316134136.GC31029@gmail.com> (raw)
In-Reply-To: <20180228133803.30040-1-marcus.folkesson@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 3659 bytes --]
Ping.
Would someone please have a look?
Thanks,
Marcus Folkesson
On Wed, Feb 28, 2018 at 02:37:57PM +0100, Marcus Folkesson wrote:
> Hello,
>
> I have not recieved any feedback on these so I resend them.
>
> I got this deadlock on my own driver (pxrc) when using the same
> construction.
>
> Please have a look
>
> Here is a clip from
> [PATCH v3] input: pxrc: new driver for PhoenixRC Flight Controller Adapter [1]
> that describes the problem.
>
> -------------------------------8<----------------------------------------------
> Also, I think we have a deadlock in the synaptics_usb driver.
>
> When the device is suspended and someone is open the device, the input
> subsystem will call input_open_device() which takes the
> input_dev->mutex and then call input_dev->open().
>
> synusb_open() has a call to usb_autopm_get_interface() which will
> result in a call to the registered resume-function if the device is
> suspended. (see Documentation/driver-api/usb/power-manaement.rst).
>
> In the case of snaptics_usb, it will take the input_dev->mutex in the
> resume function.
>
> I have no synaptic mouse, but tested to put the same code into my
> driver just to confirm, and got the following dump:
>
> [ 9215.626476] INFO: task input-events:8590 blocked for more than 120 seconds.
> [ 9215.626495] Not tainted 4.15.0-rc8-ARCH+ #6
> [ 9215.626500] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> [ 9215.626507] input-events D 0 8590 4394 0x00000004
> [ 9215.626520] Call Trace:
> [ 9215.626546] ? __schedule+0x236/0x850
> [ 9215.626559] schedule+0x2f/0x90
> [ 9215.626569] schedule_preempt_disabled+0x11/0x20
> [ 9215.626579] __mutex_lock.isra.0+0x1aa/0x520
> [ 9215.626609] ? usb_runtime_suspend+0x70/0x70 [usbcore]
> [ 9215.626622] ? pxrc_resume+0x37/0x70 [pxrc]
> [ 9215.626632] pxrc_resume+0x37/0x70 [pxrc]
> [ 9215.626655] usb_resume_interface.isra.2+0x39/0xe0 [usbcore]
> [ 9215.626676] usb_resume_both+0xd2/0x120 [usbcore]
> [ 9215.626688] __rpm_callback+0xb6/0x1f0
> [ 9215.626699] rpm_callback+0x1f/0x70
> [ 9215.626718] ? usb_runtime_suspend+0x70/0x70 [usbcore]
> [ 9215.626726] rpm_resume+0x4e2/0x7f0
> [ 9215.626737] rpm_resume+0x582/0x7f0
> [ 9215.626749] __pm_runtime_resume+0x3a/0x50
> [ 9215.626767] usb_autopm_get_interface+0x1d/0x50 [usbcore]
> [ 9215.626780] pxrc_open+0x17/0x8d [pxrc]
> [ 9215.626791] input_open_device+0x70/0xa0
> [ 9215.626804] evdev_open+0x183/0x1c0 [evdev]
> [ 9215.626819] chrdev_open+0xa0/0x1b0
> [ 9215.626830] ? cdev_put.part.1+0x20/0x20
> [ 9215.626840] do_dentry_open+0x1ad/0x2c0
> [ 9215.626855] path_openat+0x576/0x1300
> [ 9215.626868] ? alloc_set_pte+0x22c/0x520
> [ 9215.626883] ? filemap_map_pages+0x19b/0x340
> [ 9215.626893] do_filp_open+0x9b/0x110
> [ 9215.626908] ? __check_object_size+0x9d/0x190
> [ 9215.626920] ? __alloc_fd+0xaf/0x160
> [ 9215.626931] ? do_sys_open+0x1bd/0x250
> [ 9215.626942] do_sys_open+0x1bd/0x250
> [ 9215.626956] entry_SYSCALL_64_fastpath+0x20/0x83
> [ 9215.626967] RIP: 0033:0x7fbf6358f7ae
>
>
> tablet/pegasus_notetaker.c and touchscreen/usbtouchscreen.c has the same
> construction (taking input_dev->mutex in resume/suspend and call
> usb_autopm_get_interface() in open()).
>
> I will create a separate "pm_mutex" to use instead of input_dev->mutex
> to get rid of the lockups in those drivers
>
> -------------------------------8<----------------------------------------------
>
>
> [1] https://lkml.org/lkml/2018/1/20/191
>
> Thanks,
>
> Best regards
> Marcus Folkesson
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
prev parent reply other threads:[~2018-03-16 13:41 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-28 13:37 Fix deadlocks in autosuspend Marcus Folkesson
2018-02-28 13:37 ` [RESEND PATCH 1/6] input: synaptics_usb: fix deadlock " Marcus Folkesson
2018-03-17 18:10 ` Dmitry Torokhov
2018-02-28 13:37 ` [RESEND PATCH 2/6] input: synaptics_usb: do not rely on input_dev->users Marcus Folkesson
2018-03-17 18:10 ` Dmitry Torokhov
2018-02-28 13:38 ` [RESEND PATCH 3/6] input: pagasus_notetaker: fix deadlock in autosuspend Marcus Folkesson
2018-03-17 18:10 ` Dmitry Torokhov
2018-02-28 13:38 ` [RESEND PATCH 4/6] input: pegasus_notetaker: do not rely on input_dev->users Marcus Folkesson
2018-03-17 18:11 ` Dmitry Torokhov
2018-02-28 13:38 ` [RESEND PATCH 5/6] input: usbtouchscreen: fix deadlock in autosuspend Marcus Folkesson
2018-03-17 18:11 ` Dmitry Torokhov
2018-02-28 13:38 ` [RESEND PATCH 6/6] input: usbtouchscreen: do not rely on input_dev->users Marcus Folkesson
2018-03-17 18:11 ` Dmitry Torokhov
2018-03-16 13:41 ` Marcus Folkesson [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180316134136.GC31029@gmail.com \
--to=marcus.folkesson@gmail.com \
--cc=arvind.yadav.cs@gmail.com \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox