From: Russell King - ARM Linux <linux@armlinux.org.uk>
To: Florian Fainelli <f.fainelli@gmail.com>
Cc: netdev@vger.kernel.org,
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
Andrew Lunn <andrew@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
open list <linux-kernel@vger.kernel.org>,
Antoine Tenart <antoine.tenart@bootlin.com>,
Yan Markman <ymarkman@marvell.com>,
Stefan Chulski <stefanc@marvell.com>,
Maxime Chevallier <maxime.chevallier@bootlin.com>,
Miquel Raynal <miquel.raynal@free-electrons.com>,
Marcin Wojtas <mw@semihalf.com>
Subject: Re: [PATCH net-next 1/2] net: phy: phylink: Provide PHY interface to mac_link_{up,down}
Date: Wed, 28 Mar 2018 20:09:37 +0100 [thread overview]
Message-ID: <20180328190937.GR10980@n2100.armlinux.org.uk> (raw)
In-Reply-To: <20180328190339.31433-2-f.fainelli@gmail.com>
On Wed, Mar 28, 2018 at 12:03:38PM -0700, Florian Fainelli wrote:
> In preparation for having DSA transition entirely to PHYLINK, we need to pass a
> PHY interface type to the mac_link_{up,down} callbacks because we may have to
> make decisions on that (e.g: turn on/off RGMII interfaces etc.). We do not pass
> an entire phylink_link_state because not all parameters (pause, duplex etc.) are
> defined when the link is down, only link and interface are.
>
> Update mvneta accordingly since it currently implements phylink_mac_ops.
>
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Similar comments to previous version wrt documentation, but...
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
> ---
> drivers/net/ethernet/marvell/mvneta.c | 4 +++-
> drivers/net/phy/phylink.c | 4 +++-
> include/linux/phylink.h | 10 ++++++++--
> 3 files changed, 14 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
> index eaa4bb80f1c9..cd09bde55596 100644
> --- a/drivers/net/ethernet/marvell/mvneta.c
> +++ b/drivers/net/ethernet/marvell/mvneta.c
> @@ -3396,7 +3396,8 @@ static void mvneta_set_eee(struct mvneta_port *pp, bool enable)
> mvreg_write(pp, MVNETA_LPI_CTRL_1, lpi_ctl1);
> }
>
> -static void mvneta_mac_link_down(struct net_device *ndev, unsigned int mode)
> +static void mvneta_mac_link_down(struct net_device *ndev, unsigned int mode,
> + phy_interface_t interface)
> {
> struct mvneta_port *pp = netdev_priv(ndev);
> u32 val;
> @@ -3415,6 +3416,7 @@ static void mvneta_mac_link_down(struct net_device *ndev, unsigned int mode)
> }
>
> static void mvneta_mac_link_up(struct net_device *ndev, unsigned int mode,
> + phy_interface_t interface,
> struct phy_device *phy)
> {
> struct mvneta_port *pp = netdev_priv(ndev);
> diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
> index 51a011a349fe..9b1e4721ea3a 100644
> --- a/drivers/net/phy/phylink.c
> +++ b/drivers/net/phy/phylink.c
> @@ -470,10 +470,12 @@ static void phylink_resolve(struct work_struct *w)
> if (link_state.link != netif_carrier_ok(ndev)) {
> if (!link_state.link) {
> netif_carrier_off(ndev);
> - pl->ops->mac_link_down(ndev, pl->link_an_mode);
> + pl->ops->mac_link_down(ndev, pl->link_an_mode,
> + pl->phy_state.interface);
> netdev_info(ndev, "Link is Down\n");
> } else {
> pl->ops->mac_link_up(ndev, pl->link_an_mode,
> + pl->phy_state.interface,
> pl->phydev);
>
> netif_carrier_on(ndev);
> diff --git a/include/linux/phylink.h b/include/linux/phylink.h
> index bd137c273d38..f29a40947de9 100644
> --- a/include/linux/phylink.h
> +++ b/include/linux/phylink.h
> @@ -73,8 +73,10 @@ struct phylink_mac_ops {
> void (*mac_config)(struct net_device *ndev, unsigned int mode,
> const struct phylink_link_state *state);
> void (*mac_an_restart)(struct net_device *ndev);
> - void (*mac_link_down)(struct net_device *ndev, unsigned int mode);
> + void (*mac_link_down)(struct net_device *ndev, unsigned int mode,
> + phy_interface_t interface);
> void (*mac_link_up)(struct net_device *ndev, unsigned int mode,
> + phy_interface_t interface,
> struct phy_device *phy);
> };
>
> @@ -161,17 +163,20 @@ void mac_an_restart(struct net_device *ndev);
> * mac_link_down() - take the link down
> * @ndev: a pointer to a &struct net_device for the MAC.
> * @mode: link autonegotiation mode
> + * @interface: link &typedef phy_interface_t mode
> *
> * If @mode is not an in-band negotiation mode (as defined by
> * phylink_autoneg_inband()), force the link down and disable any
> * Energy Efficient Ethernet MAC configuration.
> */
> -void mac_link_down(struct net_device *ndev, unsigned int mode);
> +void mac_link_down(struct net_device *ndev, unsigned int mode,
> + phy_interface_t interface);
>
> /**
> * mac_link_up() - allow the link to come up
> * @ndev: a pointer to a &struct net_device for the MAC.
> * @mode: link autonegotiation mode
> + * @interface: link &typedef phy_interface_t mode
> * @phy: any attached phy
> *
> * If @mode is not an in-band negotiation mode (as defined by
> @@ -180,6 +185,7 @@ void mac_link_down(struct net_device *ndev, unsigned int mode);
> * phy_init_eee() and perform appropriate MAC configuration for EEE.
> */
> void mac_link_up(struct net_device *ndev, unsigned int mode,
> + phy_interface_t interface,
> struct phy_device *phy);
> #endif
>
> --
> 2.14.1
>
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 8.8Mbps down 630kbps up
According to speedtest.net: 8.21Mbps down 510kbps up
next prev parent reply other threads:[~2018-03-28 19:09 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-28 19:03 [PATCH net-next 0/2] phylink: API changes Florian Fainelli
2018-03-28 19:03 ` [PATCH net-next 1/2] net: phy: phylink: Provide PHY interface to mac_link_{up,down} Florian Fainelli
2018-03-28 19:09 ` Russell King - ARM Linux [this message]
2018-03-28 19:03 ` [PATCH net-next 2/2] sfp/phylink: move module EEPROM ethtool access into netdev core ethtool Florian Fainelli
2018-03-28 19:11 ` Russell King - ARM Linux
2018-03-28 19:12 ` Florian Fainelli
2018-03-28 22:02 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180328190937.GR10980@n2100.armlinux.org.uk \
--to=linux@armlinux.org.uk \
--cc=andrew@lunn.ch \
--cc=antoine.tenart@bootlin.com \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=maxime.chevallier@bootlin.com \
--cc=miquel.raynal@free-electrons.com \
--cc=mw@semihalf.com \
--cc=netdev@vger.kernel.org \
--cc=stefanc@marvell.com \
--cc=thomas.petazzoni@free-electrons.com \
--cc=ymarkman@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox