linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v1] phy: Add QMP phy based UFS phy support for sdm845.
@ 2018-03-20  7:43 Can Guo
  2018-03-20 10:07 ` Vivek Gautam
  0 siblings, 1 reply; 3+ messages in thread
From: Can Guo @ 2018-03-20  7:43 UTC (permalink / raw)
  To: subhashj, asutoshd, vivek.gautam, mgautam, kishon; +Cc: linux-kernel, Can Guo

Add UFS PHY support to make SDM845 UFS work with common PHY framework.

Signed-off-by: Can Guo <cang@codeaurora.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp.c | 120 +++++++++++++++++++++++++++++++++++-
 drivers/phy/qualcomm/phy-qcom-qmp.h |   8 +++
 2 files changed, 126 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 6470c5d..aeb2377 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -156,6 +156,11 @@ enum qphy_reg_layout {
 	[QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x170,
 };
 
+static const unsigned int sdm845_ufsphy_regs_layout[] = {
+	[QPHY_START_CTRL]		= 0x00,
+	[QPHY_PCS_READY_STATUS]		= 0x168,
+};
+
 static const struct qmp_phy_init_tbl msm8996_pcie_serdes_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x1c),
 	QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
@@ -490,6 +495,74 @@ enum qphy_reg_layout {
 	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
 };
 
+static const struct qmp_phy_init_tbl sdm845_ufsphy_serdes_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0xd5),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_CTRL, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x05),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL1, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL2, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xda),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0c),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE1, 0x98),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE1, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE1, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE1, 0x36),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE1, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE1, 0xc1),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE1, 0x32),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE1, 0x0f),
+
+	/* Rate B */
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x44),
+};
+
+static const struct qmp_phy_init_tbl sdm845_ufsphy_tx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
+};
+
+static const struct qmp_phy_init_tbl sdm845_ufsphy_rx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_LVL, 0x24),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_TERM_BW, 0x5b),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1d),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_QUARTER, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x81),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
+};
+
+static const struct qmp_phy_init_tbl sdm845_ufsphy_pcs_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_DOWN_CONTROL, 0x01),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_MULTI_LANE_CTRL1, 0x02),
+};
+
 /* struct qmp_phy_cfg - per-PHY initialization config */
 struct qmp_phy_cfg {
 	/* phy-type - PCIE/UFS/USB */
@@ -540,6 +613,9 @@ struct qmp_phy_cfg {
 	/* Register offset of secondary tx/rx lanes for USB DP combo PHY */
 	unsigned int tx_b_lane_offset;
 	unsigned int rx_b_lane_offset;
+
+	/* true, if PCS block has a separate SW_RESET register */
+	bool has_sw_rst;
 };
 
 /**
@@ -636,6 +712,10 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
 	"aux", "cfg_ahb", "ref", "com_aux",
 };
 
+static const char * const sdm845_ufs_phy_clk_l[] = {
+	"ref_clk", "ref_aux_clk",
+};
+
 /* list of resets */
 static const char * const msm8996_pciephy_reset_l[] = {
 	"phy", "common", "cfg",
@@ -650,6 +730,10 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
 	"vdda-phy", "vdda-pll",
 };
 
+static const char * const sdm845_phy_vreg_l[] = {
+	"vdda-phy", "vdda-pll",
+};
+
 static const struct qmp_phy_cfg msm8996_pciephy_cfg = {
 	.type			= PHY_TYPE_PCIE,
 	.nlanes			= 3,
@@ -679,6 +763,7 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
 	.has_pwrdn_delay	= true,
 	.pwrdn_delay_min	= POWER_DOWN_DELAY_US_MIN,
 	.pwrdn_delay_max	= POWER_DOWN_DELAY_US_MAX,
+	.has_sw_rst		= true,
 };
 
 static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {
@@ -704,6 +789,7 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
 	.start_ctrl		= SERDES_START | PCS_START,
 	.pwrdn_ctrl		= SW_PWRDN,
 	.mask_pcs_ready		= PHYSTATUS,
+	.has_sw_rst		= true,
 };
 
 /* list of resets */
@@ -740,6 +826,7 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
 	.has_pwrdn_delay	= true,
 	.pwrdn_delay_min	= 995,		/* us */
 	.pwrdn_delay_max	= 1005,		/* us */
+	.has_sw_rst		= true,
 };
 
 static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = {
@@ -772,6 +859,30 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
 	.has_phy_dp_com_ctrl	= true,
 	.tx_b_lane_offset	= 0x400,
 	.rx_b_lane_offset	= 0x400,
+	.has_sw_rst		= true,
+};
+
+static const struct qmp_phy_cfg sdm845_ufsphy_cfg = {
+	.type			= PHY_TYPE_UFS,
+	.nlanes			= 2,
+
+	.serdes_tbl		= sdm845_ufsphy_serdes_tbl,
+	.serdes_tbl_num		= ARRAY_SIZE(sdm845_ufsphy_serdes_tbl),
+	.tx_tbl			= sdm845_ufsphy_tx_tbl,
+	.tx_tbl_num		= ARRAY_SIZE(sdm845_ufsphy_tx_tbl),
+	.rx_tbl			= sdm845_ufsphy_rx_tbl,
+	.rx_tbl_num		= ARRAY_SIZE(sdm845_ufsphy_rx_tbl),
+	.pcs_tbl		= sdm845_ufsphy_pcs_tbl,
+	.pcs_tbl_num		= ARRAY_SIZE(sdm845_ufsphy_pcs_tbl),
+	.clk_list		= sdm845_ufs_phy_clk_l,
+	.num_clks		= ARRAY_SIZE(sdm845_ufs_phy_clk_l),
+	.vreg_list		= sdm845_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(sdm845_phy_vreg_l),
+	.regs			= sdm845_ufsphy_regs_layout,
+
+	.start_ctrl		= SERDES_START,
+	.pwrdn_ctrl		= SW_PWRDN,
+	.mask_pcs_ready		= PCS_READY,
 };
 
 static void qcom_qmp_phy_configure(void __iomem *base,
@@ -998,7 +1109,8 @@ static int qcom_qmp_phy_init(struct phy *phy)
 		usleep_range(cfg->pwrdn_delay_min, cfg->pwrdn_delay_max);
 
 	/* Pull PHY out of reset state */
-	qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
+	if (cfg->has_sw_rst)
+		qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
 	if (cfg->has_phy_dp_com_ctrl)
 		qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET);
 
@@ -1036,7 +1148,8 @@ static int qcom_qmp_phy_exit(struct phy *phy)
 	clk_disable_unprepare(qphy->pipe_clk);
 
 	/* PHY reset */
-	qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
+	if (cfg->has_sw_rst)
+		qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
 
 	/* stop SerDes and Phy-Coding-Sublayer */
 	qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
@@ -1383,6 +1496,9 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id)
 	}, {
 		.compatible = "qcom,qmp-v3-usb3-phy",
 		.data = &qmp_v3_usb3phy_cfg,
+	}, {
+		.compatible = "qcom,sdm845-qmp-ufs-phy",
+		.data = &sdm845_ufsphy_cfg,
 	},
 	{ },
 };
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index d1c6905..ea4b4dc 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -184,6 +184,8 @@
 #define QSERDES_V3_COM_VCO_TUNE2_MODE0			0x0f8
 #define QSERDES_V3_COM_VCO_TUNE1_MODE1			0x0fc
 #define QSERDES_V3_COM_VCO_TUNE2_MODE1			0x100
+#define QSERDES_V3_COM_VCO_TUNE_INITVAL1		0x104
+#define QSERDES_V3_COM_VCO_TUNE_INITVAL2		0x108
 #define QSERDES_V3_COM_VCO_TUNE_TIMER1			0x11c
 #define QSERDES_V3_COM_VCO_TUNE_TIMER2			0x120
 #define QSERDES_V3_COM_CLK_SELECT			0x138
@@ -211,8 +213,13 @@
 /* Only for QMP V3 PHY - RX registers */
 #define QSERDES_V3_RX_UCDR_SO_GAIN_HALF			0x00c
 #define QSERDES_V3_RX_UCDR_SO_GAIN			0x014
+#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF		0x024
+#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN_QUARTER		0x028
+#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN			0x02c
 #define QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN		0x030
 #define QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE	0x034
+#define QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW		0x03c
+#define QSERDES_V3_RX_UCDR_PI_CONTROLS			0x044
 #define QSERDES_V3_RX_RX_TERM_BW			0x07c
 #define QSERDES_V3_RX_RX_EQ_GAIN2_LSB			0x0c8
 #define QSERDES_V3_RX_RX_EQ_GAIN2_MSB			0x0cc
@@ -272,6 +279,7 @@
 #define QPHY_V3_PCS_FLL_CNT_VAL_L			0x0cc
 #define QPHY_V3_PCS_FLL_CNT_VAL_H_TOL			0x0d0
 #define QPHY_V3_PCS_FLL_MAN_CODE			0x0d4
+#define QPHY_V3_PCS_MULTI_LANE_CTRL1			0x1c4
 #define QPHY_V3_PCS_RX_SIGDET_LVL			0x1d8
 
 /* Only for QMP V3 PHY - PCS_MISC registers */
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

^ permalink raw reply related	[flat|nested] 3+ messages in thread

* Re: [PATCH v1] phy: Add QMP phy based UFS phy support for sdm845.
  2018-03-20  7:43 [PATCH v1] phy: Add QMP phy based UFS phy support for sdm845 Can Guo
@ 2018-03-20 10:07 ` Vivek Gautam
  2018-03-20 11:18   ` cang
  0 siblings, 1 reply; 3+ messages in thread
From: Vivek Gautam @ 2018-03-20 10:07 UTC (permalink / raw)
  To: Can Guo, subhashj, asutoshd, mgautam, kishon; +Cc: linux-kernel

Hi Can,


On 3/20/2018 1:13 PM, Can Guo wrote:
> Add UFS PHY support to make SDM845 UFS work with common PHY framework.
>
> Signed-off-by: Can Guo <cang@codeaurora.org>
> ---

Thanks for the patch.
Can you please include the dt binding documentation in this patch series 
and may be base it on Manu's patch for dt binding doc [1].
Please create a separate patch for binding documentation.

[1] 
http://lists-archives.com/linux-kernel/29071659-dt-bindings-phy-qcom-qmp-update-bindings-for-sdm845.html

Thanks
Vivek

>   drivers/phy/qualcomm/phy-qcom-qmp.c | 120 +++++++++++++++++++++++++++++++++++-
>   drivers/phy/qualcomm/phy-qcom-qmp.h |   8 +++
>   2 files changed, 126 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
> index 6470c5d..aeb2377 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
> @@ -156,6 +156,11 @@ enum qphy_reg_layout {
>   	[QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x170,
>   };
>   
> +static const unsigned int sdm845_ufsphy_regs_layout[] = {
> +	[QPHY_START_CTRL]		= 0x00,
> +	[QPHY_PCS_READY_STATUS]		= 0x168,
> +};
> +
>   static const struct qmp_phy_init_tbl msm8996_pcie_serdes_tbl[] = {
>   	QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x1c),
>   	QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
> @@ -490,6 +495,74 @@ enum qphy_reg_layout {
>   	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
>   };
>   
> +static const struct qmp_phy_init_tbl sdm845_ufsphy_serdes_tbl[] = {
> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x0f),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0xd5),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_CTRL, 0x00),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x04),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x05),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL1, 0xff),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL2, 0x00),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xda),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0xff),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0c),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE1, 0x98),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE1, 0x06),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE1, 0x16),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE1, 0x36),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE1, 0x3f),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE1, 0xc1),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE1, 0x00),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE1, 0x32),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE1, 0x0f),
> +
> +	/* Rate B */
> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x44),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_ufsphy_tx_tbl[] = {
> +	QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_ufsphy_rx_tbl[] = {
> +	QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_LVL, 0x24),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x0f),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_TERM_BW, 0x5b),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1d),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF, 0x04),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_QUARTER, 0x04),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN, 0x04),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x81),
> +	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
> +};
> +
> +static const struct qmp_phy_init_tbl sdm845_ufsphy_pcs_tbl[] = {
> +	QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_DOWN_CONTROL, 0x01),
> +	QMP_PHY_INIT_CFG(QPHY_V3_PCS_MULTI_LANE_CTRL1, 0x02),
> +};
> +
>   /* struct qmp_phy_cfg - per-PHY initialization config */
>   struct qmp_phy_cfg {
>   	/* phy-type - PCIE/UFS/USB */
> @@ -540,6 +613,9 @@ struct qmp_phy_cfg {
>   	/* Register offset of secondary tx/rx lanes for USB DP combo PHY */
>   	unsigned int tx_b_lane_offset;
>   	unsigned int rx_b_lane_offset;
> +
> +	/* true, if PCS block has a separate SW_RESET register */
> +	bool has_sw_rst;
>   };
>   
>   /**
> @@ -636,6 +712,10 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
>   	"aux", "cfg_ahb", "ref", "com_aux",
>   };
>   
> +static const char * const sdm845_ufs_phy_clk_l[] = {
> +	"ref_clk", "ref_aux_clk",
> +};
> +
>   /* list of resets */
>   static const char * const msm8996_pciephy_reset_l[] = {
>   	"phy", "common", "cfg",
> @@ -650,6 +730,10 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
>   	"vdda-phy", "vdda-pll",
>   };
>   
> +static const char * const sdm845_phy_vreg_l[] = {
> +	"vdda-phy", "vdda-pll",
> +};
> +
>   static const struct qmp_phy_cfg msm8996_pciephy_cfg = {
>   	.type			= PHY_TYPE_PCIE,
>   	.nlanes			= 3,
> @@ -679,6 +763,7 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
>   	.has_pwrdn_delay	= true,
>   	.pwrdn_delay_min	= POWER_DOWN_DELAY_US_MIN,
>   	.pwrdn_delay_max	= POWER_DOWN_DELAY_US_MAX,
> +	.has_sw_rst		= true,
>   };
>   
>   static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {
> @@ -704,6 +789,7 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
>   	.start_ctrl		= SERDES_START | PCS_START,
>   	.pwrdn_ctrl		= SW_PWRDN,
>   	.mask_pcs_ready		= PHYSTATUS,
> +	.has_sw_rst		= true,
>   };
>   
>   /* list of resets */
> @@ -740,6 +826,7 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
>   	.has_pwrdn_delay	= true,
>   	.pwrdn_delay_min	= 995,		/* us */
>   	.pwrdn_delay_max	= 1005,		/* us */
> +	.has_sw_rst		= true,
>   };
>   
>   static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = {
> @@ -772,6 +859,30 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
>   	.has_phy_dp_com_ctrl	= true,
>   	.tx_b_lane_offset	= 0x400,
>   	.rx_b_lane_offset	= 0x400,
> +	.has_sw_rst		= true,
> +};
> +
> +static const struct qmp_phy_cfg sdm845_ufsphy_cfg = {
> +	.type			= PHY_TYPE_UFS,
> +	.nlanes			= 2,
> +
> +	.serdes_tbl		= sdm845_ufsphy_serdes_tbl,
> +	.serdes_tbl_num		= ARRAY_SIZE(sdm845_ufsphy_serdes_tbl),
> +	.tx_tbl			= sdm845_ufsphy_tx_tbl,
> +	.tx_tbl_num		= ARRAY_SIZE(sdm845_ufsphy_tx_tbl),
> +	.rx_tbl			= sdm845_ufsphy_rx_tbl,
> +	.rx_tbl_num		= ARRAY_SIZE(sdm845_ufsphy_rx_tbl),
> +	.pcs_tbl		= sdm845_ufsphy_pcs_tbl,
> +	.pcs_tbl_num		= ARRAY_SIZE(sdm845_ufsphy_pcs_tbl),
> +	.clk_list		= sdm845_ufs_phy_clk_l,
> +	.num_clks		= ARRAY_SIZE(sdm845_ufs_phy_clk_l),
> +	.vreg_list		= sdm845_phy_vreg_l,
> +	.num_vregs		= ARRAY_SIZE(sdm845_phy_vreg_l),
> +	.regs			= sdm845_ufsphy_regs_layout,
> +
> +	.start_ctrl		= SERDES_START,
> +	.pwrdn_ctrl		= SW_PWRDN,
> +	.mask_pcs_ready		= PCS_READY,
>   };
>   
>   static void qcom_qmp_phy_configure(void __iomem *base,
> @@ -998,7 +1109,8 @@ static int qcom_qmp_phy_init(struct phy *phy)
>   		usleep_range(cfg->pwrdn_delay_min, cfg->pwrdn_delay_max);
>   
>   	/* Pull PHY out of reset state */
> -	qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
> +	if (cfg->has_sw_rst)
> +		qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
>   	if (cfg->has_phy_dp_com_ctrl)
>   		qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET);
>   
> @@ -1036,7 +1148,8 @@ static int qcom_qmp_phy_exit(struct phy *phy)
>   	clk_disable_unprepare(qphy->pipe_clk);
>   
>   	/* PHY reset */
> -	qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
> +	if (cfg->has_sw_rst)
> +		qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
>   
>   	/* stop SerDes and Phy-Coding-Sublayer */
>   	qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
> @@ -1383,6 +1496,9 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id)
>   	}, {
>   		.compatible = "qcom,qmp-v3-usb3-phy",
>   		.data = &qmp_v3_usb3phy_cfg,
> +	}, {
> +		.compatible = "qcom,sdm845-qmp-ufs-phy",
> +		.data = &sdm845_ufsphy_cfg,
>   	},
>   	{ },
>   };
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
> index d1c6905..ea4b4dc 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp.h
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
> @@ -184,6 +184,8 @@
>   #define QSERDES_V3_COM_VCO_TUNE2_MODE0			0x0f8
>   #define QSERDES_V3_COM_VCO_TUNE1_MODE1			0x0fc
>   #define QSERDES_V3_COM_VCO_TUNE2_MODE1			0x100
> +#define QSERDES_V3_COM_VCO_TUNE_INITVAL1		0x104
> +#define QSERDES_V3_COM_VCO_TUNE_INITVAL2		0x108
>   #define QSERDES_V3_COM_VCO_TUNE_TIMER1			0x11c
>   #define QSERDES_V3_COM_VCO_TUNE_TIMER2			0x120
>   #define QSERDES_V3_COM_CLK_SELECT			0x138
> @@ -211,8 +213,13 @@
>   /* Only for QMP V3 PHY - RX registers */
>   #define QSERDES_V3_RX_UCDR_SO_GAIN_HALF			0x00c
>   #define QSERDES_V3_RX_UCDR_SO_GAIN			0x014
> +#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF		0x024
> +#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN_QUARTER		0x028
> +#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN			0x02c
>   #define QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN		0x030
>   #define QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE	0x034
> +#define QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW		0x03c
> +#define QSERDES_V3_RX_UCDR_PI_CONTROLS			0x044
>   #define QSERDES_V3_RX_RX_TERM_BW			0x07c
>   #define QSERDES_V3_RX_RX_EQ_GAIN2_LSB			0x0c8
>   #define QSERDES_V3_RX_RX_EQ_GAIN2_MSB			0x0cc
> @@ -272,6 +279,7 @@
>   #define QPHY_V3_PCS_FLL_CNT_VAL_L			0x0cc
>   #define QPHY_V3_PCS_FLL_CNT_VAL_H_TOL			0x0d0
>   #define QPHY_V3_PCS_FLL_MAN_CODE			0x0d4
> +#define QPHY_V3_PCS_MULTI_LANE_CTRL1			0x1c4
>   #define QPHY_V3_PCS_RX_SIGDET_LVL			0x1d8
>   
>   /* Only for QMP V3 PHY - PCS_MISC registers */

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH v1] phy: Add QMP phy based UFS phy support for sdm845.
  2018-03-20 10:07 ` Vivek Gautam
@ 2018-03-20 11:18   ` cang
  0 siblings, 0 replies; 3+ messages in thread
From: cang @ 2018-03-20 11:18 UTC (permalink / raw)
  To: Vivek Gautam; +Cc: subhashj, asutoshd, mgautam, kishon, linux-kernel

On 2018-03-20 18:07, Vivek Gautam wrote:
> Hi Can,
> 
> 
> On 3/20/2018 1:13 PM, Can Guo wrote:
>> Add UFS PHY support to make SDM845 UFS work with common PHY framework.
>> 
>> Signed-off-by: Can Guo <cang@codeaurora.org>
>> ---
> 
> Thanks for the patch.
> Can you please include the dt binding documentation in this patch
> series and may be base it on Manu's patch for dt binding doc [1].
> Please create a separate patch for binding documentation.
> 
> [1]
> http://lists-archives.com/linux-kernel/29071659-dt-bindings-phy-qcom-qmp-update-bindings-for-sdm845.html
> 
> Thanks
> Vivek
> 

Thank you Vivek, shall re-send the patch with the dt bindings change as 
a patch series for you to review.

>>   drivers/phy/qualcomm/phy-qcom-qmp.c | 120 
>> +++++++++++++++++++++++++++++++++++-
>>   drivers/phy/qualcomm/phy-qcom-qmp.h |   8 +++
>>   2 files changed, 126 insertions(+), 2 deletions(-)
>> 
>> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c 
>> b/drivers/phy/qualcomm/phy-qcom-qmp.c
>> index 6470c5d..aeb2377 100644
>> --- a/drivers/phy/qualcomm/phy-qcom-qmp.c
>> +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
>> @@ -156,6 +156,11 @@ enum qphy_reg_layout {
>>   	[QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x170,
>>   };
>>   +static const unsigned int sdm845_ufsphy_regs_layout[] = {
>> +	[QPHY_START_CTRL]		= 0x00,
>> +	[QPHY_PCS_READY_STATUS]		= 0x168,
>> +};
>> +
>>   static const struct qmp_phy_init_tbl msm8996_pcie_serdes_tbl[] = {
>>   	QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x1c),
>>   	QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
>> @@ -490,6 +495,74 @@ enum qphy_reg_layout {
>>   	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
>>   };
>>   +static const struct qmp_phy_init_tbl sdm845_ufsphy_serdes_tbl[] = {
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x0f),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0xd5),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_CTRL, 0x00),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x04),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x05),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL1, 0xff),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL2, 0x00),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xda),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0xff),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0c),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE1, 0x98),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE1, 0x06),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE1, 0x16),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE1, 0x36),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE1, 0x3f),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE1, 0xc1),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE1, 0x00),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE1, 0x32),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE1, 0x0f),
>> +
>> +	/* Rate B */
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x44),
>> +};
>> +
>> +static const struct qmp_phy_init_tbl sdm845_ufsphy_tx_tbl[] = {
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
>> +};
>> +
>> +static const struct qmp_phy_init_tbl sdm845_ufsphy_rx_tbl[] = {
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_LVL, 0x24),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x0f),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_TERM_BW, 0x5b),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1d),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF, 0x04),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_QUARTER, 0x04),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN, 0x04),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x81),
>> +	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
>> +};
>> +
>> +static const struct qmp_phy_init_tbl sdm845_ufsphy_pcs_tbl[] = {
>> +	QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_DOWN_CONTROL, 0x01),
>> +	QMP_PHY_INIT_CFG(QPHY_V3_PCS_MULTI_LANE_CTRL1, 0x02),
>> +};
>> +
>>   /* struct qmp_phy_cfg - per-PHY initialization config */
>>   struct qmp_phy_cfg {
>>   	/* phy-type - PCIE/UFS/USB */
>> @@ -540,6 +613,9 @@ struct qmp_phy_cfg {
>>   	/* Register offset of secondary tx/rx lanes for USB DP combo PHY */
>>   	unsigned int tx_b_lane_offset;
>>   	unsigned int rx_b_lane_offset;
>> +
>> +	/* true, if PCS block has a separate SW_RESET register */
>> +	bool has_sw_rst;
>>   };
>>     /**
>> @@ -636,6 +712,10 @@ static inline void qphy_clrbits(void __iomem 
>> *base, u32 offset, u32 val)
>>   	"aux", "cfg_ahb", "ref", "com_aux",
>>   };
>>   +static const char * const sdm845_ufs_phy_clk_l[] = {
>> +	"ref_clk", "ref_aux_clk",
>> +};
>> +
>>   /* list of resets */
>>   static const char * const msm8996_pciephy_reset_l[] = {
>>   	"phy", "common", "cfg",
>> @@ -650,6 +730,10 @@ static inline void qphy_clrbits(void __iomem 
>> *base, u32 offset, u32 val)
>>   	"vdda-phy", "vdda-pll",
>>   };
>>   +static const char * const sdm845_phy_vreg_l[] = {
>> +	"vdda-phy", "vdda-pll",
>> +};
>> +
>>   static const struct qmp_phy_cfg msm8996_pciephy_cfg = {
>>   	.type			= PHY_TYPE_PCIE,
>>   	.nlanes			= 3,
>> @@ -679,6 +763,7 @@ static inline void qphy_clrbits(void __iomem 
>> *base, u32 offset, u32 val)
>>   	.has_pwrdn_delay	= true,
>>   	.pwrdn_delay_min	= POWER_DOWN_DELAY_US_MIN,
>>   	.pwrdn_delay_max	= POWER_DOWN_DELAY_US_MAX,
>> +	.has_sw_rst		= true,
>>   };
>>     static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {
>> @@ -704,6 +789,7 @@ static inline void qphy_clrbits(void __iomem 
>> *base, u32 offset, u32 val)
>>   	.start_ctrl		= SERDES_START | PCS_START,
>>   	.pwrdn_ctrl		= SW_PWRDN,
>>   	.mask_pcs_ready		= PHYSTATUS,
>> +	.has_sw_rst		= true,
>>   };
>>     /* list of resets */
>> @@ -740,6 +826,7 @@ static inline void qphy_clrbits(void __iomem 
>> *base, u32 offset, u32 val)
>>   	.has_pwrdn_delay	= true,
>>   	.pwrdn_delay_min	= 995,		/* us */
>>   	.pwrdn_delay_max	= 1005,		/* us */
>> +	.has_sw_rst		= true,
>>   };
>>     static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = {
>> @@ -772,6 +859,30 @@ static inline void qphy_clrbits(void __iomem 
>> *base, u32 offset, u32 val)
>>   	.has_phy_dp_com_ctrl	= true,
>>   	.tx_b_lane_offset	= 0x400,
>>   	.rx_b_lane_offset	= 0x400,
>> +	.has_sw_rst		= true,
>> +};
>> +
>> +static const struct qmp_phy_cfg sdm845_ufsphy_cfg = {
>> +	.type			= PHY_TYPE_UFS,
>> +	.nlanes			= 2,
>> +
>> +	.serdes_tbl		= sdm845_ufsphy_serdes_tbl,
>> +	.serdes_tbl_num		= ARRAY_SIZE(sdm845_ufsphy_serdes_tbl),
>> +	.tx_tbl			= sdm845_ufsphy_tx_tbl,
>> +	.tx_tbl_num		= ARRAY_SIZE(sdm845_ufsphy_tx_tbl),
>> +	.rx_tbl			= sdm845_ufsphy_rx_tbl,
>> +	.rx_tbl_num		= ARRAY_SIZE(sdm845_ufsphy_rx_tbl),
>> +	.pcs_tbl		= sdm845_ufsphy_pcs_tbl,
>> +	.pcs_tbl_num		= ARRAY_SIZE(sdm845_ufsphy_pcs_tbl),
>> +	.clk_list		= sdm845_ufs_phy_clk_l,
>> +	.num_clks		= ARRAY_SIZE(sdm845_ufs_phy_clk_l),
>> +	.vreg_list		= sdm845_phy_vreg_l,
>> +	.num_vregs		= ARRAY_SIZE(sdm845_phy_vreg_l),
>> +	.regs			= sdm845_ufsphy_regs_layout,
>> +
>> +	.start_ctrl		= SERDES_START,
>> +	.pwrdn_ctrl		= SW_PWRDN,
>> +	.mask_pcs_ready		= PCS_READY,
>>   };
>>     static void qcom_qmp_phy_configure(void __iomem *base,
>> @@ -998,7 +1109,8 @@ static int qcom_qmp_phy_init(struct phy *phy)
>>   		usleep_range(cfg->pwrdn_delay_min, cfg->pwrdn_delay_max);
>>     	/* Pull PHY out of reset state */
>> -	qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
>> +	if (cfg->has_sw_rst)
>> +		qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
>>   	if (cfg->has_phy_dp_com_ctrl)
>>   		qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET);
>>   @@ -1036,7 +1148,8 @@ static int qcom_qmp_phy_exit(struct phy *phy)
>>   	clk_disable_unprepare(qphy->pipe_clk);
>>     	/* PHY reset */
>> -	qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
>> +	if (cfg->has_sw_rst)
>> +		qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
>>     	/* stop SerDes and Phy-Coding-Sublayer */
>>   	qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL], 
>> cfg->start_ctrl);
>> @@ -1383,6 +1496,9 @@ int qcom_qmp_phy_create(struct device *dev, 
>> struct device_node *np, int id)
>>   	}, {
>>   		.compatible = "qcom,qmp-v3-usb3-phy",
>>   		.data = &qmp_v3_usb3phy_cfg,
>> +	}, {
>> +		.compatible = "qcom,sdm845-qmp-ufs-phy",
>> +		.data = &sdm845_ufsphy_cfg,
>>   	},
>>   	{ },
>>   };
>> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h 
>> b/drivers/phy/qualcomm/phy-qcom-qmp.h
>> index d1c6905..ea4b4dc 100644
>> --- a/drivers/phy/qualcomm/phy-qcom-qmp.h
>> +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
>> @@ -184,6 +184,8 @@
>>   #define QSERDES_V3_COM_VCO_TUNE2_MODE0			0x0f8
>>   #define QSERDES_V3_COM_VCO_TUNE1_MODE1			0x0fc
>>   #define QSERDES_V3_COM_VCO_TUNE2_MODE1			0x100
>> +#define QSERDES_V3_COM_VCO_TUNE_INITVAL1		0x104
>> +#define QSERDES_V3_COM_VCO_TUNE_INITVAL2		0x108
>>   #define QSERDES_V3_COM_VCO_TUNE_TIMER1			0x11c
>>   #define QSERDES_V3_COM_VCO_TUNE_TIMER2			0x120
>>   #define QSERDES_V3_COM_CLK_SELECT			0x138
>> @@ -211,8 +213,13 @@
>>   /* Only for QMP V3 PHY - RX registers */
>>   #define QSERDES_V3_RX_UCDR_SO_GAIN_HALF			0x00c
>>   #define QSERDES_V3_RX_UCDR_SO_GAIN			0x014
>> +#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF		0x024
>> +#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN_QUARTER		0x028
>> +#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN			0x02c
>>   #define QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN		0x030
>>   #define QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE	0x034
>> +#define QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW		0x03c
>> +#define QSERDES_V3_RX_UCDR_PI_CONTROLS			0x044
>>   #define QSERDES_V3_RX_RX_TERM_BW			0x07c
>>   #define QSERDES_V3_RX_RX_EQ_GAIN2_LSB			0x0c8
>>   #define QSERDES_V3_RX_RX_EQ_GAIN2_MSB			0x0cc
>> @@ -272,6 +279,7 @@
>>   #define QPHY_V3_PCS_FLL_CNT_VAL_L			0x0cc
>>   #define QPHY_V3_PCS_FLL_CNT_VAL_H_TOL			0x0d0
>>   #define QPHY_V3_PCS_FLL_MAN_CODE			0x0d4
>> +#define QPHY_V3_PCS_MULTI_LANE_CTRL1			0x1c4
>>   #define QPHY_V3_PCS_RX_SIGDET_LVL			0x1d8
>>     /* Only for QMP V3 PHY - PCS_MISC registers */

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2018-03-20 11:18 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-03-20  7:43 [PATCH v1] phy: Add QMP phy based UFS phy support for sdm845 Can Guo
2018-03-20 10:07 ` Vivek Gautam
2018-03-20 11:18   ` cang

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).